1. Introduzzjoni
The Thincol ARGB + PWM Hub is a versatile controller designed to manage both Addressable RGB (ARGB) lighting and Pulse Width Modulation (PWM) cooling fans within your computer system. This hub provides 8 dedicated ports for 5V 3-pin ARGB devices and 8 dedicated ports for 4-pin PWM fans, allowing for centralized control of your system's aesthetics and cooling performance. It supports both motherboard synchronization and independent remote control, offering flexibility for various system configurations.
Immaġni 1.1: Fuqview of the Thincol ARGB + PWM Hub, highlighting its synchronous motherboard light control and core advantages.
2. Kontenut tal-Pakkett
Jekk jogħġbok ivverifika li l-oġġetti kollha huma preżenti fil-pakkett tiegħek:
- 1 x ARGB + PWM Integrator Hub
- 1 x Remote Control (with built-in CR2025 button battery)
- 1 x PWM Connection Line (approx. 40cm/15.7in)
- 1 x ARGB Synchronization Cable (approx. 60cm/23.6in)
Image 2.1: The ARGB + PWM Hub shown with its remote control and connection cables.
3. Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Numru tal-Mudell | Thincol5gm78v0ay4 |
| Materjal | Acrylonitrile Butadiene Styrene (ABS) + PCB |
| Kulur | Iswed |
| Portijiet ARGB | 8 (5V 3-pin) |
| Fan Ports | 8 (4-pin PWM) |
| Sinkronizzazzjoni tal-motherboard | 1 x 5V 3-pin ARGB, 1 x PWM temperature control |
| Provvista tal-Enerġija | Enerġija SATA |
| Kontroll mill-bogħod | 21 keys, Button Battery CR2025 (140 mA) |
| PWM Line Length | Approx. 40cm / 15.7in |
| ARGB Cable Length | Approx. 60cm / 23.6in |
| Piż tal-oġġett | Appross. 120g |
4. Karatteristiċi
- 8-Way ARGB Control: Connect up to eight 5V 3-pin Addressable RGB devices for synchronized lighting effects.
- 8-Way PWM Fan Control: Manage up to eight 4-pin PWM cooling fans for optimized airflow and temperature regulation.
- Sinkronizzazzjoni tal-Motherboard: Supports direct connection to a 5V 3-pin ARGB header and a PWM header on your motherboard for software control of lighting and fan speeds.
- Operazzjoni tal-Kontroll mill-bogħod: Includes a 21-key remote for independent control of lighting effects and fan speeds, ideal for motherboards without ARGB or PWM headers.
- SATA Power Supply: Ensures stable and reliable power delivery to all connected devices, even under full load.
- Disinn tal-ġbid manjetiku: Built-in magnets allow for easy and flexible installation on any iron metal surface inside your PC chassis.
- Multi-Interface Design: Clearly labeled ports for easy and correct connection of all components.
5. Setup u Installazzjoni
Follow these steps to properly install and connect your Thincol ARGB + PWM Hub:
5.1 Pożizzjonament Fiżiku
The hub features a magnetic suction design, allowing it to be securely attached to any iron metal surface within your computer case. Choose a location that provides easy access for cable management and does not obstruct airflow.
Image 5.1: Illustrates the magnetic suction design for flexible placement inside a PC chassis.
5.2 Konnessjoni tal-Enerġija
Connect the hub to your power supply unit (PSU) using a SATA power connector. This connection is essential for the hub to function and provide stable power to all connected fans and ARGB devices.
Image 5.2: Close-up of the SATA power interface, emphasizing its importance for stable power output.
5.3 Fan and ARGB Device Connections
The hub provides 8 PWM fan ports and 8 ARGB lighting ports. Carefully connect your 4-pin PWM fans to the designated PWM ports and your 5V 3-pin ARGB devices (such as LED strips or ARGB fans) to the designated ARGB ports. Ensure correct orientation to avoid damage.
Attention: Be sure to plug in the cable only when the power is off. Do not plug into any wrong interface to avoid causing short circuits and burning the equipment!
Immaġni 5.3: Dettaljata view of the hub's multi-interface design, showing the PWM temperature control interfaces (x8) and 5V ARGB interfaces (x8).
Immaġni 5.4: Minn fuq għal isfel view of the hub, illustrating the layout and labeling of all PWM and ARGB ports.
5.4 Motherboard Synchronization Connection (Optional)
If your motherboard supports 5V 3-pin ARGB and PWM control, you can connect the provided synchronization cables to your motherboard for software control.
- Connect the 5V 3-pin ARGB synchronization cable from the hub to the 5V ARGB header on your motherboard.
- Connect the PWM temperature control cable from the hub to a 4-pin PWM fan header (e.g., CPU_FAN or SYS_FAN) on your motherboard.
Immaġni 5.5: Ġenb view of the hub, indicating the 5V ARGB motherboard control and PWM motherboard temperature control interfaces.
6. Operazzjoni
6.1 Operazzjoni tal-Kontroll mill-bogħod
The included 21-key remote control allows you to manage lighting effects and fan speeds independently. Point the remote towards the hub's receiver for optimal response.
- Power On/Off: Use the dedicated power button to turn the lighting and fans on or off.
- Color/Mode Selection: Cycle through various static colors and dynamic lighting effects using the color and mode buttons.
- Aġġustament tal-veloċità: Adjust the speed of lighting effects and fan rotation (if supported by the remote's fan control functions).
- Motherboard Sync Activation: If you wish to switch to motherboard synchronization after using the remote, press the MB key on the remote control for 6 seconds. This will transfer control to your motherboard's software.
6.2 Sinkronizzazzjoni tal-Motherboard
Once the hub is connected to your motherboard's 5V ARGB and PWM headers and the
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.