Introduzzjoni
This instruction manual provides essential information for the proper use, care, and maintenance of your Vivitar 35-Inch Deluxe Tripod Carrying Case Bag, model VIV-TC-35. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
Informazzjoni dwar is-Sigurtà
- Do not overload the carrying case beyond its intended capacity.
- Ensure all zippers are fully closed before lifting or transporting the case.
- Inspect the case and straps regularly for any signs of wear or damage. Discontinue use if significant damage is observed.
- Keep the case away from open flames or extreme heat sources.
- Aħżen il-kaxxa f'post frisk u niexef meta ma tkunx qed tuża.
Kontenut tal-Pakkett
- Vivitar 35-Inch Deluxe Tripod Carrying Case Bag (VIV-TC-35)
Setup
The Vivitar Tripod Carrying Case is designed for immediate use. No assembly is required. You may adjust the shoulder strap for comfortable carrying.
- Aġġustament taċ-Ċinga tal-Ispalla: Locate the adjustable buckles on the shoulder strap. Slide the buckles to lengthen or shorten the strap to your desired carrying length. Ensure the strap is securely fastened before use.
Operazzjoni
Follow these steps to properly store and transport your tripod.
- Ftuħ il-Każ: Unzip the main zipper along the length of the bag. The top flap is designed for easy access.
- Inserting the Tripod: Carefully place your folded tripod into the case. Ensure it fits within the cylindrical design for optimal protection. The case is designed to fit most tripods up to 35 inches when folded.
- L-għeluq tal-Każ: Once the tripod is inside, securely close the main zipper. Ensure no fabric is caught in the zipper teeth.
- Ġarr tal-Kaxxa: Use the adjustable shoulder strap for hands-free transport or the web handle for quick carrying.

Figura 1: Esterni view of the Vivitar 35-Inch Deluxe Tripod Carrying Case Bag, showing the main zipper, shoulder strap, and web manku.

Figura 2: Intern view of the Vivitar 35-Inch Deluxe Tripod Carrying Case Bag, illustrating the spacious cylindrical compartment for a tripod.
Manutenzjoni
- Tindif: Wipe the exterior of the case with a damp drapp u sapun ħafif jekk meħtieġ. La taħsilx fil-magna tal-ħasil u lanqas fit-tnixxif bit-tumble dryer. Ħallih jinxef kompletament bl-arja.
- Ħażna: When not in use, store the case in a clean, dry environment away from direct sunlight to prevent material degradation.
- Kura taż-żippijiet: Iċċekkja ż-żipp perjodikament għal tħaddim bla xkiel. Jekk isir iebes, tista' tapplika ammont żgħir ta' lubrikant taż-żipp.
Issolvi l-problemi
- Zipper is Stiff or Stuck: Ensure no fabric is caught in the zipper. Apply a small amount of zipper lubricant or a graphite pencil lead to the teeth to improve movement.
- Tripod Does Not Fit: Verify that your tripod is folded to a length of 35 inches or less. The case is designed for cylindrical tripods.
- Skumdità fiċ-ċinga: Adjust the shoulder strap length to distribute weight evenly. Ensure the padded section of the strap rests comfortably on your shoulder.
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Numru tal-Mudell | VIV-TC-35 |
| Materjal | Cordura-webbed nylon |
| Kulur | Iswed |
| Dimensjonijiet tal-Prodott (L x W x H) | 88.9T x 11.4W x 88.9H Ċentimetri (35" T x 4.5" W x 4.5" H) |
| Piż tal-oġġett | 1 Pound (approximately 453.59 g) |
| Tip ta' Għeluq | Zipper |
| Tip taċ-ċinga | Spalla |
| Tip ta' Manku | Web Manku |
| Pocket Description | Zipper Pocket |
Garanzija u Appoġġ
For information regarding warranty coverage or technical support, please refer to the documentation provided with your purchase or visit the official Vivitar webis-sit. Id-dettalji ta' kuntatt għas-servizz tal-konsumatur tipikament jistgħu jinstabu fuq is-sit tal-manifattur websit.