MZHOU PCIe SATA Card 6 Ports (ASM1166 Chip) Instruction Manual

1. Introduzzjoni u Fuqview

The MZHOU PCIe SATA Card is designed to expand your computer's storage capabilities by adding six 6 Gbps SATA 3.0 ports. This card utilizes the ASM1166 chip for enhanced stability and compatibility. It supports hot-swapping of devices and offers a transmission speed of up to 6.0 Gbps/s. The card is compatible with various PCI-E slots (1X, 4X, 8X, 16X) and operates across multiple systems including Windows XP, 7, 8, 10, and Linux.

Image 1.1: MZHOU SATA 3.0 Expansion Card overview, highlighting 6 ports, 108TB capacity, 6Gbps speed, and multi-system support.

2. Kontenut tal-Pakkett

Jekk jogħġbok ivverifika li l-oġġetti kollha huma preżenti fil-pakkett:

• 1 x MZHOU 6-Port SATA 3.0 Controller Card
• 6 x Kejbils tad-Data SATA
• 1 x Baxxa Profile Parentesi

Image 2.1: Contents of the product package, including the SATA controller card, six SATA cables, and a low profile parentesi.

3. Setup u Installazzjoni

3.1 Installing the PCIe SATA Card

1. Mitfi u Skonnettja: Ensure your computer is completely powered off and disconnected from the power source before opening the case.
2. Kaxxa Miftuħa tal-Kompjuter: Neħħi l-pannell tal-ġenb tal-kaxxa tal-kompjuter tiegħek biex taċċessa l-motherboard.
3. Sib Slott PCIe Disponibbli: Identify an available PCI-Express slot (PCI-E 1X, 4X, 8X, or 16X) on your motherboard.
4. Daħħal il-Karta: Gently align the PCIe SATA card with the chosen slot and press down firmly until it is securely seated. Ensure the gold contacts are fully inserted into the slot.
5. Sikura l-Kard: Use a screw to secure the card's bracket to the computer case.

Image 3.1: Illustration of inserting the PCIe card into a compatible PCI Express slot on a motherboard.

3.2 Connecting SATA Devices

Connect your SATA 3.0 devices (HDDs, SSDs) to the available SATA ports on the expansion card using the provided SATA cables. The card supports up to six SATA devices simultaneously.

Image 3.2: The PCIe SATA card with six SATA ports, demonstrating connection points for SATA devices.

3.3 Baxxa Profile Installazzjoni tal-Bracket (Mhux obbligatorju)

If your computer case requires a low-profile bracket, remove the standard bracket from the card and attach the included low-profile bracket bl-użu tal-viti pprovduti.

4. Istruzzjonijiet Operattivi

4.1 Kompatibilità tas-Sistema

The MZHOU PCIe SATA Card is compatible with the following operating systems:

• Windows XP / 7 / 8 / 10
• Linux

For Windows 7, driver installation may be required. For Windows 8, 10, and Linux, the card is typically plug-and-play, requiring no additional driver installation.

Image 4.1: The PCIe SATA card supporting various operating systems including Windows and Ubuntu.

Image 4.2: Broad compatibility of the card with Windows, Linux, and NAS/Ubuntu systems.

4.2 Hot Swap Functionality

The card supports hot-swapping, allowing you to connect or disconnect SATA devices while the system is running, provided your operating system and motherboard also support this feature.

5. Manutenzjoni

The MZHOU PCIe SATA Card is designed for reliable operation with minimal maintenance. The integrated heat sink effectively reduces the chip temperature, contributing to stable performance.

• Żomm Nadif: Periodically inspect the card and surrounding area for dust accumulation. Use compressed air to gently clean the card and its heat sink to ensure optimal cooling.
• Konnessjonijiet sikuri: Ensure all SATA cables and the PCIe card itself remain securely connected to prevent intermittent issues.

Image 5.1: The heat sink on the ASM1166 chip, designed for effective temperature reduction.

6 Issolvi l-problemi

6.1 System Drive Boot Issues

If you intend to connect your system drive (boot drive) to the PCIe SATA adapter card, consider the following conditions and solutions:

1. The SATA interface mode of the PCIe to SATA 3.0 adapter is AHCI mode. If you want to connect the system drive to the adapter card, your system drive must have been set to AHCI mode when the operating system was installed on the motherboard; otherwise, the system cannot boot through the adapter card.
2. If you are sure that the system drive was installed in AHCI mode on the motherboard's SATA interface, you can directly connect the drive to the adapter card and then enter the motherboard BIOS to set the system drive as the first boot device.
3. If both of the above conditions are met but the system still cannot boot or keeps restarting, it might be due to a conflict between the motherboard's SATA interface and the adapter card. The solution is to enter the motherboard BIOS, set the motherboard's SATA interface option to Disabled, save, and then restart to boot the system.

Image 6.1: Important considerations for booting from a drive connected to the adapter card.

6.2 Kwistjonijiet Ġenerali ta' Konnettività

• Karta Mhux Misjuba: Ensure the PCIe card is fully seated in the motherboard slot. Try a different PCIe slot if available.
• SATA Devices Not Detected: Verify that SATA cables are securely connected to both the card and the SATA devices. Check power connections to your SATA devices.
• Prestazzjoni bil-mod: Ensure you are using SATA 3.0 compatible drives and cables to achieve 6 Gbps speeds. Verify that the card is installed in a compatible PCIe slot.

7. Speċifikazzjonijiet

Image 7.1: SATA generations and their corresponding transfer rates.

8. Garanzija u Appoġġ

8.1 Garanzija tal-Prodott

This MZHOU PCIe SATA Card comes with a garanzija ta 'sena mid-data tax-xiri. Jekk jogħġbok żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.

8.2 Appoġġ għall-Klijent

MZHOU is committed to providing high-quality products and customer service. If you have any questions, encounter issues, or require assistance with your PCIe SATA card, please do not hesitate to contact us. We aim to reply to all inquiries within 12 hours.