YATOUR BTA-TOY2 Bluetooth Car Adapter Instruction Manual

Introduzzjoni

This instruction manual provides comprehensive guidance for the installation, operation, and maintenance of your YATOUR BTA-TOY2 Bluetooth Car Adapter. This device integrates Bluetooth audio streaming, auxiliary input, and USB charging capabilities into your vehicle's factory stereo system, utilizing the original CD changer port. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

Image 1: YATOUR BTA-TOY2 Bluetooth Car Adapter, showing the main unit, connection cables, and external microphone.

Informazzjoni dwar is-Sigurtà

To prevent damage to the device or your vehicle, and to ensure safe operation, observe the following safety guidelines:

• Kun żgur li l-ignition tal-vettura tkun mitfija u l-batterija tkun skonnettjata qabel tibda l-installazzjoni.
• Properly connect the adapter to the CD changer port. Incorrect connections can lead to malfunction or damage.
• Use only the appropriate cables for your vehicle model to avoid electrical issues.
• Route cables securely to prevent interference with vehicle controls or moving parts.
• Tippruvax tiżżarma jew timmodifika l-adapter. Dan jannulla l-garanzija u jista' jikkawża ħsara.
• Consult a professional installer if you are unsure about any step of the installation process.

Kontenut tal-Pakkett

Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett:

• YATOUR BTA-TOY2 Bluetooth Car Adapter Unit
• Vehicle-specific 6+6PIN CDC Connector Cable
• 3.5mm AUX Input Cable
• Mikrofonu Estern
• Manwal għall-Utent (dan id-dokument)

Kompatibilità

The YATOUR BTA-TOY2 adapter is designed for specific Toyota and Lexus vehicles equipped with 6+6PIN CDC (CD Changer) ports. Please confirm your vehicle and radio model are listed below before installation.

Mudelli Lexus Kompatibbli:

• ES300/330/350 (2004-2011)
• GS300/400/430/450h (2006-2011)
• GX470 (2004-2009)
• IS200/250/300/350 (2006-2011)
• LS460 (2007-2011)
• LX470 (2004-2007)
• LX570 (2008-2011)
• SC430 (2005-2010)

Compatible Toyota Models:

• 4Runner (2003-2011)
• Avalon (2005-2011)
• Avensis (2003-2011)
• Auris (2007+)
• Camry (2005-2011)
• Celica (2003-2005)
• Corolla/Verso (2005-2011)
• FJ Cruiser (2007-2011)
• Fortuner (2004-2011)
• Hiace (2003-2011)
• Highlander (2004-2011)
• Hilux (2003-2011)
• Land Cruiser (2003-2011)
• Mark X (2005-2011)
• Matrix (2005-2011)
• MR2 (2004-2010)
• Picnic (2003-2010)
• Prius (2004-2011)
• RAV4 (2003-2012)
• Reiz (2003-2010)
• Sequoia (2005-2011)
• Sienna/Previa (2004-2010)
• Solara (2004-2008)
• Tacoma (2005-2011)
• Tundra (2004-2011)
• Venza (2009-2011)
• Vios (2003-2011)
• Vitz (2006-2010)
• Yaris (2006-2011)

Compatible OEM Radios (by Panasonic and Matsushita):

11816, 11817, 11828, 16852, 12821, 13803, 13829, 16852, 17006, 17828, 50323, 51825, 53816, 53818, 58814, 58816, 58827, P1500, P1714 (supports one folder only, on Lexus RX300), P1733, P1740, P1750 (LX470), P1754, P3745 (Land Cruiser), P3803, P3914 (Prado), P3916, P3918, P3919, P3926, P3930, P3946, P6827, P7514, P7809, P7820, Q58816, A56828, A56829, AP6829, AP6860, W13830, W53822, W53900, W53901, W53903, W53905, W58810, W58814, W58831, B9002 Navigation System, ND3T-W55 (36052) Navigation radio (Mark X, not need y cable), etc.

Noti Importanti:

• If the CD changer port is already in use by an existing CD changer, an additional MP3/CDC Switch Cable may be required to combine the YATOUR adapter with the CD changer.
• A Splitter/Y cable is necessary if the CD changer port is occupied by a navigation system.

Setup u Installazzjoni

Installation typically involves connecting the adapter to the vehicle's factory stereo CD changer port. Professional installation is recommended if you are unfamiliar with car audio system wiring.

1. Ipprepara l-Vettura: Turn off the vehicle's ignition and disconnect the negative terminal of the car battery to prevent electrical shorts.
2. Access the Stereo: Carefully remove the car stereo unit from the dashboard to access the rear ports. Refer to your vehicle's service manual for specific instructions on stereo removal.
3. Sib il-Port tas-CD Changer: Identify the 6+6PIN CD changer port on the back of your factory stereo. This is where the YATOUR adapter will connect.
   

   Immaġni 2: Eż.ample of a 6+6PIN CDC connector, which plugs into the car stereo.

4. Qabbad l-Adapter: Plug the vehicle-specific 6+6PIN CDC connector cable from the YATOUR adapter into the corresponding port on the car stereo. Ensure a secure connection.
   

   Image 3: The main connection cable, showing the adapter-side connector and the vehicle-side 6+6PIN connector.
5. Qabbad il-Mikrofonu (Mhux obbligatorju): If using the hands-free calling feature, connect the external microphone to the designated port on the YATOUR adapter. Route the microphone cable to a suitable location, such as near the rearview mirror or on the A-pillar, for optimal voice pickup.
6. Route Cables and Secure Adapter: Carefully route all cables to avoid pinching or interference. Secure the YATOUR adapter unit in a safe, dry location behind the dashboard or in the glove compartment, away from heat and moisture.
7. Reassemble Stereo: Reinstall the car stereo unit into the dashboard.
8. Erġa' qabbad il-batterija: Erġa' qabbad it-terminal negattiv tal-batterija tal-karozza.
9. Funzjonalità tat-Test: Turn on the vehicle and stereo to test the adapter's functions.

Istruzzjonijiet Operattivi

Activating the Adapter:

After installation, turn on your car stereo. Select the CD changer mode (often labeled "CD," "CDC," or "AUX") on your car stereo. The YATOUR adapter will now be active.

Tqabbil Bluetooth:

1. Ensure the YATOUR adapter is active (CD changer mode selected).
2. Fuq it-tagħmir mobbli tiegħek, ippermetti l-Bluetooth u fittex tagħmir disponibbli.
3. Select "YATOUR" or a similar identifier from the list of devices.
4. Once paired, your device will connect automatically when the adapter is active.

Streaming tal-Awdjo bil-Bluetooth:

• Play audio from your paired mobile device. Sound will be routed through your car's speakers.
• Control playback (play/pause, next/previous track) using your car stereo buttons or steering wheel controls (if supported by your vehicle and stereo).

Input AUX:

• Connect any external audio source (e.g., MP3 player, portable CD player) to the 3.5mm AUX input port on the YATOUR adapter using the provided AUX cable.
• The adapter will automatically switch to AUX mode when a device is connected to the AUX port.

Iċċarġjar USB:

• The adapter features a 5V/1A USB port for charging mobile devices.
• Nota: This USB port is for charging only and does not support music playback from USB storage devices.

Manutenzjoni

The YATOUR BTA-TOY2 adapter requires minimal maintenance. Follow these guidelines to ensure longevity:

• Keep the adapter unit and connections dry and free from dust.
• Evita li tesponi l-unità għal temperaturi estremi jew dawl tax-xemx dirett għal perjodi twal.
• Do not use harsh chemicals or abrasive cleaners on the unit. A soft, dry cloth is sufficient for cleaning.
• Ensure all cables are securely connected and not under tension.

Issolvi l-problemi

Speċifikazzjonijiet

Garanzija u Appoġġ

YATOUR products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact information provided at the point of purchase or visit the official YATOUR websit. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri għal talbiet ta' garanzija.