Ariete 2718 Xclean Robot Vacuum Cleaner User Manual

Introduzzjoni

Thank you for choosing the Ariete 2718 Xclean Robot Vacuum Cleaner. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new robot vacuum. Please read this manual thoroughly before using the appliance and keep it for future reference.

Istruzzjonijiet Importanti dwar is-Sigurtà

To reduce the risk of fire, electric shock, or injury, always follow basic safety precautions when using your robot vacuum cleaner:

• Aqra l-istruzzjonijiet kollha qabel tuża l-apparat.
• Dan l-apparat mhuwiex maħsub għall-użu minn persuni (inklużi tfal) b’kapaċitajiet fiżiċi, sensorji jew mentali mnaqqsa, jew nuqqas ta’ esperjenza u għarfien, sakemm ma jkunux ingħataw superviżjoni jew istruzzjoni dwar l-użu tal-apparat minn persuna responsabbli għas-sigurtà tagħhom.
• It-tfal għandhom ikunu sorveljati biex jiżguraw li ma jilagħbux bl-apparat.
• Do not operate the vacuum cleaner in areas with flammable or combustible liquids, such as gasoline, or in areas where they may be present.
• Tiġborx xi ħaġa li tkun qed taħraq jew tpejjep, bħal sigaretti, lofarini, jew irmied jaħraq.
• Żomm ix-xagħar, il-ħwejjeġ maħlula, is-swaba’, u l-partijiet kollha tal-ġisem 'il bogħod mill-fetħiet u l-partijiet li jiċċaqilqu.
• Uża biss kif deskritt f'dan il-manwal. Uża biss l-annessi rakkomandati mill-manifattur.
• Tużax b'korda jew plagg bil-ħsara. Jekk l-apparat mhux qed jaħdem kif suppost, ikun waqa’, saritlu ħsara, jitħalla barra, jew waqa’ fl-ilma, erġa’ lura f’ċentru ta’ servizz.
• The robot is equipped with anti-fall sensors to prevent it from falling down stairs. However, always ensure the area around stairs is clear and well-lit for optimal sensor performance.

Kontenut tal-Pakkett

Carefully unpack your robot vacuum cleaner and check that all items are present and in good condition. If any items are missing or damaged, please contact customer support.

• Ariete 2718 Xclean Robot Vacuum Cleaner
• Bażi tal-Iċċarġjar
• Adapter tal-Enerġija
• Kontroll mill-bogħod
• Xkupilji tal-ġenb (2 pari)
• Filtru HEPA (installat minn qabel)
• Primary Filter (pre-installed)
• Trab tat-trab
• Pinzell tat-tindif

Image: All included accessories for the Ariete 2718 Xclean Robot Vacuum Cleaner, including the dustbin, side brushes, HEPA and primary filters, remote control, and a small cleaning brush.

Prodott Overview

Iffamiljarizza ruħek mal-komponenti ewlenin tal-vacuum cleaner robot tiegħek.

Robot Vacuum

• Main Body: Houses the motor, dustbin, and control electronics.
• Side Brushes: Sweep debris into the vacuum's path.
• Roti tas-Sewqan: Jippermettu lir-robot jiċċaqlaq fuq diversi uċuħ.
• Universal Wheel: Provides directional movement.
• Dustbin: Collects dirt and debris.
• Control Panel/LCD Display: Shows status and allows manual operation.
• Charging Contacts: Connects with the charging base for power.
• Anti-Drop Sensors: Detects edges and stairs.
• Anti-Collision Sensors: Detects obstacles to prevent bumping.

Bażi tal-Iċċarġjar

• Charging Contacts: Connect with the robot's charging contacts.
• Power Indicator: Shows charging status.
• Power Port: Connects to the power adapter.

Setup

1. Installazzjoni ta' Xkupilji tal-Ġenb

Align the side brushes with the corresponding posts on the bottom of the robot and press firmly until they click into place.

2. Pożizzjonament tal-Bażi tal-Iċċarġjar

Place the charging base against a wall in an open, uncluttered area. Ensure there is at least 1 meter (3 feet) of clear space on both sides and 2 meters (6 feet) in front of the charging base. Plug the power adapter into the charging base and then into a wall outlet.

3. Iċċarġjar Inizjali

Place the robot vacuum onto the charging base, ensuring the charging contacts on the robot align with those on the base. The robot will begin charging automatically. For first-time use, charge the robot for approximately 5 hours until fully charged. A full charge provides up to 1.5 hours (90 minutes) of cleaning time.

Image: The Ariete 2718 Xclean Robot Vacuum Cleaner docked on its charging base, which is connected to a power outlet, indicating the charging process.

4. Tħejjija taż-Żona tat-Tindif

Before starting a cleaning cycle, remove any obstacles such as power cords, small rugs, toys, or other items that could entangle the robot or obstruct its path. The robot can navigate over low-pile carpets and hard floors.

It-tħaddim tar-Robot

Tixgħel/Jitfi

To power on the robot, press the main power switch located on the side of the unit. The LCD display will illuminate. To power off, press the switch again.

Tibda Ċiklu ta' Tindif

Press the 'CLEAN' button on the robot's control panel or the remote control to start an automatic cleaning cycle. The robot will begin cleaning and select the most appropriate mode for the area.

Image: A user's hand pressing the 'CLEAN' button on the top panel of the Ariete 2718 Xclean Robot Vacuum Cleaner to initiate a cleaning cycle.

Modi tat-Tindif

The Ariete 2718 Xclean offers 6 cleaning modes, selectable via the remote control or the robot's control panel:

• Modalità Awtomatika: The robot cleans randomly, adjusting its path based on obstacles and room layout.
• Corners Mode: The robot focuses on cleaning along walls and in corners.
• Modalità ta' Programmazzjoni: Allows you to set a delayed start time for cleaning.
• Modalità Tul il-Ħajt: The robot follows walls to ensure edge-to-edge cleaning.
• Modalità Spotlight: The robot cleans a concentrated area in a spiral pattern, ideal for heavily soiled spots.

Image: The Ariete 2718 Xclean Robot Vacuum Cleaner actively cleaning a tiled floor in a living space, demonstrating its ability to navigate around furniture.

Bl-użu tal-Kontroll mill-bogħod

The remote control allows you to manually direct the robot, select cleaning modes, and initiate or pause cleaning cycles from a distance. Refer to the remote control diagram for button functions.

Delayed Start / Programming

To program a delayed start, use the 'PLAN' button on the robot or the remote control. You can set the robot to start cleaning after a specified number of hours. The robot does not have a real-time clock for daily scheduling, but rather a timer for delayed activation.

Automatic Return to Charging Base

When the battery level is low, the robot will automatically return to its charging base to recharge. Ensure the charging base is accessible and unobstructed.

Manutenzjoni

Manutenzjoni regolari tiżgura prestazzjoni ottimali u testendi l-ħajja tal-vacuum cleaner robot tiegħek.

1. Tbattil tal-landa taż-żibel

The dustbin has a capacity of 300 ml and should be emptied after each cleaning cycle or when full. To empty:

1. Agħfas il-buttuna tal-ftuħ tal-kontenitur tat-trab u iġbed il-kontenitur tat-trab 'il barra.
2. Iftaħ l-għatu tal-kontenitur tat-trab u armi l-fdalijiet miġbura.
3. Agħlaq l-għatu u erġa’ daħħal il-kontenitur tat-trab fir-robot sakemm tikklikkja f’postu.

Image: A hand demonstrating the removal of the dustbin from the Ariete 2718 Xclean Robot Vacuum Cleaner for emptying or cleaning.

2. Tindif tal-Filtri

The robot uses a primary filter and a HEPA filter. These should be cleaned regularly to maintain suction power.

• Neħħi l-dustbin.
• Take out the primary filter and HEPA filter.
• Tap the filters gently to remove dust. Do not wash the HEPA filter with water. The primary filter can be rinsed with water if heavily soiled, but ensure it is completely dry before reinstallation.
• Erġa’ arma l-filtri u l-kontenitur tat-trab.

3. Tindif ta 'Xkupilji tal-Ġenb

Periodically check the side brushes for tangled hair or debris. Remove any obstructions by hand or using the provided cleaning brush. If brushes are worn, replace them with new ones.

4. Sensuri tat-Tindif

Wipe the anti-drop sensors (located on the bottom of the robot) and anti-collision sensors (located on the front bumper) with a clean, dry cloth to ensure they function correctly.

Image: The Ariete 2718 Xclean Robot Vacuum Cleaner approaching a staircase, illustrating the function of its anti-fall sensors to prevent accidental drops.

5. Kura tal-batterija

To prolong battery life, ensure the robot is regularly charged. If storing the robot for an extended period, fully charge it and then power it off. Recharge every 3 months to prevent deep discharge.

Issolvi l-problemi

Jekk tiltaqa' ma' problemi bir-robot vacuum cleaner tiegħek, irreferi għall-problemi u s-soluzzjonijiet komuni li ġejjin:

Speċifikazzjonijiet

Garanzija u Appoġġ

For warranty information or technical support, please refer to the warranty card included with your product or visit the official Ariete website. Do not attempt to repair the appliance yourself, as this may void the warranty.