APIELE 16mm Momentary Push Button Switch with 12V LED Ring Indicator User Manual

1. Prodott Aktarview

The APIELE 16mm Momentary Push Button Switch is designed for various electrical applications. This switch features a 12V LED ring indicator and a durable metal construction. It operates as a momentary switch, meaning it activates only while pressed and deactivates upon release. The switch is rated for 5A/250VAC and includes 1 Normally Open (NO) and 1 Normally Closed (NC) contact configuration, offering versatility for different circuit controls.

Il-karatteristiċi ewlenin jinkludu:

• Momentary operation: Push to activate, release to deactivate.
• Integrated 12V LED ring indicator.
• Durable metal construction with IP67 waterproof and IK10 protection.
• Contact configuration: 1 Normally Open (NO) and 1 Normally Closed (NC).
• Electrical life: 200,000 cycles; Mechanical life: 1,000,000 cycles.

Figure 1: APIELE 16mm Momentary Push Button Switch (Example: Black Shell-Blue LED)

2. Setup u Installazzjoni

2.1 Immuntar

The switch requires a 16mm (0.63 inch) mounting hole. The recommended panel thickness for installation is between 1mm and 10mm. Secure the switch with a nut torque of 5-14Nm.

Figure 2: Mounting dimensions and specifications for the 16mm push button switch.

2.2 Istruzzjonijiet tal-Wiring

The switch comes with a pigtail socket for easy wiring. The LED operates on 12V DC. The switch contacts are 1 Normally Open (NO) and 1 Normally Closed (NC).

Refer to the wiring diagram below for connection details. The pigtail wires are color-coded as follows:

• Wajer Isfar: Normal Closed Pin (NC)
• Wajer Blu: Normal Open Pin (NO)
• Wajer Aħdar: Common Pin (C)
• Wajer Aħmar: Positive LED Pin (+)
• Wajer Iswed: Negative LED Pin (-)

Example Wiring for Normally Open (NO) Switch with Always-On LED:

• Qabbad il- Wajer Aħdar (Common) to the power source positive (+).
• Qabbad il- Wajer Blu (Normal Open) to the positive (+) input of your device.
• Qabbad il- Wajer Aħmar (LED +) to a 12V switched power source.
• Qabbad il- Wajer Iswed (LED -) to ground (-).
• Il- Wajer Isfar (Normal Closed) is not used in this configuration.

This configuration allows the LED to be continuously lit when power is supplied to the red wire, and the switch will complete the circuit to your device when pressed.

Figure 3: Detailed wiring diagram for the APIELE 16mm push button switch, showing color codes for Normal Closed, Normal Open, Common, Positive LED, and Negative LED pins.

3. Istruzzjonijiet Operattivi

This is a momentary push button switch. To operate, press and hold the button to activate the connected circuit. Release the button to deactivate the circuit. The integrated LED ring will illuminate according to its wiring configuration (e.g., always on, or only when the switch is pressed).

Figure 4: The switch is designed for high durability, with a mechanical life of 1,000,000 cycles and an electrical life of 200,000 cycles.

4. Manutenzjoni

The APIELE 16mm push button switch is designed for durability and minimal maintenance. It features an IP67 protection level, making it resistant to dust and water splashes. While it is splash-resistant, it is not designed to be submerged underwater.

• Tindif: Use a soft, dry cloth to clean the switch surface. Avoid abrasive cleaners or solvents.
• Kundizzjonijiet Ambjentali: The switch is suitable for operation in temperatures ranging from -20℃ to +55℃.
• Protezzjoni: The IP67 rating ensures protection against dust ingress and temporary immersion in water (up to 1 meter for 30 minutes). However, prolonged submersion is not recommended.

Figure 5: The switch features IP67 protection, indicating high resistance to dust and water splashes.

5 Issolvi l-problemi

If you encounter issues with your APIELE 16mm Momentary Push Button Switch, consider the following troubleshooting steps:

• Is-Swiċċ Mhux Qed Jattiva:
  • Verify all wiring connections are secure and correctly matched to the diagram (Figure 3).
  • Kun żgur li s-sors tal-enerġija qed jipprovdi l-volum korretttage (e.g., 12V for the LED).
  • Check for any loose connections at the pigtail socket or the device it controls.
• LED ma jdawwalx:
  • Confirm the Red (+) and Black (-) LED wires are connected to a 12V power source and ground, respectively.
  • Check for proper polarity.
  • Ensure the 12V power source for the LED is active.
• Operazzjoni intermittenti:
  • Inspect all wires for damage or fraying.
  • Ensure the switch is securely mounted and the nut torque is within the specified range (5-14Nm).
  • Avoid exceeding the switch's rated current (5A/250VAC).

If problems persist after following these steps, contact customer support for further assistance.

6. Speċifikazzjonijiet

7. Garanzija u Appoġġ

7.1 Informazzjoni dwar Garanzija

Specific warranty details for this product are not provided in the available information. Please refer to the retailer's return policy or contact APIELE directly for warranty inquiries.

7.2 Appoġġ għall-Klijent

For technical assistance, product inquiries, or support, please visit the official APIELE store or contact their customer service department.

APIELE Store: https://www.amazon.com/stores/APIELE/page/194CDEEB-78B9-40FE-ABD1-C1F44F9C5282