Mahli Robotic 3-in-1 Vacuum Cleaner

Introduzzjoni

Thank you for choosing the Mahli Robotic 3-in-1 Vacuum Cleaner. This intelligent omni-directional robotic vacuum is designed to simplify your home cleaning routine, effectively cleaning hardwood and tile floors. Please read this manual thoroughly before operating the device to ensure safe and optimal performance.

Istruzzjonijiet Importanti dwar is-Sigurtà

Meta tuża apparat elettriku, għandhom dejjem jiġu segwiti prekawzjonijiet bażiċi, inklużi dawn li ġejjin:

• Aqra l-istruzzjonijiet kollha qabel tuża dan l-apparat.
• Do not operate the vacuum cleaner in areas with flammable or combustible liquids, gases, or explosive dust.
• Żomm ix-xagħar, il-ħwejjeġ maħlula, is-swaba’, u l-partijiet kollha tal-ġisem 'il bogħod mill-fetħiet u l-partijiet li jiċċaqilqu.
• Tiġborx xi ħaġa li tkun qed taħraq jew tpejjep, bħal sigaretti, lofarini, jew irmied jaħraq.
• Tużax mingħajr bin tat-trab u/jew filtri f'posthom.
• Uża biss kif deskritt f'dan il-manwal. Uża biss l-aċċessorji rakkomandati mill-manifattur.
• Tħallix li tintuża bħala ġugarell. Attenzjoni mill-qrib hija meħtieġa meta jintuża minn jew ħdejn it-tfal.
• Neħħi l-plagg mill-iżbokk meta ma tkunx qed tintuża u qabel ma tagħmel is-servizz.
• Jekk l-apparat ma jaħdimx kif suppost, twaqqa ', ġratlu l-ħsara, tħalla barra, jew niżel fl-ilma, irritornah f'ċentru ta' servizz.

Kontenut tal-Pakkett

Jekk jogħġbok iċċekkja l-kontenut tal-pakkett malli tiftaħ biex tiżgura li l-oġġetti kollha huma preżenti:

• Mahli Robotic 3-in-1 Vacuum Cleaner (MBOT3002BK)
• Iċċarġjar Cable
• Side Brushes (pre-installed or separate)
• Manwal għall-Utent (dan id-dokument)

Image: The Mahli Robotic 3-in-1 Vacuum Cleaner, showcasing its sleek, circular design and top panel.

Komponenti tal-Prodott

Familiarize yourself with the different parts of your robotic vacuum:

Immaġni: Fuq view of the Mahli Robotic Vacuum, highlighting the power button and the access panel for the dustbin.

• 1. Buttuna tal-Enerġija: Agħfas biex tibda/twaqqaf it-tindif.
• 2. Dustbin Cover: Lift to access the dustbin.
• 3. Dawl Indikatur: Shows charging status and operational mode.

Immaġni: Taħt view of the Mahli Robotic Vacuum, showing the two side brushes, driving wheels, and the removable filter compartment.

• 4. Side Brushes: Sweep debris into the vacuum's path.
• 5. Driving Wheels: Allow the vacuum to move across surfaces.
• 6. Charging Contacts: For connecting to the charging cable.
• 7. Dustbin Release: Button or latch to remove the dustbin.
• 8. Iffiltra: Captures fine dust and particles.

Setup

1. Ippakkja: Carefully remove the vacuum cleaner and all accessories from the packaging.
2. Iċċarġja Batterija: Before first use, fully charge the vacuum cleaner. Connect the charging cable to the vacuum's charging port and plug the adapter into a wall outlet. The indicator light will show charging status (e.g., red for charging, blue for fully charged). A full charge takes approximately 2 hours.
3. Installa x-Xkupilji tal-Ġenb: If not pre-installed, gently push the side brushes onto their respective posts on the bottom of the vacuum until they click into place.
4. Ipprepara ż-Żona tat-Tindif: Remove any large obstacles, loose cables, or small items from the floor that could entangle the vacuum or obstruct its path.

Istruzzjonijiet Operattivi

1. Tibda Ċiklu ta' Tindif:

   Ensure the vacuum is fully charged and placed on the floor in the area you wish to clean. Press the power button on the top of the vacuum. The indicator light will turn blue, and the vacuum will begin its cleaning cycle.
2. Stopping a Cleaning Cycle:

   To pause or stop the vacuum during operation, press the power button again. The vacuum will stop, and the indicator light may change color or turn off.

3. Tindif Awtomatiku:

   The Mahli Robotic Vacuum uses intelligent omni-directional technology to navigate and clean your floors. It will automatically adjust its path to cover the cleaning area and avoid obstacles. It is designed for hard floors such as hardwood and tile.

Manutenzjoni

Regular maintenance is crucial for optimal performance and longevity of your robotic vacuum. Always turn off the vacuum and unplug it before performing any maintenance.

1. Tbattil tal-Dustbin:

   It is recommended to empty the dustbin after each cleaning cycle or when the dustbin full indicator (if available) illuminates. Lift the dustbin cover, remove the dustbin, and empty its contents into a trash can. Rinse the dustbin with water if necessary, but ensure it is completely dry before reinserting.

2. Tindif tal-Filtru:

   The filter should be cleaned regularly, ideally after every 1-3 uses depending on usage. Tap the filter gently to remove dust. For a deeper clean, the filter can be rinsed under running water. Allow the filter to air dry completely for at least 24 hours before reinserting it into the dustbin.
3. Xkupilji tal-Ġnub tat-Tindif:

   Check the side brushes periodically for tangled hair or debris. Gently pull them off their posts to clean. If brushes are worn or damaged, replace them with new ones.

4. Roti tat-Tindif:

   Inspect the driving wheels for any hair or debris that might impede movement. Clean as needed.

5. Sensuri tat-Tindif:

   Wipe the sensors (located on the bottom and front of the vacuum) with a clean, dry cloth to ensure proper navigation.

Issolvi l-problemi

If you encounter issues with your Mahli Robotic Vacuum, please refer to the following common problems and solutions:

Speċifikazzjonijiet

Garanzija u Appoġġ

Mahli products are manufactured to the highest quality standards. For information regarding warranty coverage, technical support, or replacement parts, please refer to the warranty card included with your product or visit the official Mahli websit. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.

For further assistance, please contact Mahli Customer Service.