RICOO S2922 TV Wall Mount Istruzzjoni Manwal

Introduzzjoni

Thank you for choosing the RICOO S2922 TV Wall Mount. This manual provides essential information for the safe and correct installation, operation, and maintenance of your wall mount. Please read these instructions thoroughly before installation and keep them for future reference.

The RICOO S2922 is a versatile TV monitor wall mount designed for screens ranging from approximately 27 to 55 inches. It offers swivel and tilt adjustments for optimal viewing angles and supports VESA mounting patterns up to 200x200 mm, with a maximum load capacity of 25 kg (55 lbs).

Informazzjoni dwar is-Sigurtà

WARNING: Improper installation may result in serious personal injury or damage to your equipment. If you do not understand these instructions, or have doubts about the safety of the installation, please consult a qualified professional.

• Kun żgur li l-wiċċ tal-immuntar jista' jsostni b'mod sikur il-piż ikkombinat tal-immuntar u d-displej.
• This mount is designed for installation on solid concrete walls only. Do not install on drywall or plasterboard without proper reinforcement.
• Teċċedix il-kapaċità massima tal-piż ta' 25 kg (55 lbs).
• Always use the provided screws and hardware. If your TV requires different screws, ensure they are compatible and of appropriate length.
• Żomm il-partijiet żgħar kollha 'l bogħod mit-tfal.
• Iċċekkja l-konnessjonijiet kollha perjodikament biex tiżgura li jibqgħu siguri.

Kontenut tal-Pakkett

Please verify that all components are present and undamaged before installation. If any parts are missing or defective, contact RICOO customer support.

• Assemblea tal-Pjanċa tal-Ħajt
• TV Bracket Plate
• Mounting Hardware Kit (screws, washers, spacers for TV and wall, concrete anchors)
• Manwal ta' Istruzzjoni

Immaġni: Fuqview of the RICOO S2922 TV Wall Mount showing its main components and key features like max weight, VESA compatibility, and movement ranges.

Setup u Installazzjoni

1. Check VESA Compatibility

Before starting, ensure your TV's VESA mounting pattern is compatible with the S2922 mount. This mount supports VESA patterns: 75x75, 100x100, 200x100, and 200x200 mm. Note: VESA 100x200 mm is NOT supported.

Image: Guide to measure VESA pattern on a TV and a chart indicating supported VESA sizes for the S2922 mount.

2. Ipprepara l-Ħajt

This mount is designed for solid concrete walls. Use a stud finder to ensure there are no hidden pipes or electrical wires in the drilling area. Determine the desired height for your TV.

3. Immarka u Ħaffer Toqob

• Position the wall plate assembly against the wall at the desired height and use a pencil to mark the drilling points.
• Drill pilot holes at the marked locations. For concrete walls, use a masonry drill bit of appropriate size (refer to hardware kit instructions) and drill to the specified depth.
• Daħħal l-ankri tal-konkrit fit-toqob imtaqqbin.

4. Attach Wall Plate to Wall

Secure the wall plate assembly to the wall using the provided screws and washers. Ensure the wall plate is level before fully tightening all screws.

5. Attach TV Brackets to TV

• Poġġi t-TV tiegħek b'attenzjoni wiċċu 'l isfel fuq wiċċ artab u nadif.
• Attach the TV bracket plate to the back of your TV using the appropriate screws, washers, and spacers from the hardware kit. Ensure the brackets are centered and securely fastened. Do not overtighten.

6. Mount TV to Wall Plate

With assistance, carefully lift the TV and hook the TV bracket plate onto the wall plate assembly. Ensure the TV is securely seated on the wall mount. Engage any safety locking mechanisms if present.

Image: Technical drawing showing detailed dimensions of the wall mount and VESA plate, including wall distance and movement ranges.

Operating Instructions (Adjustments)

The RICOO S2922 mount allows for flexible positioning of your TV to achieve the best viewing esperjenza.

Swivel/Pivot Adjustment

The mount allows for swivelling/pivoting up to 180 degrees, depending on the width of your display. Gently push or pull the TV to the desired left or right angle.

Aġġustament tal-Mejjel

The TV can be tilted +12 degrees upwards and -8 degrees downwards. Loosen the tilt adjustment screws on the TV bracket, adjust the screen to the desired vertical angle, and then retighten the screws to secure the position.

Aġġustament tad-Distanza tal-Ħajt

The wall distance can be adjusted between 48mm (minimum) and 213mm (maximum) by extending or retracting the arm.

Image: Visual representation of the mount's swivel and tilt capabilities, along with integrated cable management features.

Manutenzjoni

• Iċċekkja perjodikament il-viti u l-konnessjonijiet kollha biex tiżgura li huma ssikkati u siguri.
• Naddaf il-muntatura b'ċarruta ratba u niexfa. Tużax prodotti tat-tindif jew solventi li joborxu.
• If any part becomes damaged or worn, discontinue use and contact customer support for replacement parts.

Issolvi l-problemi

It-TV mhux livellat wara l-installazzjoni

Ensure the wall plate was installed level. If the TV bracket allows for minor rotational adjustment, loosen the relevant screws, adjust the TV, and retighten. Otherwise, the wall plate may need to be re-installed.

Mount iħoss maħlul jew instabbli

Immediately remove the TV from the mount. Check all wall mounting screws and TV attachment screws for tightness. Ensure the wall material is appropriate for the mount and that anchors are properly seated. Do not remount the TV until the issue is resolved.

Difficulty adjusting tilt or swivel

Check if any adjustment screws are overtightened. Loosen them slightly to allow movement, then retighten to secure the desired position. Ensure no cables are obstructing movement.

Speċifikazzjonijiet

Immaġni: Side profile of the TV mount, illustrating its extension from the wall and relative size.

Garanzija u Appoġġ

Informazzjoni dwar Garanzija

This product comes with a legal warranty of 24 months on new goods from the date of purchase.

Appoġġ għall-Klijent

If you have any questions about our products, require assistance with installation, or need to claim warranty, please contact our support team:

Email: support@ricoo.de