1. Introduzzjoni
This manual provides essential information for the proper installation, operation, and maintenance of your HELLA DE/LED 90mm Performance L4060 Headlight Kit. Please read these instructions carefully before proceeding with installation or use to ensure safe and optimal performance. This product is designed for 12V and 24V vehicle electrical systems.
2. Informazzjoni dwar is-Sigurtà
- Dejjem skonnettja l-batterija tal-vettura qabel ma tagħmel xi xogħol elettriku biex tevita short circuits u xokk elettriku.
- Ensure all connections are secure and properly insulated to prevent moisture ingress and corrosion.
- Tħarisx direttament fis-sors tad-dawl LED meta jkun attiv, għax dan jista' jikkawża ħsara lill-għajnejn.
- L-installazzjoni għandha titwettaq minn persunal kwalifikat jekk m'intix ċert dwar xi passi.
- Verify local regulations and laws regarding vehicle lighting before installation and use.
3. Kontenut tal-Pakkett
Please check the package for the following components:
- 1x HELLA DE/LED 90mm Performance L4060 Headlight Module (Right side)
- Mounting hardware (screws, clips, etc.)
- Manwal ta' Istruzzjoni

Stampa 3.1: Included mounting hardware for the headlight module.
4. Konfigurazzjoni (Installazzjoni)
4.1 Verifiki ta' qabel l-installazzjoni
- Ensure the vehicle's electrical system is compatible with 12V or 24V operation.
- Confirm that the mounting location provides sufficient space and ventilation for the headlight module.
- Gather all necessary tools (screwdrivers, wire strippers, crimping tool, multimeter, etc.).
4.2 Mounting the Headlight Module
- Identify the designated mounting position for the 90mm headlight module.
- Secure the module using the provided mounting hardware. Ensure it is firmly attached and correctly oriented (e.g., right side).
- The robust die-cast aluminum housing is designed for durability and heat dissipation.

Stampa 4.1: Quddiem view of the HELLA DE/LED 90mm headlight module.

Stampa 4.2: Ġenb view of the headlight module, showing the integrated electronics and product label.
4.3 Konnessjoni Elettrika
The headlight module features a DEUTSCH plug for reliable electrical connection. Refer to your vehicle's wiring diagram for specific connection points.
- Connect the power supply (12V or 24V) to the appropriate pins on the DEUTSCH connector.
- Connect the control wires for the position light, daytime running light (DRL), and low beam functions.
- Ensure all connections are tight and protected from environmental elements.

Stampa 4.3: Wara view of the headlight module, showing the DEUTSCH connector for electrical hookup.
5. Istruzzjonijiet Operattivi
The HELLA DE/LED 90mm Performance L4060 Headlight Kit offers three primary light functions:
- Position Light (LED): Provides a homogeneous ring-shaped light for vehicle visibility.
- Daytime Running Light (LED): Offers enhanced visibility during daylight hours with a distinctive ring-shaped illumination.
- Low Beam (LED): Provides primary forward illumination for driving in low-light conditions or at night.
These functions are typically controlled via your vehicle's existing lighting switches and systems. Consult your vehicle's owner's manual for specific operation of these lighting modes.
6. Manutenzjoni
6.1 Tindif
- Clean the lens regularly with a soft cloth and mild soap solution.
- Avoid abrasive cleaners or solvents that could damage the polycarbonate lens material.
6.2 Spezzjoni
- Periodically check all electrical connections for corrosion or looseness.
- Inspect the mounting points to ensure the headlight remains securely fastened.
- Verify that all light functions (position, DRL, low beam) are operating correctly.
7 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Headlight does not illuminate | No power supply; faulty wiring; blown fuse | Check power connections; inspect wiring for damage; check vehicle's fuse box. |
| Operazzjoni intermittenti | Loose connection; poor ground connection | Secure all electrical connections; verify ground point. |
| Produzzjoni ta' dawl imnaqqsa | Dirty lens; voltagqatra e | Clean the lens; check voltage at the headlight connector. |
8. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | HELLA |
| Numru tal-Mudell | 1BL012488121 |
| Numru tal-Parti | 1BL 012 488-121 |
| Tip ta' Sors tad-Dawl | LED |
| Voltage | 12V / 24V |
| Wattage | 24 W |
| Funzjonijiet tad-Dawl | Position Light (LED), Daytime Running Light (LED), Low Beam (LED) |
| Dijametru | 90 mm |
| Dimensjonijiet (L x H x D) | 125 mm x 126 mm x 143 mm |
| Materjal tal-Lenti | Polikarbonat |
| Materjal tad-Djar | Aluminju fondut |
| Tip ta' Konnettur | DEUTSCH Plug |
| Kompatibbiltà tal-Vettura | Universal fit for Bus, Car |
| Kompatibilità Elettromanjetika | Yes (EMC) |
9. Garanzija u Appoġġ
For warranty information, please refer to the documentation provided with your purchase or contact HELLA customer service. In case of technical issues or questions not covered in this manual, please reach out to your HELLA dealer or visit the official HELLA websit għall-appoġġ.