1. Introduzzjoni
Thank you for choosing the AVANTEK CW-11 Wireless Doorbell. This manual provides detailed instructions for the installation, operation, and maintenance of your new doorbell system. Please read this manual thoroughly before use and retain it for future reference.
2. Kontenut tal-Pakkett
Ivverifika li l-komponenti kollha huma preżenti fil-pakkett:
- 1 x Riċevitur li Jipplaggja
- 1 x Trasmettitur (Buttuna tal-Imbottatura)
- 2 x Viti
- 2 x Ankri tal-ħajt
- 1 x Ċavetta Żgħira (għall-kompartiment tal-batterija)
- 1 x Tejp li jwaħħal b'żewġ naħat
- 1 x Manwal għall-Utent
Image: Contents of the AVANTEK Doorbell Kit, showing the receiver, transmitter, screws, anchors, key, and adhesive tape.
3. Prodott Aktarview
Riċevitur
- Plug-in design for easy power.
- LED indicator for visual alerts.
- Volume control buttons.
- Melody selection buttons.
- Compact design (approx. 8 cm height, 7.3 cm width) that does not obstruct adjacent power outlets.
Image: The compact receiver plugged into a wall outlet, illustrating its small size (8 cm height, 7.3 cm width) and how it leaves adjacent sockets free.
Trasmettitur
- Push button with LED indicator.
- Powered by a CR2032 lithium battery (included), offering up to 3 years of lifespan.
- IP55 dustproof and waterproof rating, suitable for outdoor use in temperatures from -20°C to +60°C.
Image: The doorbell transmitter highlighting its IP55 dustproof and waterproof features, with illustrations of its resilience in both cold (-20°C) and hot (60°C) weather, and a 3-year maximum battery lifespan.
4. Setup
4.1 Installazzjoni tat-Trasmettitur
The transmitter can be installed using either the provided screws and anchors or the double-sided adhesive tape.
- Metodu tat-Tejp Adeżiv: Clean the desired mounting surface thoroughly. Peel off one side of the protective film from the double-sided adhesive tape and attach it to the back of the transmitter. Peel off the other side and firmly press the transmitter onto the wall for at least 30 seconds.
- Screw-in Method: Mark the desired mounting location. Drill two holes at the marked spots. Insert the wall anchors into the holes. Align the transmitter's mounting holes with the anchors and secure it with the screws.
4.2 Setup tar-Riċevitur
Simply plug the receiver into any standard indoor power outlet. The receiver's LED will flash, indicating it is powered on and ready for pairing.
4.3 Pairing the Transmitter and Receiver
The doorbell system is pre-paired at the factory. If re-pairing is needed or if you are adding additional transmitters/receivers:
- Ipplaggja r-riċevitur.
- Press and hold the volume button on the receiver for 3 seconds until its LED starts flashing. This indicates pairing mode.
- Within 5 seconds, press the transmitter button. The receiver's LED will flash, and it will play its current melody once, indicating successful pairing.
- If pairing fails, repeat the steps.
Video: This video demonstrates how to pair the AVANTEK wireless doorbell system components, including activating the receiver and transmitter for pairing.
5. Operazzjoni
5.1 Tibdil fil-Melodiji
Ir-riċevitur joffri 52 melodija distinta. Biex tibdel il-melodija:
- Agħfas il-buttuna 'Li Jmiss' jew 'Preċedenti' fuq il-ġenb tar-riċevitur biex tgħaddi mill-melodiji disponibbli.
- The receiver will play each melody as you select it.
- The memory function ensures your last selected melody is retained even after a power outage.
Image: The doorbell receiver displaying its features: 52 chimes and tunes, 5 volume levels, and an LED indicator. Examples of melodies like 'Canon' and 'Ding-Dong' are shown.
5.2 Aġġustament tal-Volum
The receiver has 5 adjustable volume levels, with a maximum sound intensity of 115 dB. To adjust the volume:
- Agħfas il-buttuna tal-'Volum' fuq il-ġenb tar-riċevitur ripetutament biex tgħaddi mill-5 livelli tal-volum.
- The receiver will play a sound at each level to indicate the current volume.
- The memory function retains your last selected volume level.
5.3 Silent Mode (LED Notification)
For situations requiring silence, such as during sleep or meetings, the receiver can be set to silent mode, where it only provides a visual LED notification.
- Cycle through the volume levels until the mute icon is displayed or the sound is off. The LED will still flash when the doorbell is pressed.
Image: The doorbell receiver illustrating its silent LED notification mode and the range of 5 adjustable volume levels (0-115 dB), with examples of typical sound environments.
Video: This video demonstrates how to adjust the volume and activate the silent mode on the AVANTEK wireless doorbell receiver.
6. Manutenzjoni
6.1 Sostituzzjoni tal-Batterija (Trasmettitur)
The transmitter uses a CR2032 lithium battery with an average lifespan of 3 years. When the transmitter's LED no longer lights up or the range decreases significantly, it's time to replace the battery.
- Use the small key (or a small flat-head screwdriver) to open the battery compartment on the side of the transmitter.
- Neħħi l-batterija CR2032 il-qadima bir-reqqa.
- Daħħal batterija CR2032 ġdida bin-naħa pożittiva (+) tħares 'il fuq.
- Agħlaq il-kompartiment tal-batterija sew.
6.2 Tindif
Imsaħ l-unitajiet tal-qanpiena tal-bieb b'ċarruta ratba u niexfa. Tużax prodotti tat-tindif jew solventi li joborxu, għax jistgħu jagħmlu ħsara lill-wiċċ.
7 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Il-qanpiena tal-bieb ma tdoqqx. | Receiver not plugged in or powered off. Transmitter battery is dead. Units are not paired. | Ensure receiver is plugged in and powered. Replace transmitter battery. Re-pair the units (see Section 4.3). |
| Firxa qasira mingħajr fili. | Ostruzzjonijiet (ħitan ħoxnin, strutturi tal-metall). Interferenza minn apparati oħra. Batterija baxxa tat-trasmettitur. | Irriloka r-riċevitur jew it-trasmettitur biex timminimizza l-ostruzzjonijiet. Ibdel il-batterija tat-trasmettitur. |
| L-LED tar-riċevitur jteptep imma ma jagħmel l-ebda ħoss. | Receiver is in silent (mute) mode. Volume is set to minimum. | Adjust the volume level (see Section 5.2). |
| Cannot change melody. | Buttuni mhux ippressati sew. | Ensure you are pressing the 'Next' or 'Previous' melody buttons firmly. |
8. Speċifikazzjonijiet
- Mudell: CW-11 / SB-122
- Ditta: AVANTEK
- Medda bla fili: Sa 300 metru (1000 pied) fl-arja aperta
- Melodiji: 52 chimes li jistgħu jintgħażlu
- Livelli tal-Volum: 5 adjustable levels (0-115 dB)
- Batterija tat-Trasmettitur: 1 x CR2032 Lithium (inkluża)
- Ħajja tal-Batterija tat-Trasmettitur: Sa 3 snin
- Qawwa tar-riċevitur: AC 100-240V (Jista' jiġi pplaggjat)
- Temperatura operattiva: -20°C sa +60°C (-4°F sa +140°F)
- Klassifikazzjoni li ma jgħaddix ilma minnha: IP55 (Trasmettitur)
- Ċertifikazzjonijiet: CE, FCC, RoHS
- Dimensjonijiet (Riċevitur): Madwar 11.4 x 9.5 x 6.9 ċm
- Piż: 159 grams (total package)
- Metodu ta' Installazzjoni: Self-adhesive or Screw-in
Image: Diagram illustrating the 300-meter (1000 ft) wireless range of the AVANTEK doorbell system within a multi-story home environment.
Vidjo: Dan il-vidjo jipprovdi aktar minnview of the AVANTEK Mini Doorbell Kit, demonstrating its features like instant pairing of multiple receivers, silent mode, and IP55 weather resistance.
9. Garanzija u Appoġġ
AVANTEK products come with a standard manufacturer's warranty. For specific warranty details, technical support, or any inquiries, please refer to the contact information provided on the product packaging or visit the official AVANTEK website. Please note that compatibility for products purchased before 2021 may vary; contact customer support for verification.