1. Istruzzjonijiet Importanti dwar is-Sigurtà
Jekk jogħġbok aqra u żomm dawn l-istruzzjonijiet importanti ta' sigurtà qabel ma tuża dan il-fann. Jekk ma ssegwix dawn l-istruzzjonijiet, dan jista' jirriżulta f'xokk elettriku, nar, jew korriment.
- Dejjem aqla’ l-fann mill-plagg tal-elettriku qabel ma tnaddfu, tagħmel manutenzjoni fuqu, jew iċċaqlaqh.
- Tħaddem ebda fann b'korda jew plagg bil-ħsara. Armi l-fann jew erġa' lura f'faċilità ta' servizz awtorizzata għal eżami u/jew tiswija.
- Tmexxix korda taħt it-twapet. Tgħattix il-korda b'twapet tat-twapet, runners, jew kisi simili. Irranġa l-korda 'l bogħod miż-żona tat-traffiku u fejn ma titfixkelx.
- This fan is intended for indoor, residential use only. Do not use outdoors or for commercial purposes.
- Do not insert fingers or any other objects through the fan guards when the fan is operating.
- Kun żgur li l-fann jitqiegħed fuq wiċċ stabbli u livellat biex tevita li jinqaleb.
- Superviżjoni mill-qrib hija meħtieġa meta kwalunkwe apparat jintuża minn jew qrib tfal jew individwi b'kapaċitajiet fiżiċi, sensorji jew mentali mnaqqsa.
2. Prodott Aktarview
The Air King 16-inch Oscillating Residential Pedestal Fan is designed to provide effective air circulation in various indoor settings. It features three speed settings, an oscillating function for wider coverage, and adjustable height and tilt for directional airflow.

Image: The Air King 16-inch Oscillating Residential Pedestal Fan, featuring a round base, an adjustable stand, and a fan head with a protective grille and three blades. The fan is gray in color.
Karatteristiċi ewlenin:
- 16-inch Blade Diameter: Provides substantial airflow.
- 3 Settings tal-Veloċità: Allows for customized airflow intensity.
- Funzjoni Oxxillanti: Jiddistribwixxi l-arja fuq żona usa'.
- Għoli aġġustabbli: Column height can be adjusted from 36 inches to 52 inches.
- Mejjel aġġustabbli: Fan head can be tilted 30 degrees up to 15 degrees down.
- Kostruzzjoni Durabbli: Features a powder-coated steel front guard and high-impact resistant plastic rear guard.
3. Istruzzjonijiet tal-Assemblea
Follow these steps to assemble your Air King Pedestal Fan:
- Assemblaġġ tal-Bażi: Place the fan base on a flat, stable surface. Insert the lower pole section into the base and secure it according to the included hardware (typically a large screw or knob from underneath the base).
- Arblu aġġustabbli: Insert the upper, adjustable pole section into the lower pole. Secure it with the provided locking mechanism or screw to prevent it from sliding down during initial setup.
- It-twaħħil tar-ras tal-fann: Carefully attach the fan head assembly to the top of the adjustable pole. Ensure it is securely fastened using the designated screw or locking pin.
- Guard and Blade Installation: If the fan guards and blades are not pre-assembled, follow the specific instructions provided in the packaging to attach the rear guard, then the fan blades, and finally the front guard. Ensure all clips or screws are tightened to secure the guards.
Once assembled, ensure all connections are tight and the fan is stable before plugging it in.
4. Istruzzjonijiet Operattivi
To operate your Air King Pedestal Fan, follow these steps:
- Konnessjoni tal-Enerġija: Plug the fan's power cord (NEMA 5-15P) into a standard 120V, 60Hz electrical outlet.
- Għażla tal-Veloċità: Locate the speed control knob or buttons, usually on the fan motor housing. Select your desired speed: 1 (low), 2 (medium), or 3 (high).
- Funzjoni ta 'Oxxillazzjoni: To activate oscillation, press down the oscillation knob located on top of the motor housing. To stop oscillation, pull the knob up.
- Aġġustament Għoli: To adjust the fan's height, loosen the height adjustment collar on the pole, raise or lower the upper pole section to the desired height (between 36 and 52 inches), and then securely tighten the collar.
- Aġġustament tal-inklinazzjoni: To adjust the fan head's angle, loosen the tilt adjustment knob or screw on the side of the fan head assembly. Tilt the head to the desired angle (30 degrees up to 15 degrees down) and then securely tighten the knob or screw.
- Itfi: To turn off the fan, set the speed control to the '0' or 'OFF' position. Unplug the fan from the outlet when not in use for extended periods.
5. Manutenzjoni
Manutenzjoni regolari tiżgura prestazzjoni ottimali u lonġevità tal-fann tiegħek.
Tindif:
- Dejjem aqla l-fann qabel it-tindif.
- Uża artab, damp drapp biex timsaħ l-uċuħ ta’ barra tal-fann. Tużax prodotti tat-tindif jew solventi li joborxu.
- To clean the fan blades and inside the guards, you may need to remove the front guard. Refer to the assembly instructions for guard removal. Carefully wipe the blades and interior surfaces with a damp drapp. Kun żgur li l-partijiet kollha huma niexfa għalkollox qabel ma terġa’ tgħaqqad u tħaddem il-fann.
- Tgħaddix il-fann fl-ilma jew tħalli l-ilma jqattar fil-kaxxa tal-mutur.
Ħażna:
Meta taħżen il-fann, speċjalment għal perjodi twal, għattih biex tipproteġih mit-trab. Aħżnu f'post frisk u niexef.
6 Issolvi l-problemi
Jekk tiltaqa' ma' problemi bil-fann tiegħek, irreferi għall-problemi u s-soluzzjonijiet komuni li ġejjin:
- Il-fann ma jixgħelx:
- Kun żgur li l-korda tal-enerġija hija mdaħħla sew f'sokit elettriku li jaħdem.
- Check if the speed control is set to an 'ON' position (1, 2, or 3).
- Ivverifika li s-circuit breaker jew il-fjus għas-sokit ma qabadx.
- Fan does not oscillate:
- Kun żgur li l-pum tal-oxxillazzjoni fuq nett tal-housing tal-mutur ikun ippressat 'l isfel.
- Check for any obstructions preventing the fan head from rotating.
- Fluss ta 'arja mnaqqas:
- Clean the fan blades and guards to remove dust and debris that may be obstructing airflow.
- Ensure the fan is set to a higher speed setting.
Jekk il-problema tippersisti wara li tipprova dawn is-soluzzjonijiet, ikkuntattja l-appoġġ għall-klijenti.
7. Speċifikazzjonijiet
| Speċifikazzjoni | Dettall |
|---|---|
| Brand | Re tal-Ajru |
| Numru tal-Mudell | 9126 |
| Dijametru tax-xafra | 16 pulzieri |
| Numru ta' Veloċitajiet | 3 |
| Voltage | 120V |
| Frekwenza | 60 Hz |
| Fluss ta' Arja (CFM) | 1580 (High) / 1420 (Medium) / 1220 (Low) |
| RPM | 1450 (High) / 1320 (Medium) / 1050 (Low) |
| Ampetà | 0.60 (High) / 0.50 (Medium) / 0.45 (Low) |
| Wattage | 77 (High) / 65 (Medium) / 57 (Low) |
| Għoli | Aġġustabbli minn 36 pulzieri sa 52 pulzier |
| Wisa' | 18 pulzieri |
| Tul | 18 pulzieri |
| Kulur | Griż |
| Materjal tal-Gwardja | Powder Coated Steel Front with High Impact Resistant Plastic Rear |
| Materjal tax-xafra | Polipropilene |
| Konfigurazzjoni tal-Plagg NEMA | 5-15P |
| Tul tal-kurdun | 6 pied. |
| Standards | ETL and OSHA Compliant Guards |
| Piż tal-oġġett | 0.93 Liri (madwar 14.9 uqija) |
| Tip ta' Materjal | Azzar Liga, plastik |
8. Garanzija u Appoġġ għall-Klijent
This Air King product is manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official Air King websit. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.
For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please contact Air King customer support. Contact details can typically be found on the product packaging or the manufacturer's official websit.