Xerox 7800/DX

Manwal tal-Utent tal-Printer tal-Lejżer bil-Kulur Xerox 7800/DX Phase

Model: 7800/DX | Brand: Xerox

Prodott Overview

The Xerox 7800/DX Phase Color Laser Printer is designed for professional environments requiring high-quality color printing and robust performance. This printer offers advanced capabilities for graphic-intensive tasks, including industry-leading media flexibility and professional color management technologies.

Xerox 7800/DX Phase Color Laser Printer with multiple paper trays

Figura 1: Quddiem view of the Xerox 7800/DX Phase Color Laser Printer, showcasing its multi-tray design and control panel.

Setup Istruzzjonijiet

1. Żpakkjar u Tqegħid

  • Carefully remove the printer from its packaging. Due to its weight (approximately 256 pounds), it is recommended to use appropriate lifting equipment or assistance.
  • Place the printer on a stable, level surface capable of supporting its weight and dimensions (27.52 x 25.24 x 37.52 inches). Ensure adequate ventilation around the unit.

2. Konnessjoni tal-Enerġija

  • Qabbad il-korda tal-enerġija mal-istampatur u mbagħad ma' sokit elettriku ertjat.
  • Agħfas il-buttuna tal-enerġija biex tixgħel l-istampatur.

3. Installazzjoni tal-Kartriġ tat-Toner

The Xerox 7800/DX uses separate toner cartridges for Black, Cyan, Magenta, and Yellow. Refer to the printer's internal diagrams for specific slot locations.

  1. Open the front access panel of the printer.
  2. Unpack each toner cartridge (compatible cartridges include 05R02801, 05R02802, 05R02803, 05R02804, 05R02805, 05R02806).
  3. Gently shake the cartridge to distribute the toner evenly.
  4. Daħħal kull kartriġ fl-islott korrispondenti tiegħu bil-kulur sakemm tikklikkja f'postu.
  5. Close the front access panel.
Close-up of a printer's internal components, possibly showing toner cartridge slots

Figura 2: Eżample of an internal printer view, indicating where toner cartridges are typically installed.

4. Tagħbija tal-Karta

The printer features multiple paper trays with a maximum input sheet capacity of 3140 sheets.

  1. Pull out the desired paper tray. The printer has 2 trays as standard.
  2. Adjust the paper guides to fit the paper size. The printer supports various sizes, including 8.5 x 11 inch and up to 11 inches in width.
  3. Load the paper (plain paper is supported) into the tray, ensuring it is flat and below the maximum fill line.
  4. Imbotta t-trej bil-mod lura fil-printer.
  5. Confirm the paper type and size on the control panel if prompted.

5. Installazzjoni ta' Software u Driver

To enable printing from your computer, install the necessary drivers.

  • The Xerox 7800/DX is compatible with PC, Mac, and Unix operating systems.
  • Visit the official Xerox support websit biex tniżżel l-aħħar sewwieqa għas-sistema operattiva tiegħek.
  • Segwi l-istruzzjonijiet fuq l-iskrin biex tlesti l-installazzjoni.
  • Connect the printer to your computer via USB or Ethernet cable.

Istruzzjonijiet Operattivi

1. Control Panel Overview

The printer features a touchscreen control panel for easy navigation and settings adjustment. Use the touch interface to access menus, check printer status, and configure print jobs.

Close-up of a printer's touchscreen control panel

Figura 3: Dettaljat view of the printer's touchscreen control panel, showing various menu options.

2. Stampar Bażiku

  1. Iftaħ id-dokument li tixtieq tipprintja fuq il-kompjuter tiegħek.
  2. Agħżel "Stampa" mill-menù tal-applikazzjoni.
  3. Choose the Xerox 7800/DX printer from the list of available printers.
  4. Aġġusta s-settings tal-istampar kif meħtieġ, bħal:
    • Kulur/Monokromu: The printer supports full color output with a maximum resolution of 1200 x 2400 dpi.
    • Stampar Duplex: Automatic dual-sided printing is supported.
    • Sors tal-Karta: Select the desired paper tray.
    • Kopji: Up to 312 copies per run.
  5. Click "Print." The printer has a maximum print speed of 45 pages per minute (ppm) for both color and monochrome. Initial page print time is 1-2 seconds.

3. Konnettività

  • Ethernet: Connect the printer to your network using an Ethernet cable for shared access.
  • USB: A single USB 2.0 port is available for direct connection to a computer.

Manutenzjoni

1. Toner Replacement

When a toner cartridge is low or empty, the printer's control panel will display a notification. Replace cartridges as follows:

  1. Open the front access panel.
  2. Neħħi l-iskartoċċ tat-toner vojt bir-reqqa billi tiġbdu dritt 'il barra.
  3. Unpack a new, genuine Xerox toner cartridge of the correct color.
  4. Shake the new cartridge gently.
  5. Insert the new cartridge into the corresponding slot until it locks into place.
  6. Close the front access panel.

2. Tindif

  • Barra: Imsaħ l-uċuħ ta 'barra b'artab, damp, lint-free cloth. Avoid abrasive cleaners.
  • Intern: Periodically clean the interior of the printer, especially around the paper path and toner area, using a dry, lint-free cloth or a specialized printer vacuum. Refer to the printer's on-screen instructions for specific cleaning procedures.

Issolvi l-problemi

This section addresses common issues you might encounter. For more detailed troubleshooting, consult the full service manual or contact Xerox support.

Kwistjonijiet Komuni u Soluzzjonijiet:

  • Il-Printer Mhux Qed Jirrispondi:
    • Iċċekkja l-konnessjonijiet tal-enerġija u kun żgur li l-istampatur huwa mixgħul.
    • Ivverifika l-konnessjonijiet tan-netwerk jew tal-kejbil USB.
    • Erġa' ibda kemm il-printer kif ukoll il-kompjuter tiegħek.
    • Kun żgur li d-drajver tal-printer korrett huwa installat u magħżul.
  • Kwalità Fqira tal-Istampar:
    • Iċċekkja l-livelli tat-toner u ibdel kwalunkwe kartuċċa baxxa.
    • Perform a print head cleaning or calibration from the control panel.
    • Kun żgur li qed tuża karta xierqa għas-settings tal-istampar tiegħek.
  • Ġammijiet tal-karti:
    • Follow the on-screen instructions on the control panel to locate and clear the jam.
    • Kun żgur li l-karta tkun mgħobbija sew u mhux mimlija żżejjed fit-trejs.
    • Neħħi kwalunkwe oġġett barrani mill-mogħdija tal-karta.

Speċifikazzjonijiet Tekniċi

KaratteristikaSpeċifikazzjoni
Isem tal-MudellXerox 7800/DX
Teknoloġija tal-IstamparLaser
Output PrinterKulur
Veloċità Massima tal-Istampar (Kulur/Monokromu)45 ppm
Riżoluzzjoni Massima tal-Istampar (Kulur/Monokromu)1200 x 2400 dpi
Stampar DuplexAwtomatiku
Kapaċità Massima tal-Folja tal-Input3140 folja
Numru ta' Trejs2
Daqs Massimu tal-Midja8.5 x 11 inch (up to 11 inches width)
Apparati KompatibbliPC, Mac, Unix
Teknoloġija tal-KonnettivitàEthernet, USB
Interface tal-ĦardwerUSB
Metodu ta' KontrollTouchscreen
Kapaċità tal-Ħżin tal-Memorja2048 MB
Dimensjonijiet tal-Prodott (L x W x H)27.52 x 25.24 x 37.52 pulzieri
Piż tal-oġġett256 liri
Komponenti InklużiPrinter bil-lejżer
Compatible Cartridge Numbers05R02801, 05R02802, 05R02803, 05R02804, 05R02805, 05R02806

Informazzjoni dwar Garanzija

The Xerox 7800/DX Phase Color Laser Printer comes with a full manufacturer's warranty. For specific terms and conditions, please refer to the documentation included with your product or visit the official Xerox websit.

Nota Importanti: All returns must be authorized by Xerox Corp. No exceptions.

Appoġġ għall-Klijent

For further assistance, technical support, or to access additional resources, please contact Xerox Customer Support or visit their official websit.

Tista' ssib aktar informazzjoni u riżorsi ta' appoġġ fuq Ħanut Xerox fuq Amazon or the main Xerox corporate websit.

© 2023 Xerox Corporation. Id-drittijiet kollha riżervati.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.