Manwal tal-Utent tat-Termometru ta' Ġewwa u Barra ThermoPro TP63B Igrometru Wireless

Introduzzjoni

Grazzi tax-xiriasing the ThermoPro TP63B Indoor Outdoor Thermometer Wireless Hygrometer. This manual provides detailed instructions for setting up, operating, and maintaining your device to ensure accurate temperature and humidity monitoring. Please read this manual thoroughly before use and keep it for future reference.

X'hemm fil-Kaxxa

• 1 x ThermoPro TP63B Main Display Unit
• 1 x ThermoPro Remote Sensor (TX-2B)
• 4 x AAA Batteries (2 for main unit, 2 for remote sensor)
• 1 x Manwal ta 'Istruzzjoni

Karatteristiċi Ewlenin

• 500FT Remote Range & Monitor 4 Locations: The wireless outdoor thermometer measures temperature & humidity from up to 500 feet away, allowing you to track environmental conditions in up to 4 locations with additional sensors (sold separately).
• Cold-Resistant & Waterproof Remote Sensor: The remote sensor is completely sealed to monitor temperature and humidity as low as -31°F (-35°C), ensuring reliable transmission even in rainy or cold weather.
• Qari preċiż: Provides accurate humidity and temperature readings with an accuracy of +/-2°F and +/-2 to 3%RH. Both Fahrenheit and Celsius units are switchable.
• Large Backlit LCD with Touch Button: The outdoor temperature thermometer features a touchable backlight, making it easy to read in dim light. The display shows current temperature and humidity readings, including trend arrows, and Max/Min records for all time or the last 24 hours.
• Għażliet multipli ta 'Immuntar: The indoor/outdoor thermometer offers versatile placement options, including a tabletop stand, magnetic back for iron surfaces, and a hang hole for wall-mounting.

The main display unit clearly shows both indoor and outdoor readings.

The remote sensor is designed to be waterproof for outdoor use.

The remote sensor is cold-resistant, operating in temperatures as low as -31°F.

Monitor multiple locations up to 500ft away with additional sensors.

The device provides high accuracy for both temperature and humidity measurements.

Setup

1. Installazzjoni tal-batterija

1. Iftaħ il-kompartiment tal-batterija fuq wara tal-unità prinċipali tal-wiri.
2. Daħħal żewġ batteriji AAA, waqt li tosserva l-polarità korretta (+/-).
3. Agħlaq il-kompartiment tal-batterija.
4. Iftaħ il-kompartiment tal-batterija fuq wara tas-sensor tar-remote.
5. Daħħal żewġ batteriji AAA, waqt li tosserva l-polarità korretta (+/-).
6. Agħlaq il-kompartiment tal-batterija.

2. Pairing Remote Sensor

The main display unit and remote sensor are pre-synchronized at the factory. If they do not connect automatically, follow these steps:

1. Place the remote sensor near the main display unit.
2. Press and hold the 'CHANNEL/SYNC' button on the back of the main unit for 3 seconds until the display flashes.
3. Press the 'TX' button inside the remote sensor's battery compartment.
4. The main unit should display the remote sensor's readings within a few minutes. If not, repeat the steps.

Istruzzjonijiet Operattivi

Qari tal-Wiri

The large LCD screen displays both indoor and outdoor temperature and humidity. The top section shows outdoor readings (OUT), and the bottom section shows indoor readings (IN). Trend arrows indicate whether the temperature or humidity is rising, falling, or remaining stable.

Jinbidlu Unitajiet tat-Temperatura (°F/°C)

Press the '°F/°C' button on the back of the main unit to switch between Fahrenheit and Celsius temperature displays.

Max/Min Records

Press the 'MAX/MIN/CLEAR' button once to view the maximum temperature and humidity recorded since the last reset. Press it again to view the minimum records. To clear the records, press and hold the 'MAX/MIN/CLEAR' button for 3 seconds.

Dawl ta' wara

Touch the light bulb icon on the front of the main display unit to activate the backlight for easy reading in low-light conditions. The backlight will automatically turn off after a few seconds to conserve battery life.

The touch-controlled backlight illuminates the display for clear visibility.

Placement & Mounting Options

The ThermoPro TP63B offers multiple convenient ways to place your unit:

• Stand tal-mejda: Use the integrated fold-out stand on the back of the main unit for placement on any flat surface.
• Dahar manjetiku: The main unit has a magnetic back, allowing it to be securely attached to metallic surfaces like refrigerators.
• Immonta fuq il-ħajt: Utilize the hang hole on the back of the main unit to mount it on a wall using a screw or nail.

Choose from tabletop, magnetic, or wall-mount options for convenient placement.

Manutenzjoni

Tindif

Imsaħ l-unità nadifa bl-adamp drapp. Tgħaddix l-unità fl-ilma jew tuża tindif li joborxu.

Sostituzzjoni tal-batterija

When the battery indicator on the display shows low power, replace the batteries in both the main unit and the remote sensor with new AAA batteries to ensure continued accurate operation.

Issolvi l-problemi

Speċifikazzjonijiet

Vidjows Uffiċjali tal-Prodott

Garanzija u Appoġġ

ThermoPro provides a 1-year warranty for this product from the date of purchase. For warranty claims, technical support, or any questions regarding your device, please visit the official ThermoPro webis-sit jew ikkuntattja s-servizz tal-konsumatur tagħhom. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.

Għal aktar informazzjoni, żur: ThermoPro Official Store