Introduzzjoni
This manual provides essential information for the safe and efficient use of your Link2Home Wi-Fi LED BC (B22) Opal GLS Dimmable Bulb. This smart bulb offers customizable lighting with dimming, white light spectrum adjustment (2700K-6500K), and over 16 million RGB colors, controllable via the Link2Home Pro app or voice assistants.
Informazzjoni dwar is-Sigurtà
- Ensure the power is turned off at the switch before installing or removing the bulb.
- Do not use with standard dimmers. This bulb is dimmable only via the Link2Home Pro app or compatible voice assistants.
- Suitable for indoor use in dry locations only.
- Tiżżarmax jew timmodifikax il-bozza.
- Żomm fejn ma jintlaħaqx mit-tfal.
- Jekk il-bozza tkun bil-ħsara, waqqaf l-użu immedjatament.
Kontenut tal-Pakkett
- 1 x Link2Home Wi-Fi LED BC (B22) Opal GLS Dimmable Bulb
- 1 x Manwal tal-Istruzzjonijiet (dan id-dokument)
Setup
1. Installazzjoni Fiżika
- Ensure the power to the light fitting is switched off at the mains.
- Carefully screw the Link2Home Wi-Fi LED Bulb into a standard BC (B22) light fitting.
- Turn the power back on at the mains. The bulb should flash rapidly, indicating it is ready for pairing. If it does not flash, switch the bulb off and on rapidly three times to enter pairing mode.
Image: The Link2Home Wi-Fi LED Smart Bulb with its BC (B22) base, ready for installation into a compatible light fitting.
2. Installazzjoni u Tqabbil tal-App
- Niżżel il- Link2Home Pro app from the Apple App Store (for iOS 8 or later) or Google Play Store (for Android 4.1 or later).
- Register for a free Link2Home Pro account or log in if you already have one.
- In the app, tap the '+' icon or 'Add Device' to begin the pairing process.
- Select 'Lighting' or 'Light Source' and then choose the appropriate bulb type.
- Confirm that the bulb is flashing rapidly. If not, reset it by switching it off and on rapidly three times.
- Enter your Wi-Fi network details (ensure you are connected to a 2.4GHz Wi-Fi network, as 5GHz networks are not supported).
- L-app se tfittex u tikkonnettja mal-bozza. Ladarba tkun konnessa, tista' tbiddel isem il-bozza għal kontroll aktar faċli.
Rekwiżiti tas-Sistema:
- Wi-Fi Connection (2.4GHz)
- Mobile or tablet with iOS 8 or later, or Android 4.1 or later
- Link2Home Pro Account (Free)
Operating the Bulb
1. App Control (Link2Home Pro)
- Dimming: Adjust the brightness level using the dimmer slider in the app.
- White Light Spectrum: Select white light temperatures from a warm 2700K to a cool 6500K.
- Għażla tal-Kulur: Choose from over 16 million colors using the color scroll wheel.
- Timers: Set precise schedules for the bulb to turn on/off or change settings, customizable by days of the week. Countdown timers are also available.
- Raggruppament: Group multiple Link2Home smart lights together to control them simultaneously as a single unit (e.g., 'Living Room Lights').
2. Kontroll tal-Vuċi
The bulb is fully integrated with Amazon Alexa and Google Assistant. To enable voice control:
- Link your Link2Home Pro account to your Amazon Alexa or Google Assistant app.
- Skopri apparati fl-app tal-assistent tal-vuċi tiegħek.
- Uża kmandi bil-vuċi bħal:
- "Alexa, turn on [Bulb Name]"
- "Hey Google, set [Bulb Name] to 50% brightness"
- "Alexa, change [Bulb Name] to blue"
- "Hey Google, make [Bulb Name] warm white"
Manutenzjoni
- Tindif: Kun żgur li l-bozza tkun berred u li l-elettriku jkun mitfi qabel ma tnaddafha. Imsaħ b'ċarruta ratba u niexfa. Tużax prodotti tat-tindif likwidi.
- Sostituzzjoni tal-bozza: When the bulb reaches the end of its life, ensure power is off, unscrew the old bulb, and replace it with a new Link2Home Wi-Fi LED Smart Bulb.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Il-bozza ma teptipx waqt it-tqabbil. | Mhux fil-modalità ta' tqabbil. | Switch the bulb off and on rapidly three times to enter pairing mode. |
| Bulb fails to connect to Wi-Fi. | Incorrect Wi-Fi band (5GHz), weak signal, incorrect password. | Ensure your phone is connected to a 2.4GHz Wi-Fi network. Move closer to the router. Double-check Wi-Fi password. |
| Il-kontroll tal-vuċi mhux qed jaħdem. | Account not linked, device not discovered. | Ensure Link2Home Pro account is linked to Alexa/Google Assistant. Run device discovery in the voice assistant app. |
| Bulb is unresponsive. | Qawwa outage, Wi-Fi disconnected, app issue. | Check power supply. Verify Wi-Fi connection. Restart the Link2Home Pro app. |
Speċifikazzjonijiet
- Mudell: LTHB229W
- Armar: BC (B22)
- Input Wattage: 9W (ekwivalenti għal 60W)
- Lumens: 800 lm
- Ħajja Rated Medja: 15,000 sigħat
- White Light Color Temperature: 2700K - 6500K (Warm to Cool)
- Għażliet tal-Kulur: RGB (Over 16 million colors)
- Dimmable: Yes (via app/voice control)
- Konnettività: Wi-Fi (2.4GHz biss)
- Metodu ta' Kontroll: Link2Home Pro App, Amazon Alexa, Google Assistant
- Piż tal-oġġett: 80 Gramm
Garanzija u Appoġġ
For warranty information and technical support, please refer to the official Link2Home website or contact Link2Home customer service directly. Keep your purchase receipt as proof of purchase.
Informazzjoni ta' Kuntatt: Jekk jogħġbok żur www.link2home.co.uk għall-aħħar informazzjoni ta' appoġġ u dettalji ta' kuntatt.