ECHOGEAR EGLF324 Full Motion TV Wall Mount Instruction Manual

1. Informazzjoni dwar is-Sigurtà

Please read this entire manual before installation and use. If you have any questions, contact ECHOGEAR customer support. Improper installation can result in property damage or personal injury.

• Kapaċità tal-piż: Do not exceed the maximum weight capacity of 110 lbs (50 kg). This mount is designed for TVs between 43" and 82".
• Stud Mounting Only: This mount is designed for installation into wood studs. MA mount into drywall alone. Ensure studs are located accurately.
• Verify VESA Pattern: Ensure your TV's VESA pattern (mounting holes on the back) is compatible with this mount (200x100 to 600x400).
• Għodod: Use appropriate tools for installation. A ratchet is recommended for securing lag bolts.
• Għajnuna: Due to the size and weight of TVs, two people are recommended for safe installation.

2. Kontenut tal-Pakkett

Verify all components are present before beginning installation. If any parts are missing or damaged, contact ECHOGEAR customer support.

Ħardwer inkluż:

• Assemblea tal-Ħajt tat-TV b'Mozzjoni Sħiħa
• Extension Brackets (for 24" stud spacing)
• Mudell tat-Tħaffir
• Assortment of TV screws and spacers
• Lag Bolts and Washers
• Cable Management Clips (2x)
• End Caps for aesthetic finishing

3. Karatteristiċi tal-prodott

The ECHOGEAR EGLF324 Full Motion TV Wall Mount offers versatile positioning and robust support for your television.

• Kompatibilità Universali: Supports 43" to 82" TVs weighing up to 110 lbs. Compatible with VESA patterns from 200x100 to 600x400.
• Flexible Stud Spacing: Designed to accommodate both 16" and 24" stud spacing with included extension brackets.
• Kapaċità ta' Mozzjoni Sħiħa: Enjoy optimal viewing angles with 19" of extension, 140° of swivel, and 15° of tilt.
• Post-Installation Adjustments: Allows for 5.4" lateral shift (left or right) and ±3° post-installation leveling for perfect screen alignment.
• Ġestjoni Integrata tal-Kejbils: Features a through-arm channel and two cable clips to keep cables organized and out of sight.

4. Installazzjoni

Follow these steps carefully to install your ECHOGEAR EGLF324 TV Wall Mount. A detailed video guide is also available below.

Passi ta' Installazzjoni:

1. Waħħal il-Brakketti mat-TV: Secure the TV brackets to the back of your television using the appropriate screws and spacers from the hardware kit.
2. Find Studs: Use a stud finder to locate the center of your wood studs in the desired mounting location. Mark the stud centers.
3. Position Drilling Template: Tape the included drilling template to the wall, aligning it with your marked stud centers. Use a level to ensure it is perfectly horizontal.
4. Drill Pilota Toqob: Drill pilot holes through the template at the marked locations.
5. Pjanċa tal-Ħajt Sikura: Attach the wall plate of the mount to the wall using the provided lag bolts and washers. If your studs are 24" apart, attach the extension brackets to the wall plate first, then secure the entire assembly to the wall.
6. Iddendel it-TV: Carefully lift your TV and hook the TV brackets onto the wall plate.
7. TV Sikura: Tighten the security screws on the TV brackets to lock the TV onto the mount.
8. Immaniġġja l-Kejbils: Route your TV cables through the integrated cable management channels on the mount arms and secure them with the included cable clips.
9. Aġġusta u Livell: Make any final adjustments to the TV's position, including lateral shift and post-installation leveling, to achieve your desired viewangolu tal-ing.

Gwida għall-Installazzjoni tal-Vidjo:

5. Istruzzjonijiet Operattivi

Once installed, your ECHOGEAR EGLF324 mount allows for easy adjustment of your TV's position.

• Estensjoni: Gently pull the TV screen forward to extend the mount up to 19 inches from the wall.
• Dawwar: Carefully push or pull the sides of the TV screen to swivel it left or right, up to 140 degrees.
• Mejjel: To adjust the tilt angle (up to 15 degrees), loosen the tilt adjustment knobs on the TV brackets, set the desired angle, and then re-tighten the knobs securely.
• Ċaqliq Laterali: For minor horizontal adjustments after installation, the TV can be slid left or right by up to 5.4 inches on the wall plate.
• Invellar: The mount allows for ±3 degrees of post-installation leveling. Consult the manual for specific instructions on how to adjust this feature.

6. Manutenzjoni

Manutenzjoni regolari tiżgura l-lonġevità u t-tħaddim sikur tal-muntatura tat-TV tiegħek.

• Kontrolli perjodiċi: Periodically check that all screws and connections are secure. Re-tighten if necessary.
• Tindif: Naddaf il-muntatura b'ċarruta ratba u niexfa. Evita prodotti tat-tindif jew solventi li joborxu.
• Lubrikazzjoni: Moving parts are designed for smooth operation and generally do not require lubrication. If movement becomes stiff, contact support.

7 Issolvi l-problemi

If you encounter issues during installation or use, refer to the following common solutions.

• TV Mhux Livell: Use the post-installation leveling feature (±3 degrees) to correct the TV's horizontal alignment. Ensure the wall plate itself was installed level.
• Difficulty Moving TV: Check for any obstructions or overtightened bolts. Ensure cables are not snagged.
• Il-Muntanja Tħossha Laxka: Immediately remove the TV and re-check all wall plate and TV bracket connections. Ensure lag bolts are securely fastened into the center of the wood studs.
• Partijiet Neqsin: Refer to the package contents list. Contact ECHOGEAR customer support for replacement parts.

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

ECHOGEAR stands by its products. For warranty information, technical assistance, or to report missing/damaged parts, please contact ECHOGEAR customer support.

Informazzjoni ta' Kuntatt: Refer to the ECHOGEAR official webis-sit jew l-imballaġġ tal-prodott għad-dettalji ta' kuntatt l-aktar riċenti.