Arlec AT0029GB
Arlec 80 lm Multi-Function Head Torch User Manual
Model: AT0029GB
Introduzzjoni
Thank you for choosing the Arlec 80 lm Multi-Function Head Torch. This head torch is designed for versatility and convenience, providing bright illumination for various activities. It features an 80 lumen 3W LED, four distinct light modes, and an adjustable head strap for comfortable wear. This manual provides essential information for the proper setup, operation, and maintenance of your head torch.
Image: The Arlec 80 lm Multi-Function Head Torch in yellow, featuring the main LED light and an adjustable black and grey headband with "HEADLIGHT" and "LED" text.
Setup
Installazzjoni tal-batterija
The Arlec Head Torch requires 3 x AAA batteries (included). Follow these steps to install or replace batteries:
- Locate the battery compartment on the back of the head torch unit.
- Open the battery compartment cover by gently pressing the latch and lifting.
- Insert 3 x AAA alkaline batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
- Agħlaq l-għatu tal-kompartiment tal-batterija sew sakemm tikklikkja f'postu.
Aġġustament tar-ras
The elastic headband is adjustable to fit various head sizes. To adjust:
- Place the head torch on your head.
- Use the adjustable buckle on the headband to tighten or loosen it until it fits comfortably and securely.
Istruzzjonijiet Operattivi
The Arlec Head Torch features 4 light modes. The power button is located on the top of the head torch unit.
Power On/Off u Għażla tal-Modalità
- L-Ewwel Press: Turns the head torch ON to the first light mode (High Brightness).
- It-Tieni Press: Switches to the second light mode (Low Brightness).
- It-Tielet Press: Switches to the third light mode (Red Light).
- Ir-Raba’ Press: Switches to the fourth light mode (Red Flashing Light).
- Il-Ħames Press: Turns the head torch OFF.
To turn off the head torch from any mode, simply cycle through the modes until it turns off, or press and hold the power button for approximately 2 seconds.
Adjusting Light Head Angle
The light head can be tilted up or down to direct the beam where needed. Gently pivot the light unit to adjust its angle.
Manutenzjoni
- Tindif: Wipe the head torch with a soft, damp drapp. Tużax tindif jew solventi li joborxu.
- Kura tal-batterija: If the head torch will not be used for an extended period, remove the batteries to prevent leakage and corrosion.
- Ħażna: Store the head torch in a cool, dry place away from direct sunlight and extreme temperatures.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Head torch does not turn on. | Il-batteriji huma mejta jew installati ħażin. | Ibdel il-batteriji b'oħrajn ġodda, filwaqt li tiżgura polarità korretta. |
| Id-dawl huwa dgħajjef. | Il-batteriji huma baxxi. | Ibdel il-batteriji. |
| Teptip ħafif. | Konnessjoni tal-batterija maħlula jew batteriji baxxi. | Check battery compartment for secure fit; replace batteries if necessary. |
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Numru tal-Mudell | AT0029GB |
| Sors tad-Dawl | 3W LED |
| Fluss Luminuż | 80 Lumens |
| Modi tad-Dawl | 4 (High, Low, Red, Red Flashing) |
| Sors tal-Enerġija | 3 x AAA Batteriji alkalini |
| Kulur | Isfar |
| Karatteristiċi Speċjali | Adjustable Headband, Adjustable Light Head |
| Piż tal-oġġett | Approx. 36.3 kg (Note: This weight seems unusually high for a head torch, likely a data entry error in source. Assuming it refers to package weight or a typo for grams.) |
Garanzija u Appoġġ
For warranty information or technical support, please refer to the product packaging or contact Arlec customer service directly. Keep your purchase receipt as proof of purchase.
Manifattur: Arlec
Data L-Ewwel Disponibbli: 13 ta’ Frar 2023
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.