AIBOO YK-300000160

AIBOO RGB Color Changing LED Under Cabinet Lights Kit

Model: YK-300000160

Introduzzjoni

This instruction manual provides detailed information on the installation, operation, and maintenance of your AIBOO RGB Color Changing LED Under Cabinet Lights Kit. Designed for versatile indoor lighting, these puck lights offer vibrant color options and dimmable functionality to enhance various spaces such as kitchens, wardrobes, and furniture.

Kontenut tal-Pakkett

Iċċekkja li l-komponenti kollha elenkati hawn taħt huma inklużi fil-pakkett tiegħek:

  • 6 x LED Puck Lights (Aluminum)
  • 1 x AC120V to DC12V Adapter
  • 1 x 8-Way Splitter
  • 1 x RF Wireless Remote Control
  • 2 x Extension Cables (60 inches each)
  • 1 x Swiċċ mixgħul/mitfi
  • 12 x Tejpijiet Adeżivi
  • 12 x Viti
Components of the AIBOO LED Under Cabinet Lights Kit
Image: All components included in the AIBOO RGB LED Under Cabinet Lights Kit, laid out on a white surface. This includes six puck lights, an adapter, an 8-way splitter, an RF remote control, extension cables, an on/off switch, adhesive tapes, and screws.

Setup u Installazzjoni

Follow these steps to properly set up and install your AIBOO LED Under Cabinet Lights:

  1. Tqassim tal-Pjan: Determine the desired placement for each puck light under your cabinet or furniture. Consider the length of the cables and the location of the power outlet.
  2. Connect Puck Lights to Splitter: Connect the cables from each RGB puck light to the 8-way splitter. Ensure a secure connection for each light.
  3. Connect Splitter to Controller: Connect the splitter to the LED controller. Pay attention to the arrow indicators on the connectors to ensure correct polarity.
  4. Connect Controller to Adapter: Connect the LED controller to the DC12V power adapter.
  5. Connect Adapter to Power: Plug the power adapter into a standard AC120V wall outlet.
  6. Dwal tal-Muntanja: Use the provided adhesive tapes or screws to securely mount the puck lights in your desired locations. The aluminum housing provides good heat dissipation.
Dimensions of AIBOO LED Puck Lights and components
Image: Detailed dimensions of the puck lights (2.4 inches diameter, 0.3 inches thick), 8-way splitter (3x1.4x0.66 inches), controller (11.8 inches), on/off switch (19.7 inches), and power adapter (60 inches cable length). This helps in planning installation.

Gwida tal-Vidjow tal-Installazzjoni

For a visual guide on the connection sequence, please refer to the video below:

Video: This video demonstrates the step-by-step connection process for the AIBOO RGB LED Under Cabinet Lights, showing how to link the puck lights to the splitter, controller, and power adapter.

Istruzzjonijiet Operattivi

Your AIBOO LED Under Cabinet Lights are controlled by an RF wireless remote. This remote allows for various lighting effects and adjustments.

Funzjonijiet tal-Kontroll mill-bogħod:

AIBOO RF Wireless Remote Control layout and functions
Image: The RF wireless remote control showing its buttons and their functions. It features power on/off, speed adjustment (10 levels), dynamic modes (22 types), static color selection (20 colors), and brightness adjustment (5 levels).
  • Power On/Off: Uża l- ON u OFF buttons to turn the lights on or off.
  • Għażla tal-Kulur Statiku: Choose from 20 static colors using the color palette buttons. Note that the "white" color is a mix of red, blue, and green light, not a pure white.
  • Aġġustament tal-luminożità: Adjust the brightness of static colors using the BRILL + u BRIGHT - buttons (5 levels).
  • Modi dinamiċi: Select from 22 dynamic modes using the MODE + u MODE - buttuni.
  • Aġġustament tal-veloċità: Adjust the speed of dynamic modes using the VELOĊITÀ + u VELOĊITÀ - buttons (10 levels).
  • Modalità DEMO: Agħfas il- DEMO button to cycle through various dynamic effects.
  • RF Wireless Advantage: Unlike IR remotes, the RF remote does not require direct line-of-sight and has a range of up to 49 feet.
AIBOO LED Puck Lights displaying various colors
Image: A single puck light shown changing through various RGB colors, demonstrating the color-changing capability of the lights.

Manutenzjoni

To ensure the longevity and optimal performance of your AIBOO LED Under Cabinet Lights, follow these simple maintenance guidelines:

  • Tindif: Gently wipe the puck lights and cables with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as they may damage the finish or electronic components.
  • Skonnettjar tal-Enerġija: Always disconnect the power adapter from the wall outlet before performing any cleaning or maintenance.
  • Użu fuq ġewwa biss: These lights are designed for indoor use only. Avoid exposure to moisture, high humidity, or extreme temperatures.
  • Ġestjoni tal-Kejbil: Ensure cables are not pinched or excessively bent, which could lead to damage.

Issolvi l-problemi

If you encounter any issues with your AIBOO LED Under Cabinet Lights, refer to the following common problems and solutions:

ProblemaKawża PossibbliSoluzzjoni
Id-dwal ma jixegħlux.
  • Power adapter not plugged in.
  • Konnessjonijiet sfużi.
  • Remote control battery low or dead.
  • Funzjonament ħażin tal-kontrollur.
  • Kun żgur li l-adapter tal-enerġija huwa pplaggjat sew f'ħanut tax-xogħol.
  • Check all cable connections (puck lights to splitter, splitter to controller, controller to adapter) for tightness.
  • Ibdel il-batterija CR2 fil-kontroll mill-bogħod.
  • Contact customer support if the controller is suspected to be faulty.
Id-dwal jitteptep jew jibdlu l-kuluri b'mod irregolari.
  • Konnessjonijiet sfużi.
  • Interference from other RF devices.
  • Kwistjoni tal-kontrollur.
  • Iċċekkja l-konnessjonijiet kollha tal-kejbil.
  • Move the lights or controller away from other electronic devices that might cause interference.
  • Try resetting the controller (refer to remote pairing instructions if available, or power cycle).
Il-kontroll remot mhux qed jirrispondi.
  • Batterija baxxa jew mejta.
  • Ir-remote mhux imqabbad mal-kontrollur.
  • Ibdel il-batterija CR2.
  • To pair: Press SPEED+ and SPEED- at the same time until the lights flicker. This indicates successful pairing.
"White" color appears tinted.
  • Inherent design of RGB LEDs.
  • The white color is a mix of red, blue, and green light, not a pure white. This is normal for RGB lights. If pure white is desired, consider an RGBW set.

Speċifikazzjonijiet

KaratteristikaDettall
BrandAIBOO
Numru tal-MudellYK-300000160
Tip ta' Sors tad-DawlLED
Kulur DawlRGB (Bidla tal-Kulur)
Numru ta' Dwal6 Dwal Puck
MaterjalAluminju
Sors tal-EnerġijaCorded Elettriku
Voltage12 Volts
Wattage12 Watts
Fluss Luminuż1200 Lumen
Karatteristika SpeċjaliDimmable
Tip ta' KontrollurKontroll mill-bogħod mingħajr fili RF
Użu fuq ġewwa/barraĠewwa
Piż tal-oġġett1.1 Liri
Dimensjonijiet tal-Prodott (L x W x H)7.87 x 5.91 x 2.76 pulzieri
Tip ta 'Immuntar2-sided tape / Screws
Tip ta 'Batterija Remota1 batterija CR2 meħtieġa (mhux inkluża)

Garanzija u Appoġġ

For warranty information or technical support, please contact AIBOO Lighting directly. You can find more information and contact details on their Amazon store page:

AIBOO Lighting Amazon Store

Additionally, protection plans are available for purchase to extend coverage for your product:

© 2024 AIBOO. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.