Crystorama Hatfield 2 Light Vibrant Gold Sconce

1. Prodott Aktarview

The Crystorama Hatfield 2 Light Vibrant Gold Sconce is a wall-mounted lighting fixture designed for indoor use. It features a transitional design that blends modern and traditional aesthetics. The fixture includes two lights with white silk shades and a vibrant gold metal finish. Crystal accents are incorporated into the design.

Stampa 1: Quddiem view of the Crystorama Hatfield 2 Light Vibrant Gold Sconce.

2. Informazzjoni dwar is-Sigurtà

• Always turn off the main power supply at the circuit breaker before beginning installation, maintenance, or bulb replacement.
• This fixture is authorized for use in dry interior locations only. Do not install in damp jew ambjenti mxarrba.
• All electrical connections must be in accordance with local and national electrical codes. If you are unfamiliar with proper electrical wiring connections, consult a qualified electrician.
• Use only E12 Candelabra base bulbs, maximum 60 watts per light source.
• Ensure all components are securely fastened before restoring power.

3. Kontenut tal-Pakkett

Verify that all parts are present before proceeding with installation.

• Hatfield 2 Light Sconce Fixture (1)
• White Silk Shades (2)
• Mounting Hardware (Bracket, Screws, Wire Nuts)
• Istruzzjonijiet għall-installazzjoni

Nota: Bulbs are not included and must be purchased separately. Requires two E12 Candelabra base bulbs, up to 60 watts each.

4. Setup u Installazzjoni

Professional installation is recommended for electrical fixtures. Follow these general steps:

1. Itfi l-Enerġija: Locate the circuit breaker controlling the light fixture's location and turn off the power.
2. Ipprepara l-Wiċċ tal-Immuntar: Kun żgur li l-wiċċ tal-ħajt ikun nadif, niexef, u strutturalment sod biex isostni l-apparat.
3. Installa l-Bracket tal-Immuntar: Waħħal il-bracket tal-immuntar mal-kaxxa tal-junction elettrika billi tuża l-viti pprovduti.
4. Konnessjonijiet tal-Wajer: Connect the fixture's wires to the corresponding household wires (black to black, white to white, ground to ground) using wire nuts. Ensure all connections are secure.
5. Waħħal l-Apparat: Allinja bir-reqqa l-apparat mal-bracket tal-immuntar u waħħalha bil-viti pprovduti.
6. Installa Shades u Bozoz: Place the white silk shades onto the fixture. Insert two E12 Candelabra base bulbs (not included) into the sockets.
7. Irrestawra l-Enerġija: Ixgħel il-qawwa lura fis-circuit breaker.

Image 2: Dimensions of the Hatfield Sconce for installation planning.

5. Istruzzjonijiet Operattivi

Once installed and power is restored, the Crystorama Hatfield Sconce operates via a standard wall switch (not included). Simply toggle the wall switch to turn the lights on or off.

Image 3: The Hatfield Sconce providing ambient lighting in a bathroom.

6. Manutenzjoni

• Tindif: To clean the fixture, turn off the power and wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
• Sostituzzjoni tal-bozza: Ensure power is off before replacing bulbs. Allow old bulbs to cool completely. Unscrew the old bulb and screw in a new E12 Candelabra base bulb (max 60 watts).

7 Issolvi l-problemi

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

This product is covered by a manufacturer's warranty. For specific warranty details or technical support, please refer to the contact information provided with your purchase or visit the official Crystorama website. Please check your local laws before purchasindan il-prodott.