RAB Lighting FFLED39 Future Flood LED Light User Manual

1. Prodott Aktarview

The RAB Lighting FFLED39 Future Flood LED Light is a high-performance, energy-efficient outdoor floodlight designed for various applications. This hardwired fixture features a durable bronze finish and provides cool white illumination.

Figure 1: RAB Lighting FFLED39 Future Flood LED Light

Karatteristiċi ewlenin:

• Qawwa: 39-watt LED
• Temperatura tal-Kulur: 5100K Abjad Kessaħ
• It-tul tal-ħajja: 100,000 hours based on LM-80 tests
• LEDs: Three multi-chip 13-watt high-performance LEDs
• Ottika: NEMA type 7H x 6V with Air-flow technology heatsink
• Riflettur: Semi-specular anodized aluminum
• Gaskits: Silikon b'temperatura għolja
• Temm: Bronze chip and fade-resistant polyester powder coat
• Voltage: 120-volt to 277-volt operation

2. Informazzjoni dwar is-Sigurtà

Read all instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards. Keep this manual for future reference.

• Sigurtà Elettrika: L-installazzjoni għandha titwettaq minn elettriċista kwalifikat skont il-kodiċijiet elettriċi nazzjonali u lokali kollha. Kun żgur li l-provvista tal-enerġija tkun skonnettjata mis-circuit breaker qabel l-installazzjoni jew is-servizz.
• L-ertjar: The fixture must be properly grounded to prevent potential electric shock.
• Immuntar: Ensure the mounting surface is structurally sound and capable of supporting the fixture's weight (approximately 10.23 lbs).
• Temperatura operattiva: Tħaddemx l-apparat barra mill-medda ta' temperatura speċifikata tiegħu.
• LEDs: Do not stare directly into the LED light source when the fixture is operating, as this may cause eye damage.

3. Installazzjoni

This floodlight is designed for wall mounting and requires hardwired installation. Professional installation is recommended.

Għodod Meħtieġa:

• Tornavit (Phillips u flathead)
• prodotti għat-tqaxxir tal-wajer
• Tnalji
• Drill (if mounting surface requires pilot holes)
• Wrench aġġustabbli

Għażliet ta 'Immuntar:

The FFLED39 supports various mounting options. The standard fixture comes with a wall mount. Optional accessories may include slipfitter mounts or other specialized brackets.

Figura 2: Eżample of a Slipfitter Mount (optional accessory)

Passi ta' Installazzjoni:

1. Skonnettja l-Enerġija: Turn off power at the circuit breaker before beginning installation. Verify power is off using a voltagtester.
2. Ipprepara l-Wiċċ tal-Immuntar: Securely attach the mounting bracket to the desired wall location. Ensure the bracket is level and firmly fastened.
3. Konnessjonijiet tal-Wajer:
   • Connect the black wire from the fixture to the hot (L) wire from the power supply.
   • Connect the white wire from the fixture to the neutral (N) wire from the power supply.
   • Connect the green or bare copper wire from the fixture to the ground wire from the power supply.
   • Use appropriate wire connectors and ensure all connections are secure.
4. Fixture tal-Immonta: Attach the FFLED39 fixture to the mounting bracket. Secure it with the provided screws or bolts.
5. Aġġusta l-Għan: Loosen the adjustment screws on the fixture to aim the light as desired. Tighten the screws firmly once the desired angle is achieved.
6. Irrestawra l-Enerġija: Turn on power at the circuit breaker. Test the fixture for proper operation.

4. Operazzjoni

The RAB Lighting FFLED39 is a hardwired floodlight. Its operation is typically controlled by an external switch or a photocell (if installed).

Operazzjoni Standard:

• Once installed and wired, the fixture will illuminate when power is supplied via the connected wall switch or control system.
• Ensure the power source is within the specified 120-277V range.

Photocell Control (Optional):

If a photocell is integrated or installed with the fixture, the light will automatically turn on at dusk and off at dawn, based on ambient light levels.

Figura 3: Eżample of a Photocell (optional accessory)

5. Manutenzjoni

The FFLED39 LED floodlight is designed for minimal maintenance due to its long-life LED components and durable construction.

Tindif:

• Barra: Naddaf perjodikament il-barra tal-apparat b'ċarruta ratba u damp drapp biex tneħħi l-ħmieġ, it-trab, u l-fdalijiet. Tużax prodotti tat-tindif jew solventi li joborxu.
• Lenti: Gently wipe the lens with a clean, soft cloth to ensure maximum light output.

Spezzjoni:

• Periodically inspect the fixture for any signs of damage, loose connections, or wear.
• Ensure all mounting hardware remains tight and secure.
• If any damage is observed, disconnect power and contact a qualified electrician for repair or replacement.

6 Issolvi l-problemi

If you experience issues with your FFLED39 floodlight, refer to the following troubleshooting guide:

If the problem persists after following these steps, contact RAB Lighting customer support or a qualified electrician.

7. Speċifikazzjonijiet

Detailed technical specifications for the RAB Lighting FFLED39 Future Flood LED Light:

Figure 4: Indication of 100,000-hour LED lifespan

8. Garanzija u Appoġġ

Garanzija tal-Manifattur:

The RAB Lighting FFLED39 Future Flood LED Light is covered by a Garanzija ta' 1 snin mill-manifattur mid-data tax-xiri. Din il-garanzija tkopri difetti fil-materjali u l-abbilità taħt użu u servizz normali.

The warranty does not cover damage resulting from improper installation, accident, misuse, abuse, negligence, or unauthorized modification or repair.

Appoġġ għall-Klijent:

For technical assistance, warranty claims, or further information, please contact RAB Lighting customer support. Refer to the official RAB Lighting websit għad-dettalji ta' kuntatt attwali.