Hager EK570 Battery-Powered Thermostat User Manual

1. Introduzzjoni

This manual provides detailed instructions for the installation, operation, and maintenance of your Hager EK570 battery-powered weekly thermostat. Please read this guide thoroughly before use to ensure proper function, safety, and to maximize the benefits of its programmable features. Keep this manual for future reference.

2. Informazzjoni dwar is-Sigurtà

• Always disconnect power to the heating system before attempting any installation or maintenance.
• Installation should only be performed by a qualified electrician or competent person.
• Do not expose the thermostat to extreme temperatures, direct sunlight, high humidity, or water.
• Use only LR6 (AA) batteries as specified. Do not mix old and new batteries or different types of batteries.
• Żomm l-apparat 'il bogħod mit-tfal.
• Do not attempt to open or repair the thermostat yourself. Refer to qualified service personnel.

3. Kontenut tal-Pakkett

Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett tiegħek:

• Hager EK570 Thermostat Unit
• 2 x LR6 (AA) Batteries
• Viti tal-Immuntar u Plakek tal-Ħajt (jekk applikabbli)
• Dan il-Manwal tal-Utent

4. Prodott Aktarview

Familiarize yourself with the components of your Hager EK570 thermostat:

Figura 1: Quddiem view of the Hager EK570 thermostat. The device features a clear LCD display at the top, two square buttons below the display, and a central control cluster at the bottom with '-', 'OK', and '+' buttons.

• Display LCD: Shows current temperature, time, day, operating mode, and program status.
• Buttuni tal-Kontroll: Used for navigating menus, adjusting settings, and selecting modes. Typically includes 'Mode', 'Set', 'Up', 'Down', and 'OK' buttons.
• Kompartiment tal-batterija: Jinsab fuq wara tal-unità.

5. Setup

5.1. Installazzjoni tal-batterija

1. Neħħi l-għatu ta' wara tat-termostat.
2. Insert the 2 x LR6 (AA) batteries, ensuring correct polarity (+/-).
3. Replace the back cover. The display should now activate.

5.2. Immuntar tat-Termostat

The Hager EK570 is designed for surface mounting.

1. Choose a suitable location on an interior wall, away from direct sunlight, drafts, and heat sources (e.g., radiators, lamps). The recommended height is approximately 1.5 meters from the floor.
2. Carefully detach the front part of the thermostat from its base plate.
3. Mark the drilling points on the wall using the base plate as a template.
4. Drill toqob u daħħal plugs tal-ħajt.
5. Waħħal il-pjanċa tal-bażi mal-ħajt billi tuża l-viti pprovduti.
6. Connect the heating system wires to the terminals on the base plate according to the wiring diagram provided with your heating system. Ensure all connections are secure and correct.
7. Reattach the front part of the thermostat to the base plate, ensuring it clicks securely into place.

5.3. Initial Settings (Time and Date)

Upon first power-up or after battery replacement, you may need to set the current time and day.

1. Press the 'SET' or 'MODE' button to enter the settings menu.
2. Use the '+' or '-' buttons to navigate to 'Time' or 'Date' settings.
3. Press 'OK' to confirm and then use '+' or '-' to adjust the values (hour, minute, day, month, year).
4. Press 'OK' to save each setting and exit the menu.

6. Istruzzjonijiet Operattivi

The Hager EK570 offers various operating modes and programming options to optimize your heating.

6.1. L-Għażla tal-Modalitajiet ta' Operazzjoni

The thermostat supports the following modes:

• Modalità Kumdità: Maintains a comfortable temperature (e.g., 21°C) during occupied periods.
• Modalità Mnaqqsa: Maintains a lower, energy-saving temperature (e.g., 18°C) during unoccupied periods or at night.
• Modalità ta' Protezzjoni mill-Ġlata: Maintains a minimum temperature (e.g., 5°C) to prevent pipes from freezing.
• Modalità Manwali: Allows you to set a constant temperature that overrides any programmed schedule.
• Modalità Vaganza: Maintains a specific temperature for an extended period (e.g., during vacation).

To switch between modes, press the 'MODE' button repeatedly until the desired mode is displayed.

6.2. Adjusting Temperature Setpoint

In any operating mode (except Frost Protection), you can temporarily adjust the temperature setpoint:

1. Use the '+' or '-' buttons to increase or decrease the desired temperature.
2. The new setpoint will be active until the next programmed event or until you manually change it again. This is known as a temporary override.

6.3. Programmazzjoni ta' kull Ġimgħa

The EK570 is a weekly programmable thermostat, allowing you to set up to 48 program steps per day across 4 setpoints (Comfort, Reduced, etc.). It comes with 3 pre-recorded programs and 1 free program for customization.

1. Press the 'PROG' or 'SET' button to enter programming mode.
2. Use '+' or '-' to select the day of the week you wish to program (e.g., Monday, Tuesday, etc.).
3. Press 'OK' to confirm the day.
4. The display will show the first program period. Use '+' or '-' to set the start time and then 'OK'.
5. Next, select the desired operating mode (Comfort, Reduced, etc.) for this period using '+' or '-' and confirm with 'OK'.
6. Repeat steps 4 and 5 for all desired program periods for that day.
7. You can copy programs from one day to another if needed (refer to specific instructions in the full manual for this feature).
8. Exit programming mode by pressing 'PROG' or 'MODE' button.

7. Manutenzjoni

7.1. Tindif

Naddaf it-termostat casing with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical agents, as these can damage the plastic and electronic components.

7.2. Sostituzzjoni tal-batterija

The thermostat is powered by 2 x LR6 (AA) batteries. When the battery symbol appears on the display, or if the display becomes dim, it is time to replace the batteries.

1. Neħħi l-għatu ta' wara tat-termostat.
2. Neħħi l-batteriji qodma.
3. Insert new 2 x LR6 (AA) batteries, observing correct polarity.
4. Erġa 'poġġi l-għatu ta' wara.

The thermostat has a power reserve of approximately 10 minutes, allowing for battery replacement without losing programmed settings, provided the replacement is done promptly.

8 Issolvi l-problemi

9. Speċifikazzjonijiet

10. Garanzija u Appoġġ

For detailed warranty information, technical support, or service inquiries, please refer to the official Hager website or contact your authorized retailer. Keep your purchase receipt as proof of purchase.