M-Wave Lock 'N' Roll Alarm Lock Instruction Manual

Introduzzjoni

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your M-Wave Lock 'N' Roll Alarm Lock. Please read this manual carefully before using the product to ensure proper function and safety.

The M-Wave Lock 'N' Roll Alarm Lock is designed to provide enhanced security for your bicycle or other valuable items. It features a 600 x 2mm cable, a 4-digit customizable combination, and an integrated alarm system that activates upon movement or cable cutting. The alarm sensitivity is adjustable, and the unit is powered by included batteries.

Prodott Overview

Familiarize yourself with the components of your M-Wave Lock 'N' Roll Alarm Lock.

Key features include a built-in 90dB alarm, motion and cut detection, adjustable sensitivity, and a personal PIN code. The device is compact and lightweight, making it easy to transport.

Setup

1. Installazzjoni tal-batterija

The M-Wave Lock 'N' Roll Alarm Lock requires 1 CR123A battery, which is included. To install or replace the battery:

1. Locate the battery compartment on the back of the lock.
2. Iftaħ l-għatu tal-kompartiment.
3. Daħħal il-batterija CR123A, waqt li tiżgura l-polarità korretta (+/-).
4. Agħlaq l-għatu tal-kompartiment tal-batterija sew.

2. Issettjar tal-Kombinazzjoni Tiegħek

The lock comes with a default combination (usually 0000). You can set your personal 4-digit combination from 10,000 possibilities.

1. Ensure the lock is in the "OPEN" position by aligning the current combination (default 0000) with the indicator marks.
2. Locate the "SET" button, usually on the side or back of the lock.
3. Press and hold the "SET" button. While holding it, rotate the dials to your desired 4-digit combination.
4. Release the "SET" button. Your new combination is now set.
5. Importanti: Write down your new combination and store it in a safe place. There is no master key or way to reset the combination if forgotten without knowing the current one.

Istruzzjonijiet Operattivi

1. Qfil tal-Apparat

1. Align your set 4-digit combination to unlock the device.
2. Press the release button to extend the cable head.
3. Thread the cable through the item you wish to secure (e.g., bicycle frame, helmet, bag).
4. Insert the cable head into the locking port on the main unit until you hear a click.
5. Ħawwad il-arloġġi tal-kombinazzjoni biex tiżgura s-serratura.
6. The alarm will arm automatically after a few seconds, indicated by a beep.

2. Nisfruttaw l-Apparat

1. Align your personal 4-digit combination with the indicator marks.
2. The lock will disarm and unlock.
3. Press the release button to remove the cable head from the locking port.

3. Funzjonalità tal-Allarm

The alarm is designed to deter theft by sounding a loud 90-decibel alert if the lock is moved or the cable is cut.

• Sejbien tal-Moviment: If the lock detects significant movement after being armed, it will emit a warning beep. Continued movement will trigger the full 90dB alarm.
• Cable Cut Detection: If the cable is severed, the alarm will immediately sound.
• Sensittività aġġustabbli: The lock features adjustable sensitivity to help prevent accidental alarms. Refer to the "Maintenance" section for details on adjusting sensitivity.

Manutenzjoni

1. Sostituzzjoni tal-batterija

When the alarm sound becomes weak or the lock fails to arm, it's time to replace the battery. Follow the steps outlined in the "Battery Installation" section under "Setup".

2. Tindif

Wipe the lock with a soft, damp drapp. Tużax prodotti tat-tindif jew solventi li joborxu, għax jistgħu jagħmlu ħsara lill-finitura jew lill-komponenti interni.

3. Adjusting Alarm Sensitivity

The M-Wave Lock 'N' Roll Alarm Lock allows for adjustment of its motion sensor sensitivity. This can help reduce false alarms in windy conditions or busy environments.

(Note: Specific instructions for adjusting sensitivity are typically found on the product packaging or a small insert. As this information is not detailed in the provided data, general guidance is given. Users should refer to the physical product's included instructions for precise steps.)

Issolvi l-problemi

Speċifikazzjonijiet

• Mudell: M-Wave Lock 'N' Roll Alarm Lock (Model Number: 230054)
• Tul tal-Cable: Approximately 600 mm (60 cm) / 2mm diameter
• Qawwa tal-Allarm: 90 dB
• Kombinazzjoni: 4-digit resettable combination (10,000 possibilities)
• Sors tal-Enerġija: 1 x CR123A battery (included)
• Dimensjonijiet tal-Prodott: 10 x 19.5 x 2.5 ċm
• Piż tal-oġġett: 120 g
• Kulur: Light Grey (housing)
• Karatteristiċi Speċjali: Alarm, Adjustable Sensitivity, Motion and Cable Cut Detection

Garanzija u Appoġġ

For warranty information and customer support, please contact M-Wave directly or refer to the official M-Wave websit. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri għal kwalunkwe talba ta' garanzija.

Manifattur: Cycle Force Group, LLC.

Data L-Ewwel Disponibbli: 22 ta’ Diċembru 2015

For additional resources and product information, visit the official M-Wave websit: www.m-wave-bike.com