Introduzzjoni
This manual provides comprehensive instructions for the installation, operation, and maintenance of your new MAG Moving Magnet Cartridge with Diamond Stylus. Designed for optimal audio reproduction, this cartridge is compatible with various turntable models, including Fisher MT640, MT650, MT720, and MT125. Please read these instructions carefully to ensure proper setup and to achieve the best possible sound quality from your turntable system.
Prodott Overview
The MAG Moving Magnet Cartridge features a high-quality diamond stylus, engineered for precise tracking and excellent sound reproduction. It is designed for easy installation and provides a strong, clear audio signal.

Image: MAG Moving Magnet Cartridge with Diamond Stylus, shown with included mounting bolts.

Image: Alternate view of the MAG Moving Magnet Cartridge, highlighting its design.
Setup u Installazzjoni
Proper installation is crucial for optimal performance. The cartridge comes with free mounting bolts for secure attachment to your turntable's headshell.
Passi ta' Installazzjoni:
- Itfi: Ensure your turntable is powered off and unplugged from the mains electricity before beginning installation.
- Neħħi l-Kartriġ il-Qadim (jekk applikabbli): Carefully disconnect the wires from your old cartridge and unmount it from the headshell. Note the color coding of the wires for correct re-connection.
- Qabbad Wajers: Connect the four color-coded wires from the tonearm to the corresponding pins on the new MAG cartridge. Typically:
- Red: Right Channel (R+)
- Green: Right Channel Ground (RG-)
- White/Blue: Left Channel (L+)
- Blue: Left Channel Ground (LG-)
- Mount Cartridge: Using the provided mounting bolts, securely attach the MAG cartridge to your turntable's headshell. Do not overtighten.
- Allinja l-Kartriġ: Proper cartridge alignment (azimuth, vertical tracking angle, overhang) is essential for accurate sound reproduction and to prevent record wear. Refer to your turntable's specific manual for detailed alignment procedures.
- Issettja l-Forza tat-Traċċar: Adjust your turntable's counterweight to set the tracking force. The recommended tracking force for this cartridge is 3.0g (within a range of 2.5g to 3.5g).
- Aġġustament Kontra l-Iskjatar: Set the anti-skate mechanism on your turntable according to the recommended tracking force.
Video: This video demonstrates the general process of replacing a diamond needle stylus. While the stylus color may vary, the installation principles are similar.
Istruzzjonijiet Operattivi
Once installed and properly aligned, your MAG cartridge is ready for use. Always handle your turntable and records with care to ensure longevity and optimal sound quality.
- Record Placement: Place your record gently on the turntable platter.
- Ħjiel: Use the cueing lever to carefully lower the tonearm onto the record's lead-in groove. Avoid dropping the tonearm manually, as this can damage the stylus or record.
- Daqq: Allow the record to play. The diamond stylus will track the grooves, converting vibrations into electrical signals for amplifikazzjoni.
- Tmiem tad-Daqq: At the end of the record, use the cueing lever to lift the tonearm and return it to its rest.
Manutenzjoni
Regular maintenance of your stylus is essential for preserving sound quality and extending the life of both your cartridge and your records.
- Tindif tal-Istilus: Gently clean the stylus tip before or after each play using a soft stylus brush, moving from back to front. Never brush from side to side or front to back, as this can damage the cantilever.
- Tindif tar-Rekords: Keep your records clean to prevent dust and debris from accumulating on the stylus.
- Spezzjoni tal-Istilus: Periodically inspect the stylus for wear or damage. A worn stylus can cause poor sound quality and damage your records. Replace the stylus if it appears bent, chipped, or excessively worn.
Issolvi l-problemi
If you experience issues with your MAG cartridge, refer to the following common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Poor Sound Quality (distorted, muffled) |
|
|
| Qbiż jew Qbiż |
|
|
| No Sound or Sound from One Channel |
|
|
Speċifikazzjonijiet
| Tip | Skartoċċ Manjetiku li Jiċċaqlaq b'Labra tal-Istilus tad-Djamanti |
| Ħruġ Voltage (f'1kHz, 5 ċm/sek) | 5.5 mV ± 3dB |
| Bilanċ tal-Kanal (f'1kHz) | Taħt 1 dB |
| Separazzjoni tal-Kanali (f'1kHz) | Aktar minn 15 dB |
| Rispons ta' Frekwenza | 20Hz ~ 20kHz |
| Forza ta' Traċċar | 3.0g (recommended range: 2.5g ~ 3.5g) |
| Tip Stylus | Ponta tad-Djamant Sferika Stereo |
Compatible Turntable Models:
This cartridge is compatible with a wide range of turntables, including but not limited to:
- Fisher MT640
- Fisher MT650
- Fisher MT720
- Fisher MT125
- Amstrad CDMX500, MX300
- Audio Empire S105, S205
- Columbia DSN67
- Empire S105, S205
- Empire Scientific S105, S205
- Fiesta 300(CD), 400(CD), 600(CD), M20, MT35R, MT37R
- Fisher MT30, MT30R, ST290
- Goldring Elan, Elektra
- Japan Columbia DSN67
- NAD 533
- Nagaoka C501M-P, C502M-P, C503M-P, C51M, C55M, NT500M
- Otto ST29D, ST55D, ST57D
- Sanyo ST29D, ST55D, ST57D
- Tonar Birdie DJ
- Toshiba N15C, N50D, N50N, N51D, SR3547, SR3639, SR364, SR3648, V17, V19(CD), V27(CD), V29(CD)
Garanzija u Appoġġ
Your MAG Moving Magnet Cartridge is covered by a 6-il xahar garanzija mid-data tax-xiri, li tkopri difetti fil-manifattura. Barra minn hekk, a Politika ta' ritorn ta' 14-il jum "għal kwalunkwe raġuni" jiġi offrut.
For fitting advice, technical assistance, or warranty claims, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific contact details.