Introduzzjoni
Grazzi tax-xiriasing the Adesso Trio Floor Lamp, Model 4305-22. This versatile floor lamp hija mfassla biex tipprovdi ample lighting and convenient storage solutions within a compact footprint. Featuring three individual lights with pull chain switches and two clear acrylic shelves, it enhances any room with both style and functionality. Please read this manual thoroughly before assembly and use to ensure safe and proper operation.
Figure 1: Adesso Trio Floor Lamp, Model 4305-22
Informazzjoni dwar is-Sigurtà
- Always disconnect the power supply before cleaning, changing bulbs, or performing any maintenance.
- Uża biss bozoz tat-tip u l-ilma speċifikatitage (three 40W incandescent or equivalent CFL/LED bulbs). Exceeding the maximum wattage can create a fire hazard.
- Dan lamp is intended for indoor use only. Do not expose to moisture or extreme temperatures.
- Tiżgura l-lamp jitqiegħed fuq wiċċ stabbli u livellat biex jipprevjeni li jinqaleb.
- Keep the electrical cord away from heat sources, sharp edges, and wet areas.
- The clear acrylic shelves are for light decorative items or storage. Do not place heavy objects on them (maximum weight capacity per shelf is approximately 1.5 lbs).
Kontenut tal-Pakkett
Jekk jogħġbok iċċekkja li l-komponenti kollha huma preżenti qabel tibda l-assemblaġġ:
- Lamp Base (Brushed Steel)
- Vertical Poles (3 sections per pole, total 3 poles)
- White Linen Cylindrical Shades (3 pieces)
- Clear Acrylic Shelves (2 pieces)
- Pull Chain Switches (3 pieces, pre-attached to lamp sokits)
- Hardware Pack (screws, washers, etc., if applicable)
- Korda tal-Enerġija
Setup u Assemblea
Follow these steps to assemble your Adesso Trio Floor Lamp. No special tools are required.
- Ħoll il-Komponenti: Neħħi l-partijiet kollha mill-imballaġġ bir-reqqa u poġġihom fuq wiċċ nadif u artab biex tevita l-grif.
- Arma l-Arbli: Connect the vertical pole sections by gently twisting them clockwise until secure. Ensure the wiring passes freely through the poles.
- Waħħal il-Bażi: Securely attach the assembled poles to the brushed steel lamp bażi.
- Installa l-ixkafef: Slide the two clear acrylic shelves onto the poles at the desired heights. The shelves are designed to fit snugly between the pole sections.
- Ehmeż Lamp Sokits: Ensure the three lamp sockets with pre-attached pull chains are securely fastened to the top of each pole.
- Place Shades: Carefully place each white linen cylindrical shade over its respective lamp sokit.
- Daħħal Basal: Screw three 40-watt incandescent or equivalent CFL/LED bulbs (not included) into the lamp sokits. Tissikkax iżżejjed.
- Pożizzjoni Lamp: Poġġi l-lamp in its desired location, ensuring the power cord is not pinched or obstructed.
Figura 2: Dettall tal-lamp's base and shades.
Istruzzjonijiet Operattivi
- Konnessjoni tal-Enerġija: Ipplaggja l-lamp's clear power cord into a standard electrical outlet. The lamp is smart outlet compatible for integration with smart home systems.
- Tixgħel/Jitfi: Each of the three lights is controlled by its own pull chain switch. Pull the chain once to turn the light on, and pull it again to turn it off. This allows for customizable lighting, enabling you to illuminate one, two, or all three lights as needed.
Figure 3: Key features of the Adesso Trio Floor Lamp.
Manutenzjoni
- Tindif: Biex tnaddaf il-lamp, ensure it is unplugged. Wipe the brushed steel base and poles with a soft, dry cloth. For the white linen shades, use a lint roller or a soft brush to remove dust. The clear acrylic shelves can be wiped with a damp cloth and mild soap, then dried thoroughly. Avoid abrasive cleaners.
- Sostituzzjoni tal-bozza: Dejjem aqla l-lamp before replacing bulbs. Allow old bulbs to cool completely before removal. Replace with three 40-watt incandescent or equivalent CFL/LED bulbs.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Lamp ma jixgħelx. | 1. Lamp mhux imqabbad. 2. Il-bozza hija maħlula jew maħruqa. 3. Power outlet is not functioning. | 1. Ensure the power cord is securely plugged into an active outlet. 2. Tighten or replace the bulb(s). 3. Test the outlet with another device or check your circuit breaker. |
| Teptip ħafif. | 1. Bozza maħlula. 2. Incorrect bulb type/wattage. 3. Bozza difettuża. | 1. Tighten the bulb(s). 2. Ensure bulbs meet specifications (40W incandescent or equivalent CFL/LED). 3. Replace the flickering bulb. |
| Lamp hija instabbli. | 1. Not on a level surface. 2. Poles not fully tightened. | 1. Mexxi l-lamp għal wiċċ ċatt u stabbli. 2. Re-tighten all pole connections. |
Speċifikazzjonijiet
- Numru tal-Mudell: 4305-22
- Dimensjonijiet (D x W x H): 11.7"D x 14"W x 68"H
- Piż tal-oġġett: 15.2 Liri
- Tip ta' Materjal: Metal (Brushed Steel Base), Linen (Shades), Acrylic (Shelves)
- Kulur tad-dell: Abjad
- Numru ta' Sorsi tad-Dawl: 3
- Bażi tal-bozza: E26 Medju
- Wattage: Max 40 watts per bulb (Incandescent or equivalent CFL/LED)
- Tip ta' swiċċ: Pull Chain (3 individual switches)
- Sors tal-Enerġija: Corded Elettriku
- Tul tal-kurdun: Madwar 5 piedi (60 pulzier)
- Tip ta' Installazzjoni: Freestanding
- Użu fuq ġewwa/barra: Ġewwa Biss
Figure 4: Dimensions of the Adesso Trio Floor Lamp.
Informazzjoni dwar Garanzija
Manufacturer Warranty Description: N/a.
For specific warranty details or to inquire about product guarantees, please refer to the documentation provided at the time of purchase or contact the retailer directly.
Appoġġ għall-Klijent
If you have any questions, require assistance with assembly, or encounter issues not covered in this manual, please contact the retailer where you purchased the product or visit the official Adesso websit għal riżorsi ta' appoġġ.
Adesso Uffiċjali Websit: www.adessohome.com