TSL Platinum Professional Level 8 Channel NVR – 4K User Manual

1. Introduzzjoni

This manual provides instructions for the installation, operation, and maintenance of your TSL Platinum Professional Level 8 Channel NVR (Network Video Recorder), Model LTN8708Q P8. This NVR supports up to 8 channels of IP camera input, with resolutions up to 8 Megapixels, and utilizes H.265/H.265+/H.264/H.264 Zip+/MPEG4 video formats for efficient storage and high-quality video. Please read this manual thoroughly before operating the device to ensure proper use and to prevent damage.

Kontenut tal-Pakkett

Iċċekkja li l-oġġetti kollha elenkati hawn taħt huma inklużi fil-pakkett tiegħek. Jekk xi oġġetti huma nieqsa jew bil-ħsara, jekk jogħġbok ikkuntattja lill-bejjiegħ tiegħek.

• TSL Platinum Professional Level 8 Channel NVR Unit
• Adapter tal-Enerġija
• Ġurdien USB
• Kontroll mill-bogħod
• SATA Cables (for hard drive connection)
• Mounting Screws (for hard drive)
• Gwida Quick Start

Figura 1: NVR Package Contents. This image displays the power adapter, remote control, SATA data and power cables, and mounting screws that are typically included with the NVR unit.

2. Informazzjoni dwar is-Sigurtà

Jekk jogħġbok osserva l-prekawzjonijiet ta' sigurtà li ġejjin biex tevita korriment jew ħsara lill-apparat:

• Tiżgura l-provvista tal-enerġija voltage is correct before connecting the NVR.
• Do not expose the NVR to water or moisture.
• Evita li tpoġġi l-NVR fid-dawl tax-xemx dirett jew ħdejn sorsi ta’ sħana.
• Install the NVR in a well-ventilated area to prevent overheating.
• Do not open the NVR casing. Irreferi s-servizz kollu lil persunal kwalifikat.
• Uża biss aċċessorji speċifikati mill-manifattur.

3. Prodott Aktarview

NVR Front and Rear Panels

Figura 2: NVR Front and Rear Panels. The top image shows the front panel with power, status, and Tx/Rx indicators, along with control buttons and a USB port. The bottom image displays the rear panel with PoE ports, audio in/out, LAN, HDMI, VGA, and power input.

Indikaturi u Kontrolli tal-Panel ta' Quddiem:

• QAWWA: Indikatur tal-qawwa.
• STATUS: Indikatur tal-istatus tas-sistema.
• Tx/Rx: Data transmission/reception indicator.
• Buttuni tal-Kontroll: For menu navigation and system control.
• Port USB: For mouse or USB storage device connection.

Interfejsijiet tal-Panel ta' Wara:

• PoE Ports (8 channels): Connect IP cameras directly for power and data.
• AWDJO IN/OUT: Għal apparati awdjo esterni.
• Port tal-LAN: Connect to your network router/switch.
• Ħruġ HDMI: Connect to a monitor for high-resolution video output (up to 4K).
• Ħruġ VGA: Connect to a monitor for video output (up to 1080p).
• Dħul tal-Enerġija (48V): Qabbad l-adapter tal-enerġija pprovdut.
• Swiċċ tal-Enerġija: To turn the NVR on/off.

Karatteristiċi Ewlenin

• 8 channel PoE IP camera input, supporting cameras up to 8MP with a maximum incoming bandwidth of 80Mbps.
• H.265+ / H.265 / H.264+ / H.264 video formats for efficient compression.
• 2x SATA interfaces for hard drives (hard drives are not included).
• HDMI / VGA simultaneous output. HDMI output up to 4K@30Hz, VGA output up to 1080p@60Hz.
• Appoġġ live view, storage, and playback of connected cameras.

4. Setup

4.1 Installazzjoni tal-Hard Drive (Mhux obbligatorja)

The NVR requires a hard drive for video recording. Hard drives are not included and must be purchased separately. The NVR supports up to two SATA hard drives.

1. Ħoll u neħħi l-għatu ta’ fuq tal-NVR.
2. Connect the SATA data cable and power cable to the hard drive and the corresponding ports on the NVR motherboard.
3. Waħħal il-hard drive max-chassis tal-NVR billi tuża l-viti pprovduti.
4. Erġa' poġġi l-għatu ta' fuq u waħħalha bil-viti.

4.2 Konnessjoni tal-Kameras

Connect your IP cameras to the PoE ports on the rear panel of the NVR using Ethernet cables. The PoE ports provide both power and data connection to compatible cameras.

Figura 3: Camera Wiring Compatibility. This image illustrates that a standard network cable (Ethernet/PoE) is compatible for connecting cameras to this NVR, while traditional DC power and BNC video cables are not compatible.

4.3 Connecting to a Display and Network

• Qabbad monitor mal-port tal-ħruġ HDMI jew VGA tal-NVR.
• Connect a USB mouse to one of the NVR's USB ports.
• Connect the NVR's LAN port to your network router or switch using an Ethernet cable for network access and remote viewkapaċitajiet.

4.4 Tixgħel

Connect the provided power adapter to the NVR's 48V power input and then plug it into a power outlet. Flip the power switch on the rear panel to the ON position. The NVR will boot up, and you should see the boot screen on your connected monitor.

5. Istruzzjonijiet Operattivi

5.1 Wizard tas-Setup Inizjali

Upon first boot, the NVR will guide you through an initial setup wizard. Follow the on-screen prompts to set up language, date/time, network settings, and hard drive initialization.

5.2 Ħaj View

Wara s-setup inizjali, l-NVR se juri l-istampi live view ta' kameras konnessi. Tista' taqleb bejn kamera waħda view u grilja b'ħafna kameras view using the on-screen controls or the remote control.

5.3 Ir-reġistrazzjoni

The NVR supports continuous recording, scheduled recording, and motion-triggered recording. Configure recording schedules and settings via the main menu. Ensure your hard drive is initialized and healthy for recording.

5.4 Daqq

Aċċess irreġistrat footage through the playback menu. You can search for recordings by date, time, and event type. Use the playback controls to fast forward, rewind, and pause.

5.5 Network Access and Remote Viewing

Once the NVR is connected to your network, you can access it remotely via a web browser or a dedicated mobile application. Refer to the NVR's network settings for IP address and port information. Ensure proper port forwarding is configured on your router for external access.

6. Manutenzjoni

6.1 Ġestjoni tal-Hard Drive

Regularly check the status of your hard drives through the NVR's menu. Format hard drives periodically if necessary, or configure them for overwrite mode to ensure continuous recording.

6.2 Aġġornamenti tal-Firmware

Iċċekkja l-manifattur website for available firmware updates. Keeping your NVR's firmware up-to-date ensures optimal performance and security. Follow the provided instructions carefully when performing updates.

6.3 Tindif

Clean the exterior of the NVR with a soft, dry cloth. Do not use liquid cleaners or aerosols. Ensure ventilation openings are free from dust and obstructions.

7 Issolvi l-problemi

• Ebda Qawwa:

  Ensure the power adapter is securely connected to both the NVR and a working power outlet. Check the power switch on the rear panel.
• Ebda Output tal-Vidjo:

  Verify the HDMI/VGA cable is securely connected to both the NVR and the monitor. Ensure the monitor is powered on and set to the correct input source.

• Kameras Mhux Juru:

  Check that cameras are properly connected to the PoE ports. Ensure cameras are powered on and compatible with the NVR. Verify network settings for IP cameras.

• Ebda Reġistrazzjoni:

  Confirm that a hard drive is installed and properly initialized. Check recording schedules and ensure there is sufficient disk space. Verify camera connections.
• Kwistjonijiet ta' Aċċess Remot:

  Ensure the NVR is connected to the network and has a valid IP address. Check router settings for port forwarding and firewall rules. Verify mobile app or web settings tal-browser.

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official TSL websit. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri għal talbiet ta' garanzija.

For further assistance, you may contact your local distributor or the manufacturer's customer service department.