Manwal tal-Utent tad-Drone FLYBOTIC RC 84842 SPY RACER

1. Prodott Aktarview

The Silverlit FLYBOTIC RC 84842 Spy Racer is a remote-controlled drone designed for both indoor and outdoor use. It features a built-in 0.3 MP camera for capturing photos and videos, 2.4 GHz technology for stable control, and various flight modes including 360° flips and headless mode for enhanced maneuverability.

Image: The FLYBOTIC RC 84842 Spy Racer drone in action, demonstrating its size and the remote control.

Informazzjoni dwar is-Sigurtà

WARNING: For use under direct adult supervision. Not suitable for children under 14 years due to advanced operation requirements and small parts. Keep fingers, hair, and loose clothing away from rotating propellers.

Always operate the drone in open spaces, away from people, animals, and obstacles. Do not fly near power lines, trees, or water. Ensure the drone is fully charged and the remote control has fresh batteries before each flight.

2. Kontenut tal-Pakkett

Before beginning, please ensure all items listed below are present in your package:

• FLYBOTIC RC 84842 Spy Racer Drone
• Kontroll mill-bogħod
• Kejbil tal-Iċċarġjar USB (għall-batterija tad-drone)
• Spare Propellers (if included)
• Manwal ta 'Istruzzjoni (dan id-dokument)

Image: The retail packaging of the Spy Racer drone, illustrating the main components.

3. Gwida ta' Setup

3.1. Installazzjoni tal-batterija

Batterija Drone: The drone requires 1 x 3.7V LI-ION battery (not included). Locate the battery compartment on the underside of the drone. Insert the battery, ensuring correct polarity, and close the compartment securely.

Batteriji tal-Kontroll mill-bogħod: The remote control requires 4 x AA batteries (not included). Open the battery compartment on the back of the remote control. Insert the batteries, observing the correct polarity (+/-), and replace the cover.

Image: The drone and its remote control, highlighting the main units.

3.2. Iċċarġjar tal-Batterija tad-Drone

1. Qabbad il-batterija tad-drone mal-kejbil tal-iċċarġjar USB provdut.
2. Plug the USB cable into a USB power source (e.g., computer USB port, USB wall adapter).
3. The charging indicator light on the USB cable will show the charging status (refer to cable instructions for specific light behavior).
4. L-iċċarġjar tipikament jieħu madwar 60-90 minuta. Tiċċarġjax iżżejjed.

3.3. It-tqabbil tad-Drone u l-Bogħod

1. Poġġi d-drone fuq wiċċ ċatt u livell.
2. Ixgħel is-swiċċ tal-enerġija tad-drone. Id-dwal tad-drone se jteptpu.
3. Ixgħel is-swiċċ tal-enerġija tal-kontroll remot.
4. Imbotta l-joystick tax-xellug (throttle) 'il fuq kollha, imbagħad 'l isfel kollha.
5. The drone's lights will stop flashing and become solid, indicating successful pairing.

4. Istruzzjonijiet Operattivi

4.1. Kontrolli Bażiċi tat-Titjira

Immaġni: Dettaljata view of the remote control for the Spy Racer drone.

• Joystick tax-Xellug (Throttle/Yaw):
  • Up/Down: Controls altitude (ascend/descend).
  • Left/Right: Controls yaw (rotates the drone left/right).
• Joystick tal-Lemin (Pitch/Roll):
  • Up/Down: Controls pitch (moves drone forward/backward).
  • Left/Right: Controls roll (moves drone left/right sideways).
• Buttuni tat-Trim: Used to fine-tune the drone's stability if it drifts in any direction. Adjust until the drone hovers steadily.

4.2. Modalità bla ras

Agħfas il-