Prodott Overview
The Hugolog Latchbolt Electronic Lock provides keyless entry and enhanced security for your home or office. Constructed from high-hardness aluminum alloy, it offers anti-collision and anti-smashing properties, meeting FCC SDOC certifications for a high safety factor. Its design integrates convenience with robust protection.
Il-karatteristiċi ewlenin jinkludu:
- Durable construction with high-hardness aluminum alloy.
- Easy installation requiring only a screwdriver.
- Keypad security with a 3-minute lockout after 10 incorrect entries.
- Back-lit keys for visibility in low light.
- Low battery status prompt.
- Klassifikazzjoni IP54 li ma jgħaddix ilma minnha għal użu barra.
Karatteristiċi Ewlenin Spjegati
This electronic lock is designed with several features to enhance security and user convenience:
- Motorized Deadbolt: Provides secure locking and unlocking.
- Auto Lock: Automatically secures the door after a set period, ensuring peace of mind.
- Key Free: Offers keyless entry via the keypad.
- 20 User Pin Codes: Allows for multiple unique access codes for different users.
- Anti-Peep Passcode: Protects your code from being observed by allowing you to enter random digits before or after your actual code.
- Indikatur tal-Istat: Provides visual feedback on the lock's status.
Kontenut tal-Pakkett
Please verify that all components are present in your package before beginning installation:
- Exterior Assembly (1)
- Interior Assembly (1)
- Bolt (1)
- Pjanċa tal-Immuntar (1)
- Battery Cover (1)
- Ċavetta tal-Backup (1)
- Viti għall-għatu (3)
- Latch/Strike Screws (2)
- Reinforcement Plate (1)
- Reinforcement Screws (2)
- Viti tal-Immuntar (2)
Gwida għall-Installazzjoni
The Hugolog Latchbolt Lock is designed for straightforward installation, typically requiring only a screwdriver. It is suitable for door thicknesses ranging from 35-50mm and door hole diameters of 38mm or 54mm. The bolt's backset can be self-adjusted to either 60mm or 70mm.
While detailed step-by-step instructions are provided in the physical manual, the general installation process involves:
- Prepare the door by ensuring the correct thickness and hole dimensions.
- Install the latch bolt into the door edge, adjusting the backset as needed.
- Mount the exterior assembly, feeding the cable through the door hole.
- Attach the mounting plate to the door.
- Qabbad il-kejbil mill-assemblaġġ ta 'barra mal-assemblaġġ ta' ġewwa.
- Waħħal l-assemblaġġ intern mal-pjanċa tal-immuntar.
- Install batteries and the battery cover.
- Test the lock's functionality using both the keypad and mechanical key.
Istruzzjonijiet Operattivi
Niftaħ il-Bieb
- Bl-użu tat-Tastiera: Enter your valid user code or master code, then press the '#' key. Rotate the lever to open the door.
- Bl-użu taċ-Ċavetta Mekkanika: Insert the backup key into the keyhole and turn to unlock the door.
Issakkar il-Bieb
- Qfil awtomatiku: The lock is equipped with an auto-lock feature that will re-lock the door automatically after a few seconds once it has been unlocked.
- Qfil Manwali: To manually lock the door, press any key on the keypad for 2 seconds.
Passcode kontra l-Peep
To prevent others from observing your passcode, you can enter random digits before or after your actual code. The lock will still recognize the correct sequence within the longer string of numbers.
Kodiċi ta' Programmazzjoni
The lock supports the creation of unique access codes for various users, with the capacity for up to 20 user PIN codes. Refer to your detailed manual for specific programming steps, which typically involve:
- L-issettjar tal-Kodiċi Master: This is the primary code used for programming and managing other user codes.
- Adding User Codes: Follow the instructions to add new individual access codes.
- Deleting User Codes: Remove existing user codes as needed.
Manutenzjoni
Sostituzzjoni tal-batterija
The lock will provide a status prompt when the battery level is less than 20%, indicating it's time to replace the batteries. Refer to the manual for instructions on accessing the battery compartment and replacing the batteries.
Tindif
To clean the lock, use a soft, dry cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or internal components.
Reżistenza għall-Ilma
The electronic latchbolt has an IP54 waterproof rating, making it suitable for daily outdoor use. However, it is not recommended for use in severe external environments where it might be exposed to extreme weather conditions or prolonged submersion.
Issolvi l-problemi
| Problema | Soluzzjoni |
|---|---|
| Keypad not responding or lock not opening with code. | Check battery level and replace if low. Ensure correct code is entered followed by '#'. If 10 incorrect attempts were made, the keypad will be locked for 3 minutes. Wait for the lockout period to expire. |
| Handle not turning or lock mechanism stuck. | Verify that the lock was installed correctly and all components are properly aligned. Ensure the bolt is not obstructed. |
| Twissija ta 'batterija baxxa. | Replace batteries immediately to ensure continued operation. |
| Lock not programming new codes. | Ensure you are following the programming steps precisely as outlined in the detailed manual. Verify the master code is correct. A factory reset may be necessary if issues persist. |
Speċifikazzjonijiet
| Proprjetà | Valur |
|---|---|
| Brand | Hugolog |
| Karatteristika Speċjali | Waterproof |
| Tip Lock | Tastiera |
| Materjal | Aluminum, Metal, Zinc |
| Użi Rakkomandati Għall-Prodott | Sigurtà |
| Stil | Ikoniku |
| Kulur | BLK |
| Numru ta' Biċċiet | 1 |
| Tip Finish | Brushed |
| Komponenti Inklużi | Backup Key*1 Exterior Assembly*1 Bolt*1 Mounting Plate*1, Interior Assembly*1 Cover Screws*3 Battery Cover*1, Latch/Strike Screws*2 Reinforcement Plate*1, Reinforcement Screws*2 Mounting Screws*2 |
| Tip ta' Kontrollur | Hand Control, Mechanical knob |
| Forma | Ovali |
| Metodu ta' Kontroll | Mess |
| Protokoll tal-Konnettività | Bluetooth |
| UPC | 711731000206 |
| Manifattur | Hugolog |
| Piż tal-oġġett | 4.97 liri |
| Dimensjonijiet tal-Pakkett | 9 x 8.6 x 3.75 pulzieri |
| Daqs | Ikoniku |
| Temm | Brushed |
| Użu | Door Thickness: 35-50mm Dimension of the door hole: 38mm/54mm Bolt ships with backset in 60mm position or 70mm backset position. |
| Batteriji Inklużi? | Nru |
| Batteriji Meħtieġa? | Nru |
| ASIN | B08FD5217Z |
| Data L-Ewwel Disponibbli | 7 ta’ Awwissu, 2020 |
Garanzija u Appoġġ
Hugolog is committed to providing a secure and convenient smart home experience. For any inquiries, technical assistance, or support, please refer to the official Hugolog resources.
Support options may include:
- Live Chat support.
- Professional customer service team.
For more information and to explore other products, visit the official Hugolog store: Hugolog Store on Amazon