Omega Speedmaster Tachymeter Watch Model 323.30.40.40.04.001 User Manual

Introduzzjoni

The Omega Speedmaster Tachymeter Watch, model 323.30.40.40.04.001, is a precision automatic chronograph timepiece. It features a stainless steel case and bracelet, a fixed black ion-plated bezel with a tachymeter scale, and a white dial with luminous hands and index hour markers. Key functions include a date display and a chronograph with three sub-dials. The watch is equipped with an automatic movement and a scratch-resistant anti-reflective sapphire crystal.

Twaqqif u Operazzjoni Inizjali

Tkebbib tal-Għassa

This watch features an automatic movement. It is wound by the motion of your wrist. If the watch has stopped or has not been worn for an extended period, it can be manually wound by rotating the crown clockwise approximately 20-30 times while it is in the normal (pushed-in) position. This will provide sufficient power reserve to start the movement.

L-issettjar tal-Ħin u d-Data

1. Pull the crown out to position 2: This is the first click. Rotate the crown clockwise or counter-clockwise to set the date. Avoid setting the date between 9 PM and 3 AM to prevent damage to the movement.
2. Pull the crown out to position 3: This is the second click. Rotate the crown to set the hour and minute hands. To ensure accurate time setting, synchronize with a reliable time source. Push the crown back into position 1 (normal position) to engage the movement.

Operazzjoni tal-Kronografu

1. Ibda: Press the upper push-button to start the chronograph. The central chronograph seconds hand will begin to move.
2. Waqqaf: Press the upper push-button again to stop the chronograph. The elapsed time can be read from the central seconds hand, the 30-minute sub-dial, and the 12-hour sub-dial.
3. Irrisettja: After stopping the chronograph, press the lower push-button to reset all chronograph hands to zero.

Karatteristiċi Operattivi

Tachymeter Scale

The fixed black ion-plated bezel features a tachymeter scale. This scale allows you to measure speed over a known distance (e.g., 1 kilometer or 1 mile) or to measure production rates. To use, start the chronograph when passing the starting point. Stop the chronograph when passing the finishing point (e.g., 1 km mark). The number indicated by the central chronograph seconds hand on the tachymeter scale corresponds to the speed in units per hour (e.g., km/h or mph).

Reżistenza għall-Ilma

This watch is water resistant up to 100 meters (330 feet). It is suitable for swimming and snorkeling. Do not operate the crown or push-buttons while the watch is submerged in water. Ensure the crown is fully pushed in before any contact with water.

Manutenzjoni u Kura

Tindif

Biex tnaddaf l-arloġġ tiegħek, uża drapp artab u dryer.amp cloth. For the stainless steel bracelet, a soft brush with mild soapy water can be used, ensuring to rinse thoroughly with fresh water afterwards. Always dry the watch completely with a soft cloth. Avoid using harsh chemicals or abrasive materials.

Intervalli ta' Servizz

For optimal performance and longevity, it is recommended to have your Omega watch serviced by an authorized service center every 5-7 years. Regular servicing ensures the movement remains lubricated and sealed, maintaining its accuracy and water resistance.

Ħażna

When not wearing your watch, store it in a dry, cool place, away from direct sunlight and strong magnetic fields. The original watch box provides excellent protection.

Image: The Omega Speedmaster watch box and the accompanying operating instructions manual. This image illustrates the typical packaging and documentation provided with the watch.

Issolvi l-problemi

• L-arloġġ waqaf: If the watch has stopped, it may need to be manually wound. Rotate the crown clockwise 20-30 times in position 1. If the issue persists, the power reserve may be depleted, or servicing may be required.
• Data mhux qed tinbidel: Ensure the watch has sufficient power reserve. Avoid setting the date between 9 PM and 3 AM. If the date mechanism is stuck, consult an authorized service center.
• L-idejn tal-kronografu mhux qed jerġgħu jiġu rrisettjati għal żero: If the chronograph hands do not reset correctly, press the lower push-button firmly. If they remain misaligned, a service adjustment may be necessary.
• Kondensazzjoni taħt il-kristall: If condensation appears under the crystal, this indicates a breach in water resistance. Immediately take the watch to an authorized service center to prevent further damage.

Speċifikazzjonijiet

Image: A visual guide illustrating various watch case diameters. This chart helps in understanding the relative size of different watches, including the 40mm case diameter of this Omega Speedmaster model.

Garanzija u Appoġġ

Your Omega Speedmaster Tachymeter Watch is covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card provided with your purchase for specific terms, conditions, and duration. For warranty claims, service, or technical support, please contact an authorized Omega service center or your point of purchase. Unauthorized repairs or modifications may void your warranty.

For further assistance, visit the official Omega websit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom.