Introduzzjoni
Grazzi tax-xiriasing the ThermoPro TP65C Wireless Indoor Outdoor Hygrometer Thermometer. This device is designed to provide accurate temperature and humidity readings for both indoor and outdoor environments. With its large touchscreen display and wireless remote sensor, you can easily monitor conditions up to 150 meters away. Please read this manual thoroughly before use to ensure proper operation and to maximize the product's lifespan.
Kontenut tal-Pakkett
- 1 x Main Unit (Receiver)
- 1 x Sensor Remote (Trasmettitur)
- 2 x AAA Batteries for Main Unit
- 2 x AAA Batteries for Remote Sensor
- 1 x Manwal għall-Utent
Image: The main display unit and the remote outdoor sensor, showing their relative sizes and design.
Karatteristiċi Ewlenin
- Large LCD with Touchscreen Backlight: Easy to read in various lighting conditions.
- Wireless Monitoring: Simultaneously displays indoor/outdoor temperature and humidity.
- Expandable System: Supports up to 3 remote outdoor sensors (additional sensors sold separately).
- Max/Min Records: Displays highest and lowest temperature and humidity readings over 24 hours or all-time.
- Trend Indicators: Arrows show temperature and humidity trends (rising, falling, or no change).
- Long Range: Wireless transmission range up to 150 meters (500 feet).
- Unitajiet tat-Temperatura: Tista' tinqaleb bejn Celsius (°C) u Fahrenheit (°F).
- Multiple Placement Options: Magnetic back, hanging hole, and tabletop stand for versatile positioning.
Image: A diagram illustrating the key features of the ThermoPro TP65C, including temperature, humidity, wireless range, touchscreen, backlight, trend arrows, and low battery indicator.
Setup
1. Installazzjoni ta 'batteriji
- Sensor mill-bogħod: Open the battery compartment on the back of the remote sensor. Insert 2 AAA batteries, observing the correct polarity (+/-). Close the compartment.
- Unità Prinċipali: Open the battery compartment on the back of the main unit. Insert 2 AAA batteries, observing the correct polarity (+/-). Close the compartment.
Once batteries are installed, the remote sensor will transmit data to the main unit. The main unit will display indoor temperature/humidity and outdoor temperature/humidity from the remote sensor.
2. Pairing Remote Sensors (Optional, for multiple sensors)
The main unit can connect to up to three remote sensors. If you have additional sensors, follow these steps:
- Ensure all remote sensors have batteries installed.
- On the main unit, press and hold the CH/SYNC button for 3 seconds to enter synchronization mode.
- Agħfas il- TX button on the back of each remote sensor you wish to pair.
- The main unit will display the readings from each paired sensor.
3. Linji Gwida dwar it-Tqegħid
- Unità Prinċipali: Place the main unit indoors in a dry location, away from direct sunlight, heat sources, or vents. It can be placed on a tabletop or mounted on a wall using the integrated hanging hole or magnetic back.
- Sensor mill-bogħod: Place the remote sensor outdoors in a shaded, dry location. Avoid direct exposure to rain or sunlight, which can affect accuracy. For best results, place it under an overhang or in a weather-resistant enclosure. The maximum transmission range is 150 meters (500 feet) in an open area. Walls, metal objects, and electronic devices can reduce the range.
Image: A close-up of the remote sensor, highlighting its compact size and suitable for outdoor placement.
Image: A close-up of the main unit, showing its display and suitable for indoor placement.
Istruzzjonijiet Operattivi
Wiri tal-Unità Prinċipali
The main unit's large LCD displays indoor and outdoor temperature and humidity, along with trend indicators and MAX/MIN records.
Image: The main display unit showing indoor and outdoor temperature and humidity readings, along with various icons and buttons.
Buttuni u Funzjonijiet
- Buttuna ° F / ° C: Press to switch between Fahrenheit and Celsius temperature display.
- Buttuna DAWL: Press to activate the backlight for 15 seconds.
- Buttuna MAX/MIN/CLEAR:
- Press once to display MAX (highest) temperature and humidity records.
- Press again to display MIN (lowest) temperature and humidity records.
- Press and hold for 3 seconds to clear the MAX/MIN records. The records will also clear automatically every 24 hours.
- CH/SYNC Button:
- Press to cycle through remote sensor channels (CH1, CH2, CH3) if multiple sensors are connected.
- Press and hold for 3 seconds to re-synchronize with remote sensors.
Temperature and Humidity Trend Indicators
The arrows next to the temperature and humidity readings indicate the trend:
- ↑ (Up Arrow): It-temperatura/l-umdità qed tiżdied.
- → (Right Arrow): Temperature/humidity is stable.
- ↓ (Down Arrow): Temperature/humidity is falling.
Image: A close-up of the display showing the trend arrows for temperature and humidity.
Manutenzjoni
- Naddaf l-unità b’soft artab, damp drapp. Tgħaddasx fl-ilma.
- Evita li tuża tindif jew solventi li joborxu.
- Remove batteries if storing the unit for an extended period.
- Ensure the remote sensor is protected from direct weather elements to prolong its lifespan.
Issolvi l-problemi
No Remote Sensor Data
- Check if batteries are correctly installed in the remote sensor and main unit.
- Ensure the remote sensor is within the 150-meter transmission range.
- Relocate the main unit and/or remote sensor to reduce interference from other electronic devices or large metal objects.
- Re-synchronize the remote sensor: Press and hold the CH/SYNC button on the main unit for 3 seconds, then press the TX button on the back of the remote sensor.
Qari mhux eżatt
- Ensure the remote sensor is not in direct sunlight or exposed to rain.
- Place both units side-by-side for 30 minutes to compare readings. If they differ significantly, contact customer support.
- Avoid placing the units near heat sources, vents, or areas with extreme temperature fluctuations.
Display is Dim or Blank
- Replace the batteries in the main unit.
Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Medda ta 'Temperatura ta' ġewwa | -20°C sa 70°C (-4°F sa 158°F) |
| Firxa ta 'Temperatura ta' Barra | -50°C sa 70°C (-58°F sa 158°F) |
| Medda ta 'Umdità | 10% sa 99% RH |
| Preċiżjoni tat-Temperatura | ±1.1°C (±2.0°F) |
| Eżattezza Umdità | ±2% between 30% and 80%, ±3% below 30% and above 80% |
| Firxa tat-Trażmissjoni | Sa 150 metru (500 pied) fl-arja aperta |
| Frekwenza | 868 MHz |
| Sors tal-Enerġija (Unità Prinċipali) | 2 x batteriji AAA 1.5V |
| Sors tal-Enerġija (Sensor Remot) | 2 x batteriji AAA 1.5V |
| Dimensjonijiet tal-Prodott (Unità Prinċipali) | 8.5 x 8.5 x 2.5 ċm (3.3 x 3.3 x 1 pulzieri) |
| Dimensjonijiet tal-Prodott (Sensor Remot) | 7.4 x 6.3 x 2.5 ċm (2.9 x 2.5 x 1 pulzieri) |
Image: A visual representation of the main unit and remote sensor with their dimensions indicated.
Garanzija u Appoġġ
ThermoPro provides a 1-year warranty for this product from the date of purchase. If you register your product on the ThermoPro website, the warranty will be extended to 3 years. This warranty covers defects in materials and workmanship. It does not cover damage caused by misuse, accident, or unauthorized modifications.
For warranty claims, technical support, or any questions regarding your ThermoPro TP65C, please contact ThermoPro Customer Service:
- Websit: www.thermopro.com
- Email: service@thermopro.com
Please have your model number (TP-65C) and purchase date ready when contacting support.
