EGLO Tarbes 3-Light Pendant Lighting Fixture

Istruzzjonijiet Importanti dwar is-Sigurtà

Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be fatal or cause property damage.

• TWISSIJA: Riskju ta' xokk elettriku. Skonnettja l-provvista tal-enerġija mill-kaxxa tal-fjużijiet jew mis-circuit breaker qabel l-installazzjoni jew is-servizz.
• Il-konnessjonijiet elettriċi kollha għandhom ikunu skont il-kodiċijiet lokali, l-ordinanzi, jew il-Kodiċi Elettriku Nazzjonali (NEC). Ikkuntattja elettriċista kwalifikat jekk m'intix familjari mal-konnessjonijiet xierqa tal-wajers elettriċi.
• This fixture is designed for indoor, dry location use only. Do not install in wet or damp żoni.
• Kun żgur li l-wiċċ tal-immuntar jista' jsostni l-piż tal-apparat.
• Propożizzjoni 65 Twissija: Dan il-prodott jista 'jkun fih kimiċi magħrufa mill-Istat ta' Kalifornja li jikkawżaw kanċer u difetti fit-twelid jew ħsara riproduttiva oħra.

Prodott Overview

The EGLO Tarbes 3-Light Pendant is an adjustable lighting fixture designed for indoor use, suitable for kitchen islands, hallways, and dining rooms. It features three individual pendant lights with geometric metal shades, suspended from a linear canopy. The fixture is finished in matte black, offering a contemporary aesthetic.

Image: EGLO Tarbes 3-Light Pendant Fixture. This image shows the complete pendant light fixture with three individual lights, each featuring a geometric metal shade, suspended from a linear bar in matte black finish.

Kontenut tal-Pakkett

Verify that all components are present before beginning installation. If any parts are missing or damaged, do not attempt to assemble or install the fixture. Contact customer support for assistance.

• Light Fixture Assembly (Canopy, Suspension Rods, 3 Pendant Shades with Sockets)
• Mounting Hardware (Crossbar, Mounting Screws, Wire Nuts)
• Manwal ta' Istruzzjoni

Nota: Il-bozoz tad-dawl mhumiex inklużi u jridu jinxtraw separatament.

Speċifikazzjonijiet

Image: EGLO Tarbes 3-Light Pendant with dimensions. This diagram illustrates the overall dimensions of the fixture, including the 31.06-inch length of the bar, 6.3-inch width of the shades, and an adjustable maximum hanging height of 72 inches. It also indicates "Indoor" use and "3 x 100W E26" bulb requirements.

Gwida għall-Installazzjoni

Għodod Meħtieġa (Mhux Inklużi):

• Tornavit tar-ras Phillips
• Tornavit bir-ras ċatta
• Strippers tal-Wajer
• Tejp Elettriku
• Sellum
• Nuċċalijiet tas-Sigurtà

Installazzjoni pass pass:

1. Itfi l-Enerġija: Before starting, ensure the power to the circuit at the circuit breaker or fuse box is completely OFF. This is a critical safety step.
2. Ipprepara l-Wiċċ tal-Immuntar: Jekk qed tissostitwixxi apparat eżistenti, neħħih bir-reqqa. Kun żgur li l-kaxxa tal-junction hija mmuntata sew u kapaċi ssostni l-piż tal-apparat.
3. Install Mounting Crossbar: Attach the mounting crossbar to the junction box using the provided mounting screws. Ensure it is firmly secured.
4. Adjust Pendant Height: The length of each pendant cord can be adjusted. Determine the desired hanging height for each light. Loosen the set screw on the canopy where the cord enters, adjust the cord to the desired length, and then tighten the set screw to secure it. Repeat for all three pendants.
5. Agħmel Konnessjonijiet elettriċi:
   • Qabbad il- iswed wajer mill-apparat sal- iswed (Live) wire from the junction box using a wire nut.
   • Qabbad il- abjad wajer mill-apparat sal- abjad (Neutral) wire from the junction box using a wire nut.
   • Qabbad il- art wajer (ram mikxuf jew aħdar) mill-apparat sal- art wire from the junction box and to the mounting crossbar's ground screw.
   • Ensure all wire nuts are securely tightened and connections are covered with electrical tape if necessary.
6. Mount Fixture Canopy: Carefully tuck all wires into the junction box. Align the fixture canopy with the mounting screws on the crossbar and secure it in place using the provided cap nuts or screws.
7. Installa Bozoz tad-Dawl: Screw in three (3) incandescent bulbs with an E26 base, not exceeding 100 watts each.
8. Irrestawra l-Enerġija: Once installation is complete and all connections are secure, restore power at the circuit breaker or fuse box. Test the fixture.

Image: EGLO Tarbes 3-Light Pendant installed over a kitchen island. This image demonstrates the fixture's appearance in a typical home environment, highlighting its use over a kitchen island.

Istruzzjonijiet Operattivi

This pendant light fixture operates with standard wall switches. Ensure appropriate E26 base incandescent bulbs (max 100W per bulb) are installed. The fixture is designed for use with 120V electrical systems.

• Power On/Off: Uża s-swiċċ tal-ħajt imqabbad mal-apparat tad-dawl biex tixgħel jew titfi d-dwal.
• Tip ta' bozza: Use E26 base bulbs. Incandescent bulbs up to 100 watts per socket are supported. For energy efficiency, LED or CFL bulbs with an E26 base can also be used, provided their wattage equivalent does not exceed 100W and they are compatible with the fixture's electrical system.

Manutenzjoni

Tindif:

• Dejjem skonnettja l-enerġija qabel it-tindif.
• Imsaħ l-apparat b'ċarruta ratba u niexfa.
• Do not use harsh chemicals, abrasive cleaners, or polishes as they may damage the finish.

Sostituzzjoni tal-bozza:

• Ensure the power is OFF and the bulbs have cooled completely before attempting to replace them.
• Ħoll il-bozza l-qadima mis-sokit bir-reqqa.
• Screw in a new E26 base bulb, ensuring it does not exceed 100 watts.
• Irrestawra l-enerġija u ittestja l-bozza l-ġdida.

Issolvi l-problemi

Informazzjoni dwar Garanzija

EGLO products are covered by a garanzija ta 'sena from the date of original shipment when purchased on Amazon. This warranty covers items and conditions identified in the original manufacturer's warranty. Additionally, a Politika ta' 30 jum dwar il-partijiet ta' sostituzzjoni is in place to ensure a fully working item.

Esklużjonijiet: The warranty specifically does not cover loss and theft, water damage, customer abuse, and finish deterioration due to UV or coastal exposure.

Appoġġ għall-Klijent

For further assistance, missing parts, or warranty claims, please contact EGLO customer support.

You can visit the official EGLO store on Amazon for more information and contact options: EGLO Amazon Store