Moukey Ultra-Low Noise 8-Channel Line Stereo Audio Mixer

1. Introduzzjoni

Grazzi tax-xiriasing the Moukey MAMX3 Ultra-Low Noise 8-Channel Line Stereo Audio Mixer. This manual provides detailed instructions for the proper setup, operation, and maintenance of your device. Please read this manual thoroughly before use to ensure optimal performance and to prevent damage.

Figure 1: Moukey MAMX3 8-Channel Line Stereo Audio Mixer

2. Istruzzjonijiet tas-Sigurtà

• Do not expose this device to rain or moisture to avoid fire or electric shock.
• Tiftaħx is-casing. Ġewwa m'hemm l-ebda partijiet li jistgħu jiġu rranġati mill-utent. Irreferi għal kull manutenzjoni f'idejn persunal kwalifikat.
• Tiżgura l-provvista tal-enerġija voltage jaqbel mar-rekwiżiti speċifikati fuq l-unità.
• Evita li tpoġġi l-unità ħdejn sorsi ta’ sħana jew fid-dawl tax-xemx dirett.
• Naddaf biss b'ċarruta niexfa. Tużax prodotti tat-tindif likwidi.
• Żomm fejn ma jintlaħaqx mit-tfal.

3. Karatteristiċi tal-prodott

• Input b'8 Kanal: Mix up to eight independent audio signals.
• Swiċċjar Stereo/Mono: Flexible input/output configuration for both stereo and mono signals. For stereo, use 1/4-inch (6.35mm) TRS stereo audio male-to-male cables. For mono, eight mono signal inputs are mixed into one mono signal output.
• Kontroll tal-Volum Indipendenti: Kull kanal tad-dħul għandu pum tal-volum iddedikat għal aġġustament preċiż tal-livell.
• Ultra-Low Noise Operation: Designed for minimal distortion and excellent audio performance.
• Kompatt u portabbli: Space-saving design for easy transport and setup.
• DC 5V Power Supply: Powered via DC 5V, offering versatile power options (e.g., USB port, power bank, 5V phone plug).
• Kostruzzjoni Durabbli: Ċ tal-metall robustasing tiżgura l-lonġevità.

4. Prodott Aktarview

The Moukey MAMX3 mixer features a straightforward layout for easy operation. Below are diagrams illustrating the controls and input/output ports.

Figura 2: Kontrolli tal-Panel ta' Fuq

• Input 1-8 Level Knobs: Adjust the volume for each individual input channel.
• Mono/Stereo Switches: Select between mono or stereo operation for input channels.
• Channel Output Mix L-R Switch: Combines channels 1-4 and 5-8 into a single stereo output.
• Output A/B Level Knobs: Adjust the overall output volume for Output A and Output B.

Figure 3: Rear Panel Input/Output Ports

• INPUT 1-8 (1/4" TRS/TS): Connect your audio sources here.
• OUTPUT A (1/4" TRS): Ħruġ awdjo prinċipali.
• OUTPUT B A/B L-R (1/4" TRS): Secondary audio output, can be configured for A/B or Left/Right stereo.
• DC 5V (USB-C): Port tad-dħul tal-enerġija.
• Pow Indicator: Jiddawwal meta l-unità tkun mixgħula.

Figura 4: Dimensjonijiet tal-Prodott

5. Setup

5.1 Konnessjoni tal-Enerġija

1. Locate the DC 5V USB-C port on the rear panel of the mixer.
2. Connect the provided USB cable to the mixer and to a compatible 5V power source (e.g., computer USB port, power bank, or 5V phone charger).
3. The 'Pow' indicator light will illuminate, indicating the mixer is receiving power.

Figura 5: Għażliet tal-Provvista tal-Enerġija

5.2 Konnessjonijiet tal-Input tal-Awdjo

1. Connect your audio sources (e.g., microphones, guitars, bass, keyboards, media players) to the INPUT 1-8 jacks using 1/4-inch TRS or TS cables.
2. For stereo input, use 1/4-inch (6.35mm) TRS stereo audio male-to-male cables and ensure the corresponding Mono/Stereo switch is set to 'Stereo'.
3. For mono input, use 1/4-inch TS cables and ensure the corresponding Mono/Stereo switch is set to 'Mono'.

5.3 Konnessjonijiet tal-Output tal-Awdjo

1. Connect the OUTPUT A and/or OUTPUT B jacks to your amplifier, powered speakers, or recording device using 1/4-inch TRS cables.
2. Ensure all connections are secure before proceeding to operation.

6. Istruzzjonijiet Operattivi

6.1 Tixgħel/Jitfi

The mixer powers on automatically when connected to a 5V power source. Disconnect the power cable to turn off the unit.

6.2 Adjusting Channel Levels

1. Turn all LEVEL knobs (1-8) and OUTPUT A/B knobs to their minimum position before playing any audio.
2. Ibda ddoqq l-awdjo mis-sors konness tiegħek.
3. Slowly increase the LEVEL knob for the corresponding input channel until the desired volume is achieved.
4. Adjust the OUTPUT A/B knobs to control the overall master volume.

6.3 Stereo/Mono Mode Selection

Use the Mono/Stereo switches above each channel to select the desired mode. For stereo operation, ensure you are using TRS cables for both input and output and the switch is set to 'Stereo'. For mono operation, set the switch to 'Mono'.

6.4 Mixing Multiple Sources

The MAMX3 allows you to mix up to eight line-level signals. Adjust each channel's LEVEL knob independently to create your desired mix. The Channel Output Mix L-R switch can combine channels 1-4 and 5-8 into a single stereo output for simplified routing.

Figure 6: Mixer in a typical setup

7. Manutenzjoni

• Tindif: Use a soft, dry cloth to clean the exterior of the mixer. Do not use abrasive cleaners, solvents, or waxes.
• Ħażna: When not in use for extended periods, store the mixer in a cool, dry place away from direct sunlight and extreme temperatures.
• Kura tal-Cable: Always handle cables by the connector, not the wire. Avoid bending or crimping cables excessively.

8 Issolvi l-problemi

9. Speċifikazzjonijiet

10. Garanzija u Appoġġ

This Moukey MAMX3 mixer comes with a 12-il xahar garanzija mid-data tax-xiri. Din il-garanzija tkopri difetti fil-manifattura u xogħol taħt użu normali.

Il-garanzija ma tkoprix ħsara kkawżata minn:

• Installazzjoni jew tħaddim mhux xieraq.
• Modifiki jew tiswijiet mhux awtorizzati.
• Accidents, misuse, or neglect.
• Natural disasters or power surges.

For technical support, warranty claims, or any questions regarding your Moukey MAMX3 mixer, please contact our customer service team through the retailer where you purchased the product or visit the official Moukey websit għal informazzjoni ta' kuntatt.

Nota: L-ebda vidjo uffiċjali tal-prodott URL (m3u8 format) was provided in the product data. Therefore, no video is embedded in this manual.