Atomos Ninja Flame 7-inch 4K HDMI Recording Monitor User Manual

1. Introduzzjoni

The Atomos Ninja Flame is a 7-inch 4K HDMI recording monitor designed to enhance video production workflows. It combines 4K recording capabilities with a 10-bit FRC panel, supporting native display of HDR footage. This device is optimized for use with DSLR and mirrorless cameras that output Log over HDMI, allowing for detailed monitoring and recording with accurate color representation.

2. Karatteristiċi ewlenin

• 7-inch 1920x1200 Display: High-resolution touchscreen with 325 PPI for clear monitoring.
• 4K Recording: Supports 4K UHD (24/25/30p) recording via HDMI 1.4b input.
• HDR Monitoring: 10-bit FRC Panel for native HDR display and Log gamma support.
• Professional Codecs: Records in ProRes HQ, 422, LT, AVID DNxHR, HQX, HQ, SQ, LB.
• Midja tar-Reġistrazzjoni: Utilizes 2.5" SSD (SATA III) for reliable storage.
• Kostruzzjoni robusta: ABS Polycarbonate with built-in armor protection.
• Konnettività: HDMI input/output, 3.5mm Mic/Line input, 3.5mm Headphone output, LANC.

3. Gwida ta' Setup

3.1 Żpakkjar u Spezzjoni Inizjali

Neħħi bir-reqqa l-komponenti kollha mill-imballaġġ. Ivverifika li l-oġġetti li ġejjin huma preżenti:

• Atomos Ninja Flame Unit
• Master Caddy II
• 12V 3A AC Power Supply
• Travel Case (if included in your specific package)

Inspect the unit for any visible damage. If any components are missing or damaged, contact your retailer or Atomos support immediately.

3.2 It-Tħaddim tal-Apparat

The Ninja Flame can be powered using the included 12V 3A AC Power Supply or NP-F-Series batteries (not included). For extended use, AC power is recommended.

1. Qawwa AC: Connect the 12V 3A AC Power Supply to the DC IN port on the unit and then to a power outlet.
2. Qawwa tal-batterija: Attach compatible NP-F-Series batteries to the battery slots on the rear of the unit. Ensure they are securely latched.

Immaġni: Wara view of the Atomos Ninja Flame, highlighting the battery plate and DC IN port for power connection.

3.3 Installing Recording Media

The Ninja Flame records to 2.5" SSD (SATA III) drives. A Master Caddy II is provided for mounting the SSD.

1. Insert a compatible 2.5" SSD into the Master Caddy II.
2. Slide the loaded Master Caddy II into the drive slot on the side of the Ninja Flame until it clicks into place.

3.4 Konnessjoni ta' Sorsi tal-Vidjo u tal-Awdjo

Use HDMI cables to connect your camera and external monitoring devices.

• Input HDMI: Connect an HDMI cable from your camera's HDMI output to the HDMI 1.4b (Type-A) Input port on the Ninja Flame.
• Ħruġ HDMI: For external monitoring, connect an HDMI cable from the HDMI 1.4b (Type-A) Output port to a monitor or projector.
• Input Awdjo: Connect an external microphone or line-level audio source to the 3.5mm Mic/Line Input.
• Ħruġ tal-headphones: Connect headphones to the 3.5mm Headphone Output for audio monitoring.

Immaġni: Ġenb view of the Atomos Ninja Flame, illustrating the HDMI Input, HDMI Output, and Remote ports.

Immaġni: Naħa oħra view of the Atomos Ninja Flame, showing the power button, Audio I/O (Mic/Line Input), and headphone jack.

4. Istruzzjonijiet Operattivi

4.1 Tixgħel/Jitfi

Press and hold the power button located on the side of the unit to turn the Ninja Flame on or off. The touchscreen will illuminate upon startup.

4.2 Navigazzjoni tal-Interfaċċja tat-Touchscreen

The Ninja Flame features a touch-sensitive display for all controls. Tap icons to access menus, adjust settings, and initiate recording. Swipe gestures may be used for certain functions.

4.3 Reġistrazzjoni tal-Vidjo

1. Ensure your camera is connected via HDMI and outputting a supported video signal.
2. Verify that a formatted SSD is inserted into the unit.
3. On the touchscreen, select your desired recording codec (ProRes, DNxHR) and resolution/frame rate settings.
4. Agħfas il- Rekord button (typically a red circle icon) on the touchscreen to begin recording.
5. Agħfas il- Waqqaf button (typically a square icon) to end recording.

Nota: The Ninja Flame supports various frame rates including 4K UHD (24/25/30p), 1080i (50/60i), and 1080p (24/25/30/50/60/100/120p).

4.4 Karatteristiċi ta' Monitoraġġ

The Ninja Flame offers advanced monitoring tools:

• HDR Monitoring: Activate HDR mode for accurate display of Log footage.
• Waveform, Vectorscope, False Color: Utilize these tools for precise exposure and color analysis.
• Focus Peaking: Assists in achieving critical focus.

5. Manutenzjoni

5.1 Tindif tal-Unità

To clean the display and body, use a soft, lint-free cloth. For stubborn marks, slightly dampNaddaf id-drapp bl-ilma jew b'tindif tal-iskrin ħafif u mhux abrażiv. Evita kimiċi ħarxa jew materjali abrażivi.

5.2 Aġġornamenti tal-Firmware

Periodically check the Atomos website for firmware updates. Updates can improve performance, add features, and resolve known issues. Follow the instructions provided by Atomos for safe firmware installation.

5.3 Ħażna

When not in use, store the Ninja Flame in its protective travel case in a cool, dry environment, away from direct sunlight and extreme temperatures.

6 Issolvi l-problemi

• Ebda Qawwa: Ensure the AC adapter is securely connected or that batteries are charged and properly inserted.
• Ebda Sinjal tal-Vidjo: Verify that the HDMI cable is correctly connected to both the camera and the Ninja Flame's input. Check camera output settings to ensure a compatible signal is being sent.
• Kwistjonijiet ta' Reġistrazzjoni: Confirm that a formatted 2.5" SSD is installed and has sufficient free space. Check recording settings (codec, resolution, frame rate) for compatibility.
• Audio Problems (especially with Nikon cameras): Some users have reported intermittent audio issues when recording from Nikon cameras. Ensure firmware is up to date. If issues persist, contact Atomos support.
• Fixed Red Pixel on Display: A fixed red pixel may indicate a manufacturing defect. If this significantly impacts usability, contact Atomos support for assistance.
• Input Lag on Output Monitor: Some users have noted input lag on the HDMI output. This may be inherent to the device's processing.

7. Speċifikazzjonijiet Tekniċi

8. Informazzjoni dwar Garanzija

The Atomos Ninja Flame typically comes with a Limited 1-Year Warranty. This warranty can often be extended to 3 Years with online registration on the official Atomos website. Please refer to the warranty card included with your product or visit the Atomos support webis-sit għall-aktar termini u kundizzjonijiet tal-garanzija attwali u dettaljati.

Nota: Warranty validity may depend on purchasing from an authorized reseller. Purchases from unauthorized resellers might void extended warranty options.

9. Appoġġ

For technical assistance, product registration, or to download the latest firmware and user guides, please visit the official Atomos support websit. Tipikament tista' ssib FAQs, gwidi għas-soluzzjoni tal-problemi, u informazzjoni ta' kuntatt għas-servizz tal-konsumatur hemmhekk.

When contacting support, please have your product model number (ATOMNJAFL2) and serial number ready.