Istruzzjonijiet Importanti dwar is-Sigurtà
Please read and understand all instructions before operating this product. Failure to follow these instructions may result in electric shock, fire, or other hazards. Keep this manual for future reference.
- TWISSIJA: To avoid electric shock, always unplug the lamp from the power outlet before cleaning or changing the bulb.
- Do not use with a damaged cord or plug. If the cord or plug is damaged, discontinue use immediately and contact customer service.
- Tgħaddix l-lamp in water or any other liquid. This product is not waterproof.
- Żgura li l-bozza wattage does not exceed the maximum specified (60W). Using a higher wattage bulb can cause overheating and fire.
- This product is designed for indoor use only. Do not use outdoors or in wet locations.
- Żomm 'il bogħod minn materjali li jaqbdu.
Kontenut tal-Pakkett
Ivverifika li l-komponenti kollha huma preżenti u mhux imħassra:
- Feit Electric Gray Industrial Style Table Cube Lamp Bażi (1)
- Nota: Il-bozza mhix inkluża u trid tinxtara separatament.
Image: The Feit Electric CUBE1 Industrial Style Table Lamp Base shown in its retail packaging. The packaging highlights "Vintage Industrial Style" and "e26 MEDIUM BASE", indicating the bulb type.
Setup u Installazzjoni
Follow these steps to set up your new lamp bażi:
- Spakkja l-Lamp Bażi: Neħħi b'attenzjoni l-lamp base from its packaging and place it on a clean, stable surface.
- Agħżel Bozza: Choose an E26 (medium) base bulb (not included) with a maximum wattage of 60W. For optimal performance and energy savings, an LED bulb is recommended.
- Installa l-Bozza: Tiżgura l-lamp is unplugged. Gently screw the chosen bulb clockwise into the lamp socket until it is snug. Do not overtighten, as this can damage the socket or the bulb.
- Poġġi l-Lamp: Poġġi l-lamp base on a stable, flat, and dry surface indoors, away from direct sunlight or heat sources.
- Qabbad mal-Enerġija: Ipplaggja l-lamp's power cord into a standard 120V AC electrical outlet. Ensure the plug is fully inserted.
Image: The Feit Electric CUBE1 lamp base with an Edison-style LED bulb already installed, demonstrating the appearance once assembled and ready for use.
Istruzzjonijiet Operattivi
The Feit Electric CUBE1 lamp base features a convenient in-line mechanical on/off switch for simple operation.
- Tixgħel: Locate the mechanical switch on the power cord. Press the switch to the "ON" position to illuminate the bulb.
- Itfi: Press the switch to the "OFF" position to turn off the bulb.
Immaġni: Close-up view of the black in-line mechanical on/off switch located on the braided electrical cord of the lamp, used for controlling power.
Manutenzjoni
Proper care will ensure the longevity of your lamp bażi.
- Tindif: Dejjem aqla l-lamp mill-iżbokk tad-dawl qabel it-tindif. Imsaħ l-lamp base with a soft, dry, non-abrasive cloth. Do not use liquid cleaners, abrasive cleaners, or solvents, as these may damage the finish.
- Sostituzzjoni tal-bozza: Tiżgura l-lamp is unplugged and the bulb has cooled completely before attempting to replace it. Screw out the old bulb counter-clockwise and screw in a new E26 base bulb (max 60W) clockwise.
Issolvi l-problemi
Jekk tiltaqa' ma' problemi bil-l tiegħekamp, irreferi għat-tabella li ġejja:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Lamp ma jixgħelx. | 1. Lamp mhux imqabbad. 2. Il-bozza hija maħlula jew maħruqa. 3. Power outlet is not functioning. 4. In-line switch is in the "OFF" position. | 1. Ensure the power cord is securely plugged into a working electrical outlet. 2. Tighten the bulb or replace it with a new, working E26 bulb. 3. Test the outlet with another appliance or check your home's circuit breaker. 4. Press the in-line switch to the "ON" position. |
| Lamp teptip. | 1. Il-bozza hija maħlula. 2. Bulb is incompatible or faulty. 3. Provvista ta 'enerġija instabbli. | 1. Spluggja l-lamp u issikka l-bozza. 2. Try a different E26 bulb. 3. Ipplaggja l-lamp fi żbokk differenti. |
Speċifikazzjonijiet
Key technical details for the Feit Electric CUBE1 Lamp Bażi:
| Karatteristika | Dettall |
|---|---|
| Numru tal-Mudell | KUBU1 |
| Brand | Feit Electric |
| Dimensjonijiet tal-Prodott (P x W x H) | 5.42" x 6.98" x 4" |
| Materjal Bażi | Konkrit |
| Tip ta 'Bażi tal-Bozza | E26 (Medju) |
| Wat Massimutage | 60 watt |
| Tip ta' Swiċċ | In-line Mechanical On/Off |
| Sors tal-Enerġija | Corded Elettriku |
| Użu Ambjent | Ġewwa Biss |
Garanzija u Appoġġ
This Feit Electric product is backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Feit Electric websit.
For technical assistance, troubleshooting not covered in this manual, or to inquire about warranty service, please contact Feit Electric Customer Service:
- Feit Electric Websit: www.feit.com
- Contact Us Page: www.feit.com/contact-us/
- Feit Electric Amazon Store: Żur il-Ħanut