Introduzzjoni
The Concord Heritage LED Ceiling Fan is designed to provide efficient air circulation and ambient lighting for indoor spaces such as bedrooms, living rooms, and offices. This 52-inch fan features a traditional 5-blade design, an integrated LED light kit, and convenient pull chain control. Its dual-mount system allows for both flush and downrod installation, accommodating various ceiling heights.
Key features include reversible blades for year-round comfort, a powerful motor with three speed settings, and a durable steel housing with a white finish.
Informazzjoni dwar is-Sigurtà
Jekk jogħġbok aqra u ifhem l-istruzzjonijiet kollha qabel tibda l-installazzjoni. Jekk ma ssegwix dawn l-istruzzjonijiet, dan jista' jirriżulta f'xokk elettriku, nar, jew korriment personali.
- Dejjem skonnettja l-enerġija mis-circuit breaker prinċipali qabel ma tinstalla, tnaddaf, jew tagħmel manutenzjoni fuq il-fann.
- All electrical connections must be in accordance with local codes, ordinances, and the National Electric Code. If you are unfamiliar with proper electrical wiring, seek the services of a qualified electrician.
- Ensure the installation site allows the fan blades to rotate without obstruction. Maintain a minimum clearance of 7 feet from the floor to the bottom of the blades.
- L-istruttura tal-immuntar trid tkun kapaċi ssostni l-piż tal-fann (madwar 17.6 libbra).
- Tgħawwiġx il-holders tax-xafra waqt l-installazzjoni jew it-tindif.
- Ddaħħalx oġġetti fil-mogħdija tax-xfafar tal-fann waqt li l-fann ikun qed jaħdem.
- This fan is rated for indoor, dry locations only. Do not install in damp jew ambjenti mxarrba.
Kontenut tal-Pakkett
Iċċekkja li l-komponenti kollha huma preżenti qabel tibda l-installazzjoni:
- Fan Motor Housing Assembly
- 5 Xfafar tal-fann
- Blade Arms (pre-attached to blades or separate)
- Light Kit Assembly (Glass Shade, Light Fitter)
- 3 x 6.5W A15 LED Bulbs
- Bracket tal-Immuntar
- Downrod ta' 4.5 pulzieri
- Kanupew
- Pull Chains (for fan speed and light)
- Pakkett tal-Ħardwer (viti, woxers, ġewż tal-wajer, eċċ.)
Setup u Installazzjoni
This ceiling fan features a dual-mount system, allowing for either a flush mount installation (ideal for low ceilings) or a standard downrod installation. Professional installation is recommended if you are not experienced with electrical wiring.
Passi Ġenerali ta' Installazzjoni:
- Itfi l-Enerġija: Before starting, ensure power is disconnected at the circuit breaker to prevent electrical shock.
- Installazzjoni tal-Bracket tal-Immuntar: Waħħal il-bracket tal-immuntar mal-kaxxa tal-junction tas-saqaf. Kun żgur li l-kaxxa tal-junction hija mwaħħla sew mal-istruttura tal-bini u tista' ssostni l-piż tal-fann.
- Assemblea: Assemble the fan blades to the motor housing. Attach the light kit assembly to the bottom of the fan motor. Install the included LED bulbs into the light kit.
- Wiring: Connect the fan's electrical wires to the household wiring according to the wiring diagram provided in the full installation guide (not included here). Ensure all connections are secure using wire nuts.
- Immuntar tal-fann: Carefully lift the fan assembly and hang it from the mounting bracket. For downrod installation, feed the wires through the downrod and secure the downrod to the motor housing and mounting bracket. For flush mount, attach the fan directly to the mounting bracket.
- Installazzjoni tal-kanupew: Żerżaq il-kanupew 'il fuq sas-saqaf u waħħalha mal-bracket tal-immuntar, billi tgħatti l-konnessjonijiet tal-wajers.
- Kontrolli Finali: Iċċekkja l-konnessjonijiet kollha darbtejn u kun żgur li l-ebda wajer ma jkun maqbud. Irrestawra l-enerġija fis-circuit breaker.
Figura 1: B'mod ġenerali view of the Concord Heritage LED Ceiling Fan.
Figura 2: Eżample of the fan installed using the flush mount option, suitable for lower ceilings.
Figura 3: Eżample of the fan installed using the standard downrod option, providing more clearance.
Istruzzjonijiet Operattivi
The Concord Heritage LED Ceiling Fan is operated using two pull chains located on the fan's motor housing.
- Kontroll tal-veloċità tal-fann: One pull chain controls the fan speed. Pull the chain repeatedly to cycle through the three available speeds: High, Medium, Low, and Off.
- Kontroll tad-Dawl: The second pull chain controls the integrated LED light kit. Pull the chain to turn the light On or Off.
- Xfafar riversibbli: The fan features reversible blades, allowing you to change the direction of airflow. During warmer months, set the fan to rotate counter-clockwise to create a cooling breeze. In cooler months, set the fan to rotate clockwise at a low speed to circulate warm air trapped near the ceiling. The direction switch is typically located on the fan motor housing.
Manutenzjoni
Manutenzjoni regolari tiżgura l-lonġevità u l-prestazzjoni ottimali tal-fann tas-saqaf tiegħek.
- Tindif: Biex tnaddaf il-fann, imsaħ ix-xfafar u l-kaxxa tal-mutur b'ċarruta ratba u driegħ.amp drapp. Tużax prodotti tat-tindif jew solventi li joborxu, għax dawn jistgħu jagħmlu ħsara lill-finitura. Kun żgur li l-elettriku jkun mitfi qabel ma tnaddaf.
- Sostituzzjoni tal-Bozoz tad-Dawl: The fan uses three 6.5W A15 LED bulbs with a medium base. To replace bulbs, ensure power is off, allow bulbs to cool, then carefully unscrew the old bulbs and screw in the new ones.
- Bilanċ tax-Xafra: If the fan wobbles, check that all blade screws are tightened. A balancing kit (not included) can be used to correct any imbalance.
- Issikka l-Qfieli: Periodically check and tighten all screws and fasteners on the fan assembly to ensure secure operation.
Issolvi l-problemi
If you experience issues with your fan, consult the following table for common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Fan ma jibda | Ebda enerġija għall-fann Konnessjonijiet tal-wajer sfużi Kwistjoni tal-mutur | Iċċekkja s-circuit breaker u s-swiċċ tal-ħajt. Iċċekkja li l-konnessjonijiet tal-wajers kollha huma sikuri (kun żgur li l-elettriku jkun mitfi l-ewwel). Contact customer support if motor is unresponsive. |
| Fan wobbles | Viti tax-xafra maħlula Xfafar żbilanċjati Bracket tal-immuntar maħlul | Issikka l-viti tax-xafra kollha. Use a blade balancing kit (sold separately) or swap blades to find balance. Ensure mounting bracket is securely fastened to the ceiling. |
| Id-dawl ma jaħdimx | Bulbs are faulty or loose Konnessjonijiet tal-wajer sfużi Light kit issue | Check if bulbs are screwed in tightly; replace if necessary. Verify light kit wiring connections (ensure power is off first). Contact customer support if light kit is unresponsive. |
| Operazzjoni storbjuża | Viti sfużi Żanżin tal-mutur Blade rubbing | Tighten all screws on the fan. Some motor hum is normal; if excessive, contact support. Check for any obstructions or misaligned blades. |
Speċifikazzjonijiet
| Brand | Konkordju |
| Isem tal-Mudell | Heritage |
| Numru tal-Parti | 52HES5WH-MB-LED |
| Daqs | 52 Pulzier |
| Kulur | Abjad |
| Disinn tal-Fann Elettriku | Fann tas-saqaf |
| Sors tal-Enerġija | Corded Elettriku |
| Dimensjonijiet tal-Prodott | 52"D x 52"W x 18.13"H |
| Tip ta' Kamra | Kamra tas-sodda, Living Room |
| Karatteristika Speċjali | Doppju Mount |
| Użi Rakkomandati | Ċirkolazzjoni ta' l-Arja |
| Light Kit Wattage | 6.5 watts (għal kull bozza) |
| Numru ta' Xfafar | 5 |
| Kapaċità tal-Fluss tal-Ajru | 4500 Piedi Kubu Fil-Minuta |
| Voltage | 120 Volts |
| Tip ta' Swiċċ | Iġbed il-Katina |
| Piż tal-oġġett | 17.6 Liri |
| Użu fuq ġewwa/barra | Ġewwa |
| Ċertifikazzjoni | Elenkat UL |
| Numru ta 'Livelli ta' Qawwa | 3 |
| Tip ta 'Bozza | LED (A15, Medium Base) |
| UPC | 098197967923 |
Garanzija u Appoġġ
This Concord Heritage LED Ceiling Fan is backed by a Garanzija limitata għall-Ħajja tal-Mutur. This warranty covers defects in materials and workmanship of the fan motor under normal use and service.
For detailed warranty terms and conditions, please refer to the documentation included with your purchase or visit the manufacturer's official websit.
If you require technical assistance, have questions about installation, or need to claim warranty service, please contact Concord customer support. Contact information can typically be found on the product packaging or the manufacturer's websit.
