SONICAKE RockStage Multi-Effects Guitar Pedal Instruction Manual

1. Introduzzjoni

Grazzi tax-xiriasing the SONICAKE RockStage Multi-Effects Guitar Pedal. This device is designed to provide essential guitar effects in a compact and user-friendly format, ideal for classic rock musicians. It integrates Distortion, Chorus, Delay, and Reverb effects, along with a built-in cabinet simulator for versatile sound routing.

2. Karatteristiċi ewlenin

One-stop gig solution for classic rock players with all necessary core effects.
Analog Plexi-style distortion for 80s/90s hard rock tones.
Analog BBD-style chorus for warm, dreamy soundscapes.
500ms analog voice delay and high-quality reverb for expansive, spacy tones.
Integrated cabinet simulation for direct connection to PA systems, mixers, or audio interfaces.

3. X'hemm fil-Kaxxa

SONICAKE RockStage Multi-Effects Guitar Pedal (QCE-10)
Cable XLR
Adapter tal-Enerġija (9V DC)
Manwal għall-Utent

4. Istruzzjonijiet ta' Setup

4.1 Konnessjoni tal-Enerġija

Connect the provided 9V DC power adapter to the 'DC 9V' input jack on the pedal. Ensure the power source meets the pedal's requirements (9V DC, 20mA minimum) to prevent damage.

4.2 Konnessjonijiet tal-Awdjo

Input tal-kitarra: Connect your guitar to the 'IN' jack on the right side of the pedal using a standard 1/4-inch instrument cable.
Output għal Amplifier/PA: Connect the 'OUT' jack on the left side of the pedal to your guitar amplifier's input or a PA system/mixer using a standard 1/4-inch instrument cable or the provided XLR cable if using the cabinet simulation.
Ħruġ tal-headphones: For silent practice, connect headphones to the 'PHONES' jack.

SONICAKE RockStage pedal with input and output jacks — Figura 1: Aktarview of the SONICAKE RockStage pedal, showing input, output, and power connections.

SONICAKE RockStage pedal connected to guitar and ampaktar ħaj — Figure 2: The RockStage pedal connected to a guitar and an amplifier, illustrating typical setup.

5. Istruzzjonijiet Operattivi

The RockStage pedal features four main effects: Chorus, Rock Amp (Distortion), Delay, and Reverb. Each effect has dedicated footswitches and control knobs.

5.1 Effect Modules

SONICAKE RockStage pedal showing four effects: Chorus, Rock Amp, Delay, Reverb — Figure 3: The four main effects modules of the RockStage pedal: Chorus, Rock Amp, Delay, and Reverb.

Kor: Controls for SPEED and DEPTH to adjust the modulation intensity and rate.
Blat Amp (Distortion): Controls for VOL (Volume), TONE, and GAIN to shape the distortion character and output level.
Dewmien: Controls for BLEND (mix), REPEAT (feedback), and TIME to set the delay parameters.
Reverb: A single MIX knob to adjust the wet/dry balance of the reverb effect.

5.2 Activating/Deactivating Effects

Each effect module has a dedicated footswitch. Press the footswitch to toggle the corresponding effect on or off. The LED indicator above each footswitch will illuminate when the effect is active.

5.3 Cabinet Simulation

The RockStage pedal includes a built-in cabinet simulator. This feature allows you to connect the pedal directly to a PA system, mixer, or audio interface without needing a traditional guitar amplifier. The 'CABINET SIM' switch (OFF/ON) is located between the Reverb and Delay modules.

SONICAKE RockStage pedal with Cabinet Sim switch highlighted — Figure 4: The Cabinet Sim switch, enabling direct connection to PA systems or audio interfaces.

5.4 LED Knobs

The control knobs for each effect feature LED backlighting, which clearly indicates the working status of the effect, especially useful in low-light stage ambjenti.

SONICAKE RockStage pedal showing illuminated LED knobs — Figure 5: Illuminated LED knobs provide clear visual feedback on effect status.

5.5 Portabbiltà

The compact size and lightweight design of the RockStage pedal make it highly portable and road-ready, fitting easily into gig bags or backpacks.

SONICAKE RockStage pedal fitting into a gig bag — Figure 6: The compact design allows for easy transport and setup.

6. Speċifikazzjonijiet

Karatteristika	Dettall
Brand	SONICAKE
Isem tal-Mudell	BLATTAGE (QCE-10)
Dimensjonijiet	40L x 7l x 5.5H cm
Voltage	9 Volts
Ampetà	20 Milliampere
Effetti tal-Output tal-Awdjo	Overdrive, Distortion, Chorus, Reverb, Delay
Tip ta' Kontroll	Button, Knob
Sors tal-Enerġija	Corded Elettriku
Interface tal-Ħardwer	Multiple Audio
Format tas-Sinjal	Analogu
Tip ta' Konnettur	Jack tal-Awdjo ta '3.5 mm
Pajjiż ta' Oriġini	Iċ-Ċina

7. Manutenzjoni

Tindif: Use a soft, dry cloth to clean the pedal. Avoid using abrasive cleaners or solvents.
Ħażna: Aħżen il-pedala f'post frisk u niexef 'il bogħod mix-xemx diretta u minn temperaturi estremi.
Immaniġġjar: Evita li twaqqa’ l-pedala jew li tissottomettiha għal impatti qawwija.
Qawwa: Always disconnect the power adapter when the pedal is not in use or during electrical storms.

8 Issolvi l-problemi

Ebda Ħsejjes:
- Kun żgur li l-kejbils kollha huma konnessi sew.
- Verify the power adapter is correctly plugged in and providing power.
- Check your guitar and amplifier volume settings.
- Test with different cables to rule out faulty connections.
Ħoss/Ħoss mhux mixtieq:
- Ensure you are using the correct power adapter.
- Ipprova uża żbokk tad-dawl differenti.
- Keep the pedal away from other electronic devices that may cause interference.
Effect Not Activating:
- Press the footswitch firmly. The LED should illuminate.
- Check the knob settings for the specific effect; some effects may be subtle at low settings.

9. Garanzija u Appoġġ

The SONICAKE RockStage Multi-Effects Guitar Pedal comes with a Garanzija tal-prodott ta '1 sena mid-data tax-xiri.

For technical support, troubleshooting assistance, or warranty claims, please contact SONICAKE customer service. Refer to the contact information provided on the product packaging or the official SONICAKE websit.