Compustar 2WT13R-SF 2-Way Color LCD Remote User Manual

Introduzzjoni

This manual provides essential information for the proper use and maintenance of your Compustar 2WT13R-SF 2-Way Color LCD Remote. This remote is designed to provide advanced control and feedback for compatible Compustar vehicle security and remote start systems.

Kompatibilità

Nota Importanti dwar il-Kompatibilità:

• This remote ONLY works with the Compustar PRO-T13 System. It will NOT work with other systems.
• You MUST HAVE Compustar Antenna Model ANT-2WSF biex dan ir-remote jaħdem sew.

Ensure your existing system meets these requirements before attempting to use this remote.

Prodott Overview

Karatteristiċi Ewlenin

• 2-Way Communication: Receive instant confirmation on the remote's LCD screen.
• Color LCD Display: Provides clear visual feedback on vehicle status.
• Up to 3 Mile Range: Extended operating range for convenience.
• Ergonomic Design: Comfortable to hold and use.
• Real-time Vehicle Status: Displays battery voltage and interior temperature (if supported by system).

Komponenti mill-bogħod

The Compustar 2WT13R-SF remote features a vibrant color LCD screen and intuitive buttons for controlling your vehicle's functions.

Immaġni: Quddiem view of the Compustar 2WT13R-SF remote, displaying its color LCD screen with vehicle status icons and control buttons.

Immaġni: Angolata view of the Compustar 2WT13R-SF remote, showcasing its sleek design and button placement.

Setup

This remote is a replacement or additional remote for an existing Compustar PRO-T13 system. It requires programming to your vehicle's system to function.

Important: This package DOES NOT INCLUDE programming instructions. You must use the instructions that came with your PRO-T13 system or consult a certified Compustar installer for programming.

Typically, programming involves a sequence of steps using the vehicle's ignition and the remote's buttons. Refer to your PRO-T13 system's installation or user manual for detailed programming procedures.

Operazzjoni

The 2WT13R-SF remote provides intuitive control over your vehicle's functions. The exact functions and button presses may vary slightly based on your PRO-T13 system's configuration.

Funzjonijiet Bażiċi:

• Lock: Agħfas il- Lock button (usually indicated by a closed padlock icon) once to lock your vehicle's doors. The remote will provide visual and audible confirmation.
• Nisfruttaw: Agħfas il- Nisfruttaw button (usually indicated by an open padlock icon) once to unlock your vehicle's doors. Confirmation will be displayed on the LCD.
• Bidu/Waqfien mill-Bogħod: Agħfas u żomm il- Start/Stop button (often a power icon) for approximately 2-3 seconds to remote start or stop your vehicle. The LCD will show engine status.
• Ħruġ tat-trunk: Agħfas u żomm il- Trunk button (if available, usually an open trunk icon) for 2-3 seconds to pop the trunk.
• Paniku: Agħfas u żomm il- Paniku button (if available, often a horn icon) for 2-3 seconds to activate the vehicle's alarm. Press again to disarm.

Refer to your PRO-T13 system manual for advanced features, custom button programming, and detailed LCD icon explanations.

Manutenzjoni

Sostituzzjoni tal-batterija:

The 2WT13R-SF remote uses a replaceable battery. When the battery icon on the LCD indicates low power, or the remote's range decreases significantly, it's time to replace the battery.

1. Sib il-kompartiment tal-batterija fuq wara tal-remote.
2. Carefully open the compartment using a small flat-head screwdriver or a coin.
3. Note the orientation of the old battery and remove it.
4. Insert a new battery (typically a CR2032 coin cell, but verify with your PRO-T13 manual or the remote's markings) with the positive (+) side facing up.
5. Agħlaq il-kompartiment tal-batterija sew.

Kura u Tindif:

• Evita li tesponi l-kontroll remot għal temperaturi estremi, dawl tax-xemx dirett għal perjodi twal, jew umdità eċċessiva.
• Clean the remote with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
• Protect the LCD screen from scratches. Consider purchasing a protective case.

Issolvi l-problemi

Kwistjonijiet Komuni u Soluzzjonijiet:

• Remote Mhux Jirrispondi:
  • Check the remote's battery and replace if low.
  • Ensure you are within range of the vehicle and the ANT-2WSF antenna.
  • Verify the remote is properly programmed to your PRO-T13 system. If unsure, consult your system's manual or a professional installer.
• Firxa Operattiva Qasira:
  • Replace the remote's battery.
  • Kun żgur li ma jkun hemm l-ebda ostaklu kbir (bini, għoljiet) bejn ir-remote u l-vettura.
  • Iċċekkja għal sorsi ta' interferenza tar-radju fiż-żona.
• Kwistjonijiet tal-Wiri LCD:
  • If the display is dim or flickering, replace the battery.
  • If the display is blank, ensure the remote is powered on (if applicable) and the battery is charged.

For persistent issues, contact Compustar customer support or a certified Compustar dealer.

Speċifikazzjonijiet

Garanzija u Appoġġ

This Compustar product is covered by the manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your original Compustar PRO-T13 system or visit the official Compustar websit.

For technical support, troubleshooting assistance beyond this manual, or to locate a certified installer, please contact Compustar customer service or your authorized Compustar dealer.