1. Prodott Aktarview
The NEEWER SC305W Heavy Duty Light Stand with Casters is designed for professional photography and videography studios. Constructed from 100% stainless steel, it offers durability and stability for various lighting equipment. The integrated casters provide easy mobility, while the adjustable height and buffer spring mechanism ensure safe and flexible operation.
Image: NEEWER SC305W Heavy Duty Light Stand with Pulleys in a studio setting, demonstrating its use with various lighting equipment.
X'hemm fil-Kaxxa:
- 1 × Stainless Steel Tripod with Casters
Karatteristiċi ewlenin:
- 360° Swivel Casters: For convenient mobility and easy positioning of heavy equipment. Features step-on brakes to secure the stand.
- Solid Stainless Steel Construction: Supports up to 66lb (30kg) and resists corrosion, suitable for various environmental conditions.
- Għoli aġġustabbli: 3-section telescopic design extends from 4.3’ to 10’ (130 to 305cm) and folds to 3.9’ (120cm).
- Folding Legs & Buffer Spring: Legs fold flat for storage. The built-in spring-loaded mechanism protects equipment from sudden drops during height adjustment.
- Kompatibilità Universali: Equipped with a universal spigot mount for strobes, monolights, ring lights, reflectors, and softboxes.
Vidjo: Overview of the NEEWER Heavy Duty Light Stand, highlighting its robust design and suitability for studio photography setups.
2. Istruzzjonijiet ta' Setup
Follow these steps to assemble and prepare your NEEWER SC305W Light Stand for use:
- Iftaħ ir-Riġlejn: Loosen the fixed knob on the stand and pull the legs apart until they are fully extended and locked into position.
- Secure the Legs: Push the fixed buckle into its designated slot to ensure the legs are securely spread and stable.
- Install Lighting Equipment: Mount your desired lighting equipment (e.g., strobe, softbox, reflector) onto the universal spigot at the top of the stand. Ensure it is firmly attached.
- Aġġusta l-Għoli: Loosen the locking knobs on each section of the telescopic pole to extend or retract the stand to your desired height. Tighten the knobs firmly to secure the height.
Image: Visual guide illustrating the four key installation steps for the light stand: loosening the knob, securing the buckle, installing equipment, and adjusting height.
Video: A demonstration on how to properly assemble and set up the NEEWER Heavy Duty Light Stand.
3. Istruzzjonijiet Operattivi
The NEEWER SC305W Light Stand is designed for versatile use in various studio and location settings.
- Aġġustament tal-Għoli: To change the height, loosen the locking knobs on the telescopic sections, carefully raise or lower the pole, and then firmly tighten the knobs to secure the desired height. The built-in buffer spring will absorb shock if a section is accidentally released.
- Nimxu l-Stand: Utilize the 360° swivel casters to smoothly roll the stand across flat surfaces. For stability, engage the step-on brakes on each caster to prevent unintended movement.
- Aċċessorji tal-Immuntar: The universal spigot is compatible with a wide range of studio lighting accessories. Ensure all mounted equipment is within the stand's maximum load capacity of 66lb (30kg).
Image: Diagram showing the adjustable height range of the NEEWER SC305W Light Stand, from minimum to maximum extension, along with its load capacity.
Vidjo: Ritorn fil-qosorview demonstrating how to fit an entire rig on this rolling C-stand, showcasing its mobility and capacity.
4. Manutenzjoni
To ensure the longevity and optimal performance of your NEEWER SC305W Light Stand, follow these maintenance guidelines:
- Tindif: Wipe down the stainless steel surfaces with a soft, damp cloth to remove dust and dirt. For stubborn marks, use a mild, non-abrasive cleaner. Avoid harsh chemicals that could damage the finish.
- Spezzjoni tal-Caster: Regularly check the casters for any debris (hair, lint, etc.) that might impede smooth rolling. Clean them as needed. Ensure the brakes engage and disengage properly.
- Lubrikazzjoni: Periodically apply a small amount of silicone-based lubricant to the telescopic sections and locking mechanisms to ensure smooth adjustment. Do not over-lubricate.
- Ħażna: When not in use, fold the stand's legs flat and store it in a dry, clean environment to prevent dust accumulation and potential corrosion.
5 Issolvi l-problemi
If you encounter issues with your NEEWER SC305W Light Stand, refer to the following common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| L-istand mhux stabbli jew jitbandal. | Legs not fully extended or locked; uneven surface; excessive load. | Ensure legs are fully extended and the buckle is engaged. Move to a flat, stable surface. Verify equipment weight does not exceed 66lb (30kg). |
| Ir-roti ma jdurux bla xkiel. | Debris in caster wheels; caster brakes engaged. | Check for and remove any debris from the caster wheels. Ensure all caster brakes are disengaged. |
| Telescopic sections are difficult to adjust. | Locking knobs too tight; lack of lubrication; dirt accumulation. | Loosen locking knobs sufficiently. Clean the sections and apply a small amount of silicone lubricant if necessary. |
| Equipment slips when adjusting height. | Locking knobs not tightened enough; buffer spring issue. | Always ensure locking knobs are firmly tightened after adjustment. If the issue persists, contact support for buffer spring inspection. |
6. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | PLUS ĠODDA |
| Isem tal-Mudell | SC305W |
| Materjal | Stainless Steel |
| Kulur | Fidda |
| Għoli Massimu | 10 saqajn (305 ċm) |
| Għoli Minimu | 4.3 saqajn (130 ċm) |
| Daqs mitwi | 3.9 saqajn (120 ċm) |
| Limitu tal-Piż | 66 Lira (30 Kilogrammi) |
| Piż tal-oġġett | 16.97 Lira (7.7 kg) |
| Karatteristika Speċjali | Adjustable, with 360° Casters and Buffer Spring |
| Apparati Kompatibbli | Camera, Strobes, Monolights, Ring Lights, Reflectors, Softboxes |
Image: Detailed product dimensions including minimum height, maximum height, and maximum load capacity of 30kg (66lbs).
7. Garanzija u Appoġġ
This NEEWER SC305W Heavy Duty Light Stand comes with a 1 Sena Garanzija tal-Manifattur.
For technical support, warranty claims, or further inquiries, please visit the official NEEWER webis-sit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom. Tista' ssib aktar informazzjoni u riżorsi ta' appoġġ billi żżur il- Ħanut NEEWER fuq Amazon.