Introduzzjoni
The FONESTAR BTX-3011 is a compact and lightweight Bluetooth audio transmitter designed to enable wireless audio streaming from your television or other audio sources to Bluetooth headphones or speakers. This manual provides detailed instructions for the safe and efficient use of your device, ensuring optimal performance and longevity.
Informazzjoni dwar is-Sigurtà
- Tesponix l-apparat għall-umdità, xita, jew temperaturi estremi.
- Evita li twaqqa’ jew tissuġġetta l-apparat għal impatti qawwija.
- Tippruvax tiżżarma jew timmodifika l-apparat. Dan jannulla l-garanzija.
- Żomm fejn ma jintlaħaqx mit-tfal.
- Use only the specified power source (5V DC via USB).
Kontenut tal-Pakkett
Jekk jogħġbok iċċekkja li l-oġġetti kollha huma preżenti:
- FONESTAR BTX-3011 Bluetooth Audio Transmitter
- Integrated 3.5mm stereo auxiliary cable (30 cm)
- Kejbil tal-enerġija USB integrat
- Manwal għall-Utent (dan id-dokument)
Prodott Overview
Image showing the compact design of the FONESTAR BTX-3011 Bluetooth Audio Transmitter, featuring its 3.5mm audio jack and USB power connector.
The BTX-3011 features a minimalist design with essential components for easy operation:
- Jack Awdjo 3.5mm: Connects to the audio output of your TV, stereo system, or other audio source.
- USB Power Connector: Connects to a USB port for power supply.
- Dawl Indikatur tal-Istat: Provides visual feedback on the device's operational status (pairing, connected).
Setup
Follow these steps to set up your FONESTAR BTX-3011 transmitter:
- Qabbad mas-Sors Awdjo: Plug the integrated 3.5mm audio jack of the BTX-3011 into the audio output (e.g., headphone jack, AUX out) of your television, computer, or other audio device.
- Qawwa l-Apparat: Plug the integrated USB power connector into a 5V DC USB port. This can be a USB port on your TV, a computer, a USB wall adapter (not included), or a power bank. The status indicator light will illuminate.
- Daħħal il-Mod tat-Tqabbil: The BTX-3011 will automatically enter pairing mode when powered on. The status indicator light will flash rapidly, indicating it is ready to connect to a Bluetooth receiving device.
- Pair with Bluetooth Headphones/Speaker:
- Put your Bluetooth headphones or speaker into pairing mode. Refer to your audio device's manual for specific instructions.
- Place the headphones/speaker close to the BTX-3011.
- The BTX-3011 will automatically search for and connect to the nearest available Bluetooth audio receiver in pairing mode.
- Once connected, the status indicator light on the BTX-3011 will change to a steady illumination or flash slowly, depending on the connection status.
- Awdjo tat-Test: Play audio from your source device. You should now hear the audio through your connected Bluetooth headphones or speaker. Adjust volume on your receiving device as needed.
Operazzjoni
The FONESTAR BTX-3011 operates automatically once paired:
- Konnessjoni mill-ġdid Awtomatika: After initial pairing, the transmitter will attempt to automatically reconnect to the last paired device when both are powered on and within range.
- Indikatur tal-Istat: The LED indicator provides information about the device's state:
- Teptip Rapidu: Pairing mode, searching for a device.
- Dawl stabbli: Successfully connected to a Bluetooth device.
- Firxa: The effective transmission range is approximately 10 meters (33 feet) in an open environment. Obstacles and interference may reduce this range.
Manutenzjoni
To ensure the longevity and proper functioning of your BTX-3011:
- Tindif: Imsaħ l-apparat b'ċarruta ratba u niexfa. Tużax prodotti tat-tindif likwidi jew materjali li joborxu.
- Ħażna: Meta ma tkunx qed tuża l-apparat, aħżenh f'post frisk u niexef, 'il bogħod mix-xemx diretta u minn temperaturi estremi.
- Kura tal-Cable: Avoid bending or twisting the integrated cables excessively to prevent damage.
Issolvi l-problemi
If you encounter issues with your BTX-3011, refer to the following common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Ebda output awdjo. | Device not powered, not paired, or audio source issue. | Ensure USB power is connected. Verify BTX-3011 is paired (steady LED). Check audio source volume and output settings. |
| Cannot pair with headphones/speaker. | Headphones/speaker not in pairing mode, out of range, or already connected to another device. | Ensure your receiving device is in pairing mode. Move devices closer. Disconnect receiving device from other Bluetooth connections. Power cycle both devices. |
| Audio is intermittent or distorted. | Out of range, interference, or low battery on receiving device. | Move devices closer. Reduce obstacles between transmitter and receiver. Check battery level of headphones/speaker. Avoid strong Wi-Fi signals or other Bluetooth devices nearby. |
| L-indikatur LED mhux jixgħel. | Ebda provvista ta 'enerġija. | Ensure the USB power cable is securely connected to a working 5V DC USB port. Try a different USB port or power adapter. |
Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Mudell | BTX-3011 |
| Brand | FONESTAR |
| Teknoloġija tal-Konnettività | Bluetooth, USB |
| Standard Wireless | Bluetooth 3.0 EDR A2DP |
| Distanza tat-Trażmissjoni | Sa 10 metri (33 pied) |
| Input | 1 x 3.5mm Stereo Auxiliary Jack |
| Provvista tal-Enerġija | 5V DC via USB port |
| Dimensjonijiet (H x W x D) | 20 x 10 x 39 mm (madwar) |
| Batterija Rikarikabbli | Not included (device is USB powered) |
| Kontroll mill-bogħod | Mhux inkluż |
Garanzija u Appoġġ
FONESTAR products are designed for reliability and performance. For warranty information and technical support, please refer to the official FONESTAR website or contact your local dealer. Please retain your proof of purchase for any warranty claims.