Crosley C200 Direct-Drive Turntable Instruction Manual

Introduzzjoni

This manual provides detailed instructions for the setup, operation, and maintenance of your Crosley C200 Direct-Drive Turntable. Please read this manual thoroughly before using the product to ensure proper function and longevity.

Istruzzjonijiet Importanti dwar is-Sigurtà

• Aqra l-istruzzjonijiet kollha qabel l-użu.
• Żomm dan il-manwal għal referenza futura.
• Tużax dan l-apparat ħdejn l-ilma.
• Naddaf biss b'ċarruta niexfa.
• Timblokkax il-fetħiet tal-ventilazzjoni. Installa skont l-istruzzjonijiet tal-manifattur.
• Tinstallax ħdejn xi sorsi tas-sħana bħal radjaturi, reġistri tas-sħana, stufi, jew apparat ieħor (inkluż amplifiers) li jipproduċu sħana.
• Ipproteġi l-korda tad-dawl milli timxi fuqha jew maqrusa, partikolarment fil-plakek, ir-reċipjenti tal-konvenjenza, u l-punt fejn joħorġu mill-apparat.
• Uża biss aċċessorji/aċċessorji speċifikati mill-manifattur.
• Aqla’ dan l-apparat waqt maltempati tas-sajjetti jew meta ma jintużax għal perjodi twal ta’ żmien.
• Irreferi l-manutenzjoni kollha lil persunal tas-servizz kwalifikat. Is-servizz huwa meħtieġ meta l-apparat ikun ġie bil-ħsara b'xi mod, bħal korda tal-provvista tal-enerġija jew plagg ikun bil-ħsara, likwidu jkun inxtered jew oġġetti jkunu waqgħu fl-apparat, l-apparat ikun ġie espost għax-xita jew umdità, ma jaħdimx b'mod normali , jew twaqqgħet.

Kontenut tal-Pakkett

Ensure all items listed below are included in your package:

• Crosley C200 Direct Drive Turntable
• Manwal għall-Utent (dan id-dokument)
• Qoxra tat-Trab
• Platter biċ-Ċinturin tas-Sewqan
• Felt Slip Mat
• Kontrapiż
• Head Shell with Audio-Technica Magnetic Cartridge
• Adapter 45 RPM
• RCA Output Cables

Komponenti Matulview

Familiarize yourself with the main components of your turntable.

Setup

1. Installazzjoni ta 'platter u Drive Belt

1. Carefully place the platter onto the center spindle.
2. Sib iċ-ċinturin tas-sewqan, li huwa installat minn qabel fuq in-naħa ta' taħt tal-platter.
3. Using the red ribbon attached to the drive belt, gently pull the belt over the motor pulley. Ensure the belt is not twisted.
4. Remove the red ribbon.
5. Place the felt slip mat on top of the platter.

2. Tone Arm Assembly and Balancing

1. Installa l-Kontropiż: Slide the counterweight onto the rear of the tone arm with the numbers facing forward.
2. Attach Head Shell: Carefully attach the head shell (with the Audio-Technica cartridge) to the end of the tone arm. Turn the locking nut until it is firmly in place.
3. Neħħi l-Protezzjoni tal-Istilus: Gently remove the clear plastic stylus protector from the cartridge.
4. Unlock Tone Arm: Release the tone arm from its rest using the tone arm lock.
5. Driegħ tat-Ton tal-Bilanċ: Adjust the counterweight by rotating it until the tone arm floats parallel to the platter without touching it. The tone arm should be level.
6. Issettja l-Forza tat-Traċċar: Once balanced, hold the counterweight steady and rotate only the numbered ring to '0' on the center line. Then, rotate the entire counterweight counter-clockwise until the number '2' aligns with the center line. This sets the tracking force to 2 grams, which is optimal for the included cartridge.
7. Issettja l-Anti-Skate: Locate the anti-skating dial near the tone arm base. Set this dial to '2' to match the tracking force.
8. Lock Tone Arm: Return the tone arm to its rest and secure it with the tone arm lock.

3. Connecting to Audio System

1. Connect the RCA output cables from the turntable to your amplifier jew kelliema powered.
2. Use the PHONO/LINE switch on the rear of the turntable to select the appropriate output:
   • FONU: Uża jekk tiegħek ampIl-lifier għandu input phono dedikat.
   • LINJA: Uża jekk tiegħek amplifier has a standard auxiliary input or if connecting to powered speakers. The turntable's built-in pre-amplifier will be active.
3. Connect the power adapter to the turntable and then to a wall outlet.

Istruzzjonijiet Operattivi

1. Daqq Rekord

1. Poġġi diska fuq il-platter. Jekk qed iddoqq single ta' 45 RPM, uża l-adapter ta' 45 RPM inkluż.
2. Select the correct speed (33 1/3 or 45 RPM) using the speed selector switch.
3. Unlock the tone arm from its rest.
4. Erfa' l-lieva tal-kueing biex tgħolli d-driegħ tat-ton.
5. Manually position the tone arm over the desired starting groove of the record.
6. Gently lower the cueing lever to allow the stylus to descend onto the record.
7. To stop playback, lift the cueing lever, return the tone arm to its rest, and lock it.

2. Bluetooth Connectivity (Built-In Receiver)

The Crosley C200 features a built-in Bluetooth receiver, allowing you to stream audio from a Bluetooth-enabled device to the turntable's output. This means you can use the turntable as a Bluetooth speaker for your phone or tablet.

1. Kun żgur li t-turntable tkun mixgħula.
2. Activate Bluetooth pairing mode on your external device (e.g., smartphone, tablet).
3. Fittex għal "Crosley C200" in your device's Bluetooth settings and select it to pair.
4. Once paired, audio from your device will play through the turntable's connected speakers/ampaktar ħaj.

Nota: The Bluetooth feature is for receiving audio biex the turntable, not for transmitting audio minn the turntable to Bluetooth speakers.

Manutenzjoni

1. Tindif tal-Istilus

• Use a soft brush designed for stylus cleaning.
• Brush gently from back to front (in the direction of the stylus's movement across the record).
• Do not brush from side to side, as this can damage the stylus.

2. Tindif tat-Turntable

• Wipe the dust cover and turntable cabinet with a soft, dry cloth.
• Evita li tuża kimiċi ħarxa jew tindif li joborxu.

3. Replacing the Stylus

The stylus should be replaced after approximately 300-500 hours of playback. Refer to the Audio-Technica cartridge manual for specific replacement instructions or consult a qualified technician.

Issolvi l-problemi

Speċifikazzjonijiet

• Mudell: C200A-BK
• Ditta: Crosley
• Tip tas-sewqan: Drive Dirett
• Mutur: Torque għoli
• Veloċitajiet: 33 1/3, 45 RPM
• Operazzjoni: Kompletament Manwali
• Driegħ tat-Ton: Balanced S-Shaped with hydraulic lift control, anti-skate, height adjustment, and lockable rest
• Skartoċċ: Audio-Technica Magnetic Cartridge
• qabelampaktar ħaj: Built-in switchable phono pre-ampaktar ħaj
• Outputs: Detachable RCA output cables
• Platter: Damped die-cast aluminum with felt slip mat
• Karatteristika Speċjali: Riċevitur Bluetooth inkorporat
• Materjal: Aluminum (platter), Black finish
• Dimensjonijiet tal-Prodott: 11.02 x 17.72 x 5.47 pulzieri
• Piż tal-oġġett: 11.02 liri
• Apparati Kompatibbli: Kelliem, Amplifier, Riċevitur AV

Garanzija u Appoġġ

For warranty information, please refer to the documentation included with your purchase or visit the official Crosley websit. Għal appoġġ tekniku jew mistoqsijiet dwar is-servizz, jekk jogħġbok ikkuntattja lis-servizz tal-konsumatur ta' Crosley.

Manifattur: Crosley

Data L-Ewwel Disponibbli: 22 ta’ Diċembru 2015

Vidjows Uffiċjali tal-Prodott