BONTEC Single Arm Monitor Mount User Manual

1. Introduzzjoni

Thank you for choosing the BONTEC Single Arm Monitor Mount. This product is designed to enhance your workspace by providing a stable, adjustable, and ergonomic solution for your monitor. It helps free up valuable desk space and allows for flexible screen positioning to reduce neck and back strain.

2. Informazzjoni dwar is-Sigurtà

Aqra l-istruzzjonijiet kollha bir-reqqa qabel l-assemblaġġ u l-użu.
Ensure your monitor's weight and VESA pattern are within the specified limits (max 10 kg, VESA 75x75mm or 100x100mm).
Tissikkax iżżejjed il-viti, għax dan jista' jikkawża ħsara.
Żomm partijiet żgħar 'il bogħod mit-tfal.
Jekk xi partijiet huma nieqsa jew bil-ħsara, ikkuntattja lill-appoġġ tal-klijent immedjatament.

3. Kontenut tal-Pakkett

Jekk jogħġbok ivverifika li l-komponenti kollha huma preżenti qabel tibda l-assemblaġġ:

Assemblea tad-Driegħ tal-Monitor
Desk Clamp Komponent
Komponent tal-Bażi tal-Grommet
Ħardwer tal-Immuntar (viti, woxers, spacers)
Allen Keys (Hex Wrenches)
Klipps għall-Immaniġġjar tal-Kejbils
Manwal ta' Istruzzjoni

4. Setup u Installazzjoni

The BONTEC monitor mount offers two primary installation methods: Desk Clamp and Grommet Base. Choose the method that best suits your desk setup.

4.1. Desk Clamp Installazzjoni

This method is suitable for desk thicknesses between 10mm and 85mm.

Waħħal is-C-clamp to the edge of your desk. Ensure the clamp is securely tightened to provide maximum stability.
Daħħal l-arblu prinċipali fil-clamp il-bażi u waħħalha bil-kamin provdut.
Slide the monitor arm onto the pole at your desired height and tighten the adjustment screw.

4.2. Grommet Base Installation

This method is suitable for desks with a pre-existing bolt hole (diameter 10mm to 85mm) and desk thicknesses between 10mm and 80mm.

Żarma s-C-clamp to use the grommet base components.
Insert the grommet bolt through the desk hole.
Secure the grommet base from underneath the desk using the provided washer and nut.
Daħħal l-arblu prinċipali fil-bażi tal-grommet u waħħalha.
Slide the monitor arm onto the pole at your desired height and tighten the adjustment screw.

Two installation methods: Desk Clamp u l-Bażi tal-Grommet — Figure 1: Illustration of the two available installation methods: Desk Clamp and Grommet Base. The Desk Clamp supports desk thicknesses from 10mm to 85mm. The Grommet Base supports desk thicknesses from 10mm to 80mm with a hole diameter from 10mm to 85mm.

4.3. Twaħħil tal-Monitor

This mount is compatible with monitors between 13 and 32 inches, with VESA mounting patterns of 75x75mm or 100x100mm, and weighing up to 10 kg.

Carefully align your monitor's VESA holes with the mounting plate on the arm.
Secure the monitor to the plate using the appropriate screws provided. Ensure they are tightened firmly but do not overtighten.

Monitor mounted on the BONTEC arm, showing screen size compatibility and weight capacity — Figure 2: A monitor securely mounted on the BONTEC arm, demonstrating compatibility with screens from 13 to 32 inches and a maximum capacity of 10 kg. The image also highlights VESA compatibility for 75x75mm and 100x100mm patterns.

5. Istruzzjonijiet Operattivi u Aġġustamenti

The BONTEC monitor mount offers a range of adjustments for optimal viewkumdità.

5.1. Aġġustament tal-Għoli

To adjust the monitor's height, loosen the screw on the pole collar, slide the arm to the desired position, and then re-tighten the screw firmly.

Adjustable height feature of the monitor arm, showing a range of 430mm — Figure 3: The monitor arm's adjustable height feature, illustrating the vertical movement range of up to 430mm along the main pole.

5.2. Aġġustament tal-Mejjel

The monitor can be tilted up or down to reduce glare and optimize viewing angles. Loosen the tilt screw on the VESA plate, adjust the angle, and then re-tighten.

Full motion adjustment showing tilt and rotation capabilities — Figure 4: Demonstrates the full motion adjustment capabilities, including a tilt range of ±90° and 360° rotation for portrait or landscape orientation.

5.3. Dawra u Rotazzjoni

The arm allows for 180-degree swivel at multiple joints, and the VESA plate can rotate 360 degrees, enabling easy switching between landscape and portrait orientations.

Angle adjustment illustration showing 180 degree swivel at arm joints — Figure 5: An illustration detailing the angle adjustment, showing the arm's ability to swivel 180° at its joints for flexible positioning.

5.4. Ġestjoni tal-Kejbil

Utilize the integrated cable management clips along the arm to route and organize your power and AV cables, keeping your workspace neat and clutter-free.

Multiple features including integrated cable management and Allen key storage — Figure 6: Highlights multiple features of the monitor arm, including the integrated cable management system to keep wires organized and a convenient storage slot for the included Allen keys on the main pole.

6. Manutenzjoni

Iċċekkja regolarment il-viti u l-konnessjonijiet kollha biex tiżgura li jibqgħu ssikkati u siguri.
Naddaf il-muntatura b'ċarruta ratba, damp drapp. Evita prodotti tat-tindif jew solventi li joborxu.
Do not lubricate any parts of the mount unless specifically instructed.

7 Issolvi l-problemi

Problema	Kawża Possibbli	Soluzzjoni
Monitor is wobbly or unstable.	Mounting screws are loose; desk clamp/grommet base is not tight enough; monitor weight exceeds limit.	Ensure all screws are tightened. Re-tighten the desk clamp or grommet base. Verify monitor weight is within 10 kg.
Difficulty adjusting arm movement.	Il-ġonot huma ssikkati wisq.	Use the provided Allen keys to slightly loosen the screws at the arm joints until desired movement is achieved.
VESA plate does not align with monitor holes.	Incorrect VESA pattern; plate installed backward.	Verify your monitor's VESA pattern (75x75mm or 100x100mm). Ensure the VESA plate is oriented correctly as per instructions.

8. Speċifikazzjonijiet

Ditta: BONTEC
Kulur: Iswed
Apparati Kompatibbli: Monitors (LCD, LED)
Kompatibbiltà tad-Daqs tal-Iskrin: 13-32 inches (33-81cm diagonal)
Kompatibbiltà VESA: 75x75mm, 100x100mm
Tip ta 'Immuntar: Desk Mount (Clamp jew Grommet)
Karatteristika Speċjali: Adjustable (Height, Tilt, Swivel, Rotation)
Materjal: Azzar Liga
Dimensjonijiet tal-oġġett (L x W x H): 39 x 7.5 x 43 ċentimetru
Limitu tal-Piż: 10 Kilogrammi
Livell ta' Reżistenza għall-Ilma: Mhux Reżistenti għall-Ilma

9. Garanzija u Appoġġ

BONTEC is committed to providing high-quality products and excellent customer service. This product is backed by technical support to assist you with any questions or concerns you may have during assembly or use.

For technical assistance or warranty inquiries, please refer to the contact information provided with your purchase or visit the official BONTEC websit.