1. Introduzzjoni
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Pedrollo JSWm 1AX-N self-priming electric water pump. Please read these instructions carefully before using the pump and keep this manual for future reference.
The Pedrollo JSWm 1AX-N is a self-priming electric pump designed for pumping water. This model is an updated version of the JSWM/1A series.
2. Informazzjoni dwar is-Sigurtà
TWISSIJA: Nuqqas li ssegwi dawn l-istruzzjonijiet ta’ sigurtà jista’ jirriżulta f’xokk elettriku, nar, korriment serju, jew mewt.
- Always disconnect the pump from the power supply before performing any maintenance or installation.
- Ensure the electrical supply matches the pump's specifications (220-230V, 50Hz).
- Il-pompa trid tkun ertjata sew biex tevita xokk elettriku.
- Tħaddimx il-pompa b'kejbils jew plaggs bil-ħsara.
- Do not pump flammable, explosive, or corrosive liquids. This pump is designed for water only.
- Żomm lit-tfal u l-persunal mhux awtorizzat 'il bogħod mill-pompa waqt it-tħaddim.
- Install the pump in a well-ventilated area, protected from direct sunlight and freezing temperatures.
3. Prodott Aktarview
The Pedrollo JSWm 1AX-N is a robust self-priming pump. Key features include:
- Self-priming capability.
- Power: 0.75 kW (0.85 HP).
- Maximum flow rate: 55 liters/minute.
- Maximum head: 43 meters.
- Constructed with Noryl material.
Figure 1: Pedrollo JSWm 1AX-N Self-Priming Electric Water Pump. This image shows the overall view of the blue electric pump with its motor and pump housing.
Figure 2: Pedrollo JSWm 1AX-N Pump Rating Plate. This image displays the technical specifications label on the pump, including model number, power, voltage, frequency, and flow rates.
4. Setup u Installazzjoni
Installazzjoni xierqa hija kruċjali għall-prestazzjoni u l-lonġevità tal-pompa.
- Immuntar: Securely mount the pump on a stable, level surface. Ensure adequate ventilation around the motor.
- Linja tal-ġbid: Connect a rigid, airtight suction pipe to the pump's inlet. The suction line should be as short and straight as possible, with a foot valve at the end submerged in the water source. The pump can draw water from depths up to 9 meters.
- Delivery Line: Connect the delivery pipe to the pump's outlet. Install a check valve if the delivery line is long or has significant vertical lift.
- Priming: Before first use, or if the pump runs dry, fill the pump body completely with water through the priming port until it overflows. Replace the priming plug securely.
- Konnessjoni Elettrika: Connect the pump to a dedicated 220-230V, 50Hz power supply. Ensure proper grounding. A qualified electrician should perform the electrical connection.
5. Istruzzjonijiet Operattivi
- Start-up Inizjali: After priming, switch on the power supply. The pump should start drawing water and build pressure.
- Operazzjoni Kontinwa: Monitor the pump for unusual noises or vibrations. Ensure a continuous water supply to prevent dry running.
- Għalaq: Turn off the power supply to stop the pump.
Nota: The pump is designed for continuous duty (thermally protected).
6. Manutenzjoni
Manutenzjoni regolari tiżgura prestazzjoni ottimali u testendi l-ħajja tal-pompa.
- Tindif: Periodically clean the pump exterior to prevent dirt buildup.
- Winterization: In freezing temperatures, drain all water from the pump and pipes to prevent damage. Store the pump in a frost-free environment.
- Spezzjoni: Regularly check for leaks, damaged cables, or unusual wear. Address any issues promptly.
- Valv tas-saqajn: Ensure the foot valve at the end of the suction line is clear of debris.
7 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Il-pompa ma tibdax | No power supply; Motor overload; Damaged capacitor. | Check power connection and circuit breaker; Allow motor to cool; Consult a qualified technician. |
| Il-pompa taħdem imma l-ebda ilma ma jiġi kkunsinnat | Pump not primed; Air leak in suction line; Suction lift too high; Foot valve blocked. | Re-prime the pump; Check suction line for leaks; Reduce suction lift; Clean foot valve. |
| Fluss jew pressjoni baxxa | Partial blockage in suction/delivery line; Worn impeller; Air in system. | Check and clear lines; Consult technician for impeller replacement; Re-prime pump. |
| Ħsejjes jew vibrazzjonijiet eċċessivi | Cavitation (air in pump); Loose mounting; Worn bearings. | Ensure pump is fully primed and suction line is airtight; Secure mounting bolts; Consult a technician. |
8. Speċifikazzjonijiet
| Speċifikazzjoni | Valur |
|---|---|
| Mudell | JSWm 1AX-N |
| Brand | Pedrollo |
| Qawwa (HP) | 0.75 HP (P2 0.55 kW) |
| Voltage | 220-230 V |
| Frekwenza | 50 Hz |
| Kurrent (Fi) | 3.6 A |
| Max Flow Rate (Q) | 55 l/min |
| Max Head (H) | 43 m |
| Materjal | Noryl |
| Piż | 10 kg (22.05 lbs) |
| Klassi ta' Protezzjoni | IP X4 |
| Klassi ta' Insulazzjoni | F |
| Temperatura Likwida Max | 40 °C |
| Iċ-Ċiklu tax-Xogħol | Continuous duty (Thermally protected) |
9. Garanzija u Appoġġ
For warranty information and technical support, please refer to the official Pedrollo website or contact your authorized Pedrollo dealer. Keep your purchase receipt as proof of purchase.
Pedrollo is a manufacturer based in San Bonifacio (VR) Italy. Contact information may be available on the product's rating plate or official documentation.
Nota: Informazzjoni dwar id-disponibbiltà tal-ispare parts mhijiex ipprovduta fid-dettalji tal-prodott.