BLACK+DECKER BXUP1100XDE Submersible Dirty Water Pump

1. Introduzzjoni

The BLACK+DECKER BXUP1100XDE is a reliable and powerful submersible pump with a stainless steel body, specifically designed for pumping dirty water from various sources such as wells, ponds, tanks, pits, and other containers. This pump is capable of handling dirt and debris up to 35mm in diameter.

It features an integrated float switch for automatic operation, allowing the pump to activate and deactivate based on water levels. The maximum immersion depth for the BXUP1100XDE is 7 meters, and it can pump water up to a height of 10.5 meters.

2. Informazzjoni dwar is-Sigurtà

TWISSIJA: Aqra t-twissijiet u l-istruzzjonijiet kollha tas-sigurtà qabel ma tħaddem dan il-prodott. Jekk ma ssegwix it-twissijiet u l-istruzzjonijiet, dan jista' jirriżulta f'xokk elettriku, nar, u/jew korriment serju.

• Always disconnect the pump from the power supply before performing any maintenance, cleaning, or when the pump is not in use.
• Tiżgura l-provvista tal-enerġija voltage matches the rating plate on the pump.
• Do not operate the pump with a damaged power cord or plug. If damaged, it must be replaced by the manufacturer or a qualified service agent.
• Never lift or carry the pump by its power cable. Use the integrated handle.
• Do not run the pump dry. Ensure it is fully submerged in water during operation to prevent overheating and damage.
• Żomm it-tfal u l-persuni mhux awtorizzati 'l bogħod miż-żona tal-operazzjoni.
• This pump is designed for dirty water. Do not use it for flammable, corrosive, or explosive liquids.
• Ensure the installation site is stable and the pump cannot tip over.

3. Prodott Aktarview

The BXUP1100XDE pump features a robust design for efficient and reliable performance.

• Mutur ta' Prestazzjoni Għolja: Equipped with IPX8 protection against high temperatures, ensuring reliability and a long service life.
• Ċ Durabbliasing: Compact design with a corrosion-resistant stainless steel casing.
• Integrated Float Switch: For automatic start and stop based on water level.
• Konnettur Universali: Compatible with discharge hoses of 25mm (1"), 32mm (1 1/4"), or 38mm (1 1/2").

Image 1: The BLACK+DECKER BXUP1100XDE submersible pump with its float switch, operating in a pond to remove water.

4. Setup

1. Konnessjoni tal-manka: Attach a suitable discharge hose (not included) to the universal connector. The pump supports hose diameters of 25mm (1"), 32mm (1 1/4"), or 38mm (1 1/2"). Secure the hose connection to prevent leaks.
2. Pjazzament: Carefully lower the pump into the water, ensuring it rests on a stable, flat surface at the bottom of the container, well, or pond. The pump must be fully submerged before operation.
3. Float Switch Positioning: Position the float switch so it can move freely and is not obstructed by the pump body or the container walls. The float switch determines the automatic start and stop levels of the pump.
4. Konnessjoni Elettrika: Connect the pump's power plug to a grounded electrical outlet. Ensure the outlet is protected by a residual current device (RCD) for safety.

Image 2: A user carefully lowering the BLACK+DECKER BXUP1100XDE submersible pump into a water feature, demonstrating proper placement.

5. Istruzzjonijiet Operattivi

1. Start-up Inizjali: Once the pump is correctly installed and submerged, and the power is connected, the pump will start automatically when the water level rises sufficiently to activate the float switch.
2. Operazzjoni Awtomatika: The integrated float switch will automatically turn the pump on when the water level reaches a certain height and turn it off when the water level drops to approximately 45mm.
3. Monitoraġġ: Periodically check the pump's operation and the discharge hose to ensure there are no blockages and water is flowing freely.
4. Waqfien manwali: To stop the pump manually, disconnect it from the power supply.

6. Manutenzjoni

• Tindif: After each use, especially when pumping dirty water, rinse the pump thoroughly with clean water to remove any debris or sediment.
• Spezzjoni tal-Impeller: Regularly check the impeller area for any blockages from large debris. Disconnect power before inspecting and carefully remove any obstructions.
• Verifika tas-Swiċċ tal-Float: Ensure the float switch moves freely and is not encrusted with dirt, which could impair its function.
• Spezzjoni tal-Cable: Periodically inspect the power cable for any signs of damage, cuts, or fraying. Do not use the pump if the cable is damaged.
• Ħażna: When not in use for extended periods, clean the pump, allow it to dry completely, and store it in a dry, frost-free location.

7 Issolvi l-problemi

8. Speċifikazzjonijiet

Image 3: Dimensional diagram of the BLACK+DECKER BXUP1100XDE submersible pump, showing its height, width, and depth.

9. Garanzija u Appoġġ

For warranty information and customer support, please refer to the documentation provided with your purchase or contact the manufacturer, Annovi Reverberi S.p.A, directly. Keep your proof of purchase for any warranty claims.