Feit Electric BR40 Dimmable LED Floodlight User Manual

Introduzzjoni

Thank you for choosing the Feit Electric BR40 Dimmable LED Floodlight. This energy-efficient LED bulb is designed to replace traditional 75-watt incandescent floodlights, consuming only 11.8 watts while providing 1065 lumens of soft white 2700K light. It is suitable for various indoor applications, including track lighting and recessed fixtures, offering a wide 110-degree beam spread. With a lifespan of up to 15,000 hours, this ENERGY STAR qualified bulb is built for long-lasting performance and significant energy savings.

Immaġni: Quddiem view of the Feit Electric BR40 Dimmable LED Floodlight 2-pack packaging, highlighting its LED, dimmable, flood, 1065 lumens, 11.8 watts, 15,000 life hours, and 75W replacement features.

Informazzjoni dwar is-Sigurtà

TWISSIJA:

• Dan l-apparat jikkonforma mal-Parti 15 tar-Regoli tal-FCC. It-tħaddim huwa soġġett għaż-żewġ kundizzjonijiet li ġejjin: (1) Dan l-apparat ma jistax jikkawża interferenza ta 'ħsara, u (2) dan l-apparat għandu jaċċetta kwalunkwe interferenza riċevuta, inkluż interferenza li tista' tikkawża tħaddim mhux mixtieq.
• This equipment has been tested and found to comply with the limits for a Class B digital device. It generates, uses, and can radiate radio frequency energy. If not installed and used according to instructions, it may cause harmful interference to radio communications.
• Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment.

ATTENZJONI:

• Use only on 120 volt, 60Hz circuits.
• Adattat għal damp postijiet.
• Minimum operating temperature: -25°C (-13°F).
• Dan l-apparat mhuwiex maħsub għall-użu ma’ attrezzaturi ta’ ħruġ ta’ emerġenza jew dwal ta’ emerġenza.
• Lamp may not be compatible with all dimmers. For dimmer compatibility information, visit www.feit.com or call 1-866-329-BULB.
• When installing or replacing, ensure that power is switched off at the circuit breaker before connecting or disconnecting to the fixture.

Immaġni: Wara view of the Feit Electric BR40 Dimmable LED Floodlight packaging, showing detailed specifications, warranty information, and safety warnings.

Setup u Installazzjoni

1. Itfi: Before beginning installation, ensure the power to the light fixture is switched off at the circuit breaker to prevent electrical shock.
2. Neħħi l-Bozza Qadima: Carefully unscrew and remove the existing bulb from the fixture. Allow the old bulb to cool if it has been recently in use.
3. Install New LED Bulb: Screw the Feit Electric BR40 Dimmable LED Floodlight into the standard E26 medium screw base socket until it is finger-tight. Do not overtighten.
4. Irrestawra l-Enerġija: Once the bulb is securely installed, restore power at the circuit breaker.
5. Applikazzjoni: This BR40 floodlight is designed for track lighting and recessed applications, providing a wide beam of light.

Immaġni: Ġenb view of the Feit Electric BR40 Dimmable LED Floodlight packaging, illustrating its wide light distribution and suitability for track and recessed applications.

Istruzzjonijiet Operattivi

The Feit Electric BR40 LED Floodlight is designed for simple operation in compatible fixtures.

• Operazzjoni Standard: Once installed and power is restored, the bulb will illuminate when the light switch is turned on.
• Funzjonalità Dimmable: This LED bulb is dimmable. For optimal performance and to avoid flickering or buzzing, use with LED-compatible dimmer switches. If you experience issues with your current dimmer, consult www.feit.com for a list of compatible dimmers or contact customer support.
• Użu fuq ġewwa: This bulb is intended for indoor use in dry or damp postijiet.

Manutenzjoni

Feit Electric LED bulbs require minimal maintenance due to their long lifespan and durable design.

• Tindif: Kun żgur li l-bozza tkun mitfija qabel ma tnaddafha. Imsaħ il-bozza b'ċarruta ratba u niexfa. Tużax prodotti tat-tindif likwidi jew materjali li joborxu.
• Sostituzzjoni: Replace the bulb only after it has cooled down completely.
• Rimi: Dispose of LED bulbs according to local regulations for electronic waste.

Issolvi l-problemi

If you encounter issues with your Feit Electric BR40 LED Floodlight, consider the following:

• Il-bozza ma tixgħelx:
  1. Ensure the bulb is screwed in securely into the socket.
  2. Check if the power switch is on and the circuit breaker has not tripped.
  3. Ittestja l-bozza f'apparat differenti, li jaf li jaħdem.
• Teptip jew żanżin:
  1. This often indicates incompatibility with the dimmer switch. Ensure you are using an LED-compatible dimmer.
  2. Żur www.feit.com for a list of recommended dimmers or contact customer support.
• Radio or TV Interference:
  1. If the bulb causes interference, try reorienting or relocating the receiving antenna.
  2. Increase the separation between the light fixture and the affected receiver.
  3. Connect the light fixture to an outlet on a different circuit from the receiver.
  4. Consult a dealer or an experienced radio/TV technician for further assistance.

Speċifikazzjonijiet

Garanzija u Appoġġ

Garanzija: This Feit Electric LED lamp comes with a 5-year, free replacement warranty. If the product fails or you are not satisfied with its performance, please contact Feit Electric directly. This replacement is the sole remedy available, and liability for incidental or consequential damage is expressly excluded.

Informazzjoni ta' Kuntatt:

• Websit: www.feit.com
• Email: info@feit.com
• Numru bla ħlas: 1-866-329-BULB (1-866-329-2852)

Manifattur:
Feit Electric Company
Pico Rivera, CA 90660
Magħmul fiċ-Ċina