Manwal tal-Utent tal-Kontrollur Ewlieni tal-Kulur Eurolite 70064575 DMX LED

1. Introduzzjoni

Thank you for choosing the Eurolite 70064575 DMX LED Color Chief Controller. This manual provides essential information for the safe and efficient operation of your device. Please read these instructions carefully before use and keep them for future reference. This controller is designed for managing DMX-compatible LED lighting fixtures, offering versatile control over color, effects, and scenes.

2. Istruzzjonijiet tas-Sigurtà

To ensure safe operation, please observe the following safety guidelines:

• Aqra l-istruzzjonijiet kollha qabel tħaddem l-apparat.
• Żomm l-apparat 'il bogħod mill-umdità, ix-xita, u l-likwidi.
• Tesponix l-apparat għal temperaturi estremi jew dawl tax-xemx dirett.
• Żgura ventilazzjoni xierqa biex tevita sħana żejda.
• Only use the provided power adapter or one with identical specifications.
• Tippruvax issewwi jew timmodifika l-apparat int stess. Irreferi għal kull manutenzjoni f'idejn persunal kwalifikat.
• Disconnect the power supply before cleaning or when not in use for extended periods.
• Dan l-apparat huwa maħsub għall-użu fuq ġewwa biss.

3. Kontenut tal-Pakkett

Jekk jogħġbok iċċekkja li l-oġġetti kollha huma preżenti u f'kundizzjoni tajba meta tiftaħ il-pakkett:

• Eurolite 70064575 DMX LED Color Chief Controller
• Adapter tal-Enerġija
• Manwal għall-Utent (dan id-dokument)

4. Prodott Aktarview

Familiarize yourself with the various components and controls of your DMX LED Color Chief Controller.

Figura 4.1: Il-Panel ta' Quddiem Fuqview. This image displays the complete front panel of the Eurolite 70064575 DMX LED Color Chief Controller, showing all buttons, faders, knobs, and the central LCD screen.

Figure 4.2: Detailed Front Panel. A closer look at the front panel, highlighting the fixture selection buttons (1-8), color control knobs (A-D), color wheel fader, effect buttons (FX1-FX8), and the chase/scene selection buttons (1-24).

Figure 4.3: LCD Screen Display. This image provides a close-up of the LCD screen, which displays various parameters such as RGBWAU values, dimmer, shutter, color wheel settings, and music sensitivity.

Figure 4.4: Fixture and Color Controls. A close-up view of the fixture selection buttons (1-8) and the color control section, including the color wheel fader and individual color adjustment knobs.

Figure 4.5: Display and Navigation. This image focuses on the central LCD display and the surrounding navigation buttons (MENU/ESC, DEL, SWAP, ENTER), which are used for menu interaction and parameter adjustments.

Figure 4.6: Speed and Store Controls. A dettaljata view of the Speed knob, used for adjusting chase or effect speeds, and the Store button, essential for saving scenes and chases.

Figura 4.7: Konnessjonijiet tal-Panel ta' Wara. This image shows the rear panel of the controller, featuring the DMX OUT (3-pin XLR), Audio input (XLR), DC 9-12V power input, and the POWER ON/OFF switch.

Kontrolli tal-Panew ta' Quddiem:

• Fixture Buttons (1-8): Select individual or groups of DMX fixtures.
• Color Control Knobs (A, B, C, D): Adjust specific color parameters (e.g., Red, Green, Blue, White).
• Color Wheel Fader: Provides fine control over color mixing or pre-set color wheels.
• Effect Buttons (FX1-FX8): Trigger pre-programmed or custom lighting effects.
• Dimmer Fader: Controls the overall intensity of selected fixtures.
• Shutter Fader: Controls the strobe or shutter speed.
• Skrin LCD: Displays current settings, menu options, and parameter values.
• Navigation Buttons (MENU/ESC, DEL, SWAP, ENTER): Użat għan-navigazzjoni tal-menù u l-aġġustament tal-parametri.
• Chase/Scene Buttons (1-24): Select and activate pre-programmed chases or scenes.
• Master Fader: Global intensity control.
• Fade Time / Chase Speed Faders: Adjust the transition time between scenes or the speed of chases.
• Buttuna tal-Mużika: Activates sound-to-light mode using the built-in microphone.
• Sensitivity Knob: Adjusts the sensitivity of the built-in microphone for music mode.
• Buttuna tal-Aħżen: Saves current settings as a scene or chase.

Konnessjonijiet tal-Panew ta' wara:

• DMX OUT (3-pin XLR): Connects to DMX-compatible lighting fixtures.
• AUDIO Input (XLR): External audio input for music synchronization.
• Dħul tal-Enerġija DC 9-12V: Qabbad l-adapter tal-enerġija inkluż hawn.
• Swiċċ tal-QAWWA ON/OFF: Ixgħel jew jitfi l-unità.

5. Setup

Follow these steps to set up your DMX LED Color Chief Controller:

1. Konnessjoni tal-Enerġija: Connect the provided power adapter to the DC 9-12V input on the rear panel of the controller. Plug the adapter into a suitable power outlet.
2. Konnessjoni DMX: Connect a 3-pin DMX cable from the DMX OUT port on the controller to the DMX IN port of your first DMX lighting fixture. Daisy-chain additional DMX fixtures by connecting the DMX OUT of the first fixture to the DMX IN of the next, and so on. Ensure the last fixture in the chain has a DMX terminator if recommended by the fixture manufacturer.
3. Fixture Addressing: Before operation, ensure all your DMX lighting fixtures are correctly addressed according to their respective manuals. The controller can manage up to 240 DMX channels.
4. Qawwa Mixgħul: Flip the POWER ON/OFF switch on the rear panel to the "ON" position. The LCD screen should illuminate.
5. Input tal-Awdjo (Mhux obbligatorju): If you wish to use external audio for music synchronization, connect an audio source to the AUDIO input on the rear panel.

6. Istruzzjonijiet Operattivi

This section details the basic operation of the Eurolite DMX LED Color Chief Controller.

6.1. Selecting Fixtures

• Agħfas il- Fixture buttons (1-8) on the left side to select the DMX fixture(s) you wish to control. Multiple fixtures can be selected simultaneously.

6.2. Kontroll tal-Kulur

• Uża l- Color Control Knobs (A, B, C, D) to adjust individual color components (e.g., Red, Green, Blue, Amber, White, UV) of the selected fixtures. The specific function of each knob depends on the DMX profile of your connected fixtures.
• Il- Color Wheel Fader allows for smooth transitions through a color spectrum or selection of pre-defined colors if your fixture supports a color wheel.

6.3. Dimmer and Shutter

• Aġġusta l- Dimmer Fader to control the overall brightness of the selected fixtures.
• Uża l- Shutter Fader to control strobe effects or the opening/closing of the fixture's shutter.

6.4. Effects (FX)

• Agħfas il- FX buttons (FX1-FX8) to activate various built-in or user-programmed lighting effects.
• Il- Veloċità FX button may allow adjustment of the effect speed.

6.5. Scenes and Chases

• Creating a Scene:
  1. Set your desired lighting parameters using the knobs and faders.
  2. Agħfas il- Aħżen buttuna.
  3. Agħżel wieħed mill- Chase/Scene buttons (1-24) to save your scene to that location.
• Activating a Scene: Agħfas il-korrispondenti Chase/Scene button (1-24) to recall a saved scene.
• Creating a Chase (Sequence of Scenes):
  1. Enter Chase programming mode (refer to the LCD screen and navigation buttons for specific steps).
  2. Add saved scenes as steps to your chase.
  3. Save the chase.
• Activating a Chase: Select the desired chase using the Chase/Scene buttons.
• Uża l- Ħin Fade u Veloċità tal-Ġiri faders to adjust the transition time between steps and the overall speed of the chase.

6.6. Modalità Mużika

• Agħfas il- Mużika button to activate sound-to-light functionality. The built-in microphone will detect audio.
• Aġġusta l- Pum tas-Sensittività to fine-tune the microphone's response to ambient sound or external audio input.

6.7. LCD Screen and Navigation

• Il- Skrin LCD provides visual feedback on current settings, menu options, and programming steps.
• Uża l- MENU/ESC button to access menus or exit current operations.
• Il- DEL button is used to delete steps or settings.
• Il- SWAP button may be used to exchange values or functions.
• Il- DĦUL button confirms selections or enters sub-menus.

7. Manutenzjoni

Manutenzjoni xierqa tiżgura l-lonġevità u l-prestazzjoni ottimali tal-kontrollur tiegħek.

• Tindif: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the surface of the controller. Do not use abrasive cleaners, solvents, or harsh chemicals.
• Ħażna: When not in use, store the controller in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for extended periods, consider using the original packaging to protect it from dust and physical damage.
• Spezzjoni: Periodically check cables and connections for any signs of wear or damage. Replace damaged cables immediately.

8 Issolvi l-problemi

Jekk tiltaqa' ma' problemi bil-kontrollur tiegħek, irreferi għall-problemi u s-soluzzjonijiet komuni li ġejjin:

If the problem persists after attempting these solutions, please contact Eurolite customer support or your dealer for further assistance.

9. Speċifikazzjonijiet

10. Garanzija u Appoġġ

For information regarding warranty terms, technical support, or service, please refer to the warranty card included with your product or visit the official Eurolite websit. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.