DAYBETTER 32.8ft Waterproof LED Strip Lights Kit Instruction Manual

1. Prodott Aktarview

The DAYBETTER 32.8ft Waterproof LED Strip Lights Kit provides versatile and vibrant lighting for both indoor and outdoor environments. This kit includes two 16.4ft LED strips, a 44-key IR remote controller, and a 12V power supply, offering a wide range of color-changing options and effects.

Image 1.1: Complete DAYBETTER LED Strip Lights Kit, showing two rolls of LED strips, power adapter, IR receiver, and 44-key remote control.

2. Kontenut tal-Pakkett

• 2 x 16.4ft (5m) Waterproof LED Strip Lights
• 1 x 44-Key IR Remote Controller
• 1 x IR Receiver Box
• 1 x 12V Provvista ta 'Enerġija
• Manwal għall-Utent (dan id-dokument)

3. Setup u Installazzjoni

3.1 Preparazzjoni

• Kun żgur li l-wiċċ tal-installazzjoni jkun nadif, niexef u lixx.
• Unroll the LED strips completely before powering them on to prevent overheating.
• Test the lights before final installation by connecting all components.

3.2 Dijagramma tal-Konnessjoni

Follow the diagram below to connect the LED strips to the IR receiver and power supply. Ensure the arrows on the connectors align correctly.

Image 3.1: Connection steps for the LED strip lights, IR receiver, and power adapter. Note the arrow-to-arrow alignment for proper connection.

1. Connect the two LED strip rolls to the IR receiver box. Ensure the arrows on the connectors are aligned.
2. Connect the 12V power supply to the IR receiver box.
3. Ipplaggja l-provvista tal-enerġija f'sokit elettriku standard.

3.3 Mounting the LED Strips

The LED strips feature a strong self-adhesive backing for easy mounting.

Image 3.2: Detail of the LED strip's self-adhesive backing, designed for easy and secure mounting.

4. Peel off the protective film from the adhesive backing of the LED strip.
5. Carefully press the strip onto the desired clean and dry surface. Apply firm pressure for a few seconds to ensure good adhesion.
6. The strips are cuttable at designated marks (usually indicated by a scissor icon or copper pads) to fit specific lengths. Ensure to cut only at these marks to avoid damaging the circuit.

4. Operating Instructions (44-Key IR Remote)

The included 44-key IR remote controller allows for full control over the LED strip lights. Ensure the remote is pointed towards the IR receiver box for optimal functionality.

Image 4.1: The 44-key IR remote control, used to manage colors, brightness, and lighting modes of the LED strips.

4.1 Funzjonijiet Bażiċi

• ON/OFF: Power button to turn the lights on or off.
• Kontroll tal-luminożità: Uża l- ▲ u ▼ buttuni biex taġġusta l-luminożità.
• Għażla tal-Kulur: Choose from 20 preset static colors using the color buttons.
• DIY Colors: Use the DIY buttons (DIY1-DIY6) to create and save custom colors. Press a DIY button, then use the R/G/B up/down arrows to adjust the color. Press the DIY button again to save.

4.2 Modalità Dinamika

• FLASH: Jumps between 7 colors.
• STROBE: Fades in and out of one color.
• FADE: Fades between 7 colors.
• LIXX: Fades between red, green, and blue.
• JUMP3/JUMP7: Jumps between 3 or 7 colors.
• FADE3/FADE7: Fades between 3 or 7 colors.

5. Manutenzjoni u Kura

• Tindif: Gently wipe the LED strips with a dry, soft cloth. Avoid using harsh chemicals or abrasive cleaners.
• Waterproofing: The LED strips are waterproof (resin material). However, the power supply and IR receiver box are le waterproof. Ensure these components are protected from moisture and direct water exposure.

Image 5.1: Illustration indicating that the power adapter and IR receiver are not waterproof and should be protected from water.

• Ħażna: If storing the lights for an extended period, disconnect them from power and store them in a cool, dry place.

6 Issolvi l-problemi

7. Speċifikazzjonijiet

8. Garanzija u Appoġġ

For warranty information or technical support, please refer to the product packaging or contact DAYBETTER customer service directly. Keep your purchase receipt for any warranty claims.