Manwal tal-Utent tal-Miter tal-Kurrent AC Eltako EVA12-32A

1. Introduzzjoni

This manual provides essential information for the safe and efficient use of the Eltako EVA12-32A AC Current Meter. Please read this manual thoroughly before installation and operation.

2. Informazzjoni dwar is-Sigurtà

TWISSIJA: Installation and maintenance of this device should only be performed by a qualified electrician. Incorrect installation can lead to electric shock, fire, or damage to the device and other equipment.

• Dejjem skonnettja l-enerġija qabel ma tinstalla jew tagħmel manutenzjoni fuq il-miter.
• Kun żgur li l-konnessjonijiet kollha huma siguri u jikkonformaw mal-kodiċijiet elettriċi lokali.
• Teċċedix il-kurrent u l-volum speċifikatitage ratings of the device.
• The device is designed for indoor use in dry environments.

3. Prodott Aktarview

The Eltako EVA12-32A is an AC current meter designed for DIN rail mounting. It measures active energy consumption and displays it on an integrated screen. The device stores consumption data in non-volatile memory.

Karatteristiċi ewlenin:

• Energy consumption display with integrated screen.
• Measures active energy as an AC current meter.
• Data stored in non-volatile memory.
• Low standby loss: only 0.5 W.
• Iddisinjat għall-immuntar fuq ferrovija DIN.

Figura 1: Eltako EVA12-32A AC Current Meter, showing the display and terminal connections from an angled perspective.

4. Installazzjoni

The Eltako EVA12-32A is designed for easy mounting on a DIN rail within an electrical panel. It is strongly recommended that installation be carried out by a qualified electrician.

Passi ta' Installazzjoni:

1. Skonnettjar tal-Enerġija: Qabel tibda, kun żgur li l-provvista ewlenija tal-enerġija għall-pannell elettriku hija skonnettjata kompletament. Ivverifika b'test tal-vultaġġ.tagtester.
2. Immuntar: Snap the meter onto the DIN rail in the desired position.
3. Wiring: Connect the phase (L) and neutral (N) wires according to the markings on the device.
• The terminals labeled L are for the input and output of the phase wire. The device measures current flowing through this connection. Ensure the cross-section of these wires is equal to or greater than the existing phase cable in the electrical panel.
• The terminal labeled N is for the neutral connection, which powers the meter. A smaller cross-section cable (e.g., 1.5mm²) can be used for this connection.
• Maximum cable size without terminals is 6mm². Note that the cable insertion depth is relatively small.
4. Konnessjonijiet sikuri: Tighten all terminal screws firmly to prevent loose connections, which can cause overheating or malfunction.
5. Restawr tal-Enerġija: Once all connections are secure and verified, restore power to the electrical panel.

Figura 2: Quddiem view of the Eltako EVA12-32A AC Current Meter, showing the digital display and control buttons.

5. Operazzjoni

After successful installation and power-up, the Eltako EVA12-32A will begin measuring and displaying energy consumption.

Wiri u Navigazzjoni:

• The integrated screen displays various parameters, including active energy (kWh), current (A), voltage (V), and power (W).
• Use the "MODE" and "SELECT" buttons (refer to Figure 2) to cycle through the displayed values and access historical data (e.g., hourly, daily, monthly, yearly consumption).
• The meter stores consumption data in non-volatile memory, ensuring data retention even during power outages.

Noti Importanti:

• The display is not backlit. For optimal readability, ensure the meter is installed in a well-lit area.
• This meter is not MID-certified and therefore not approved for monetary electricity billing in Europe. It is intended for informational purposes and internal consumption monitoring.

6. Manutenzjoni

The Eltako EVA12-32A is designed for maintenance-free operation. However, periodic checks are recommended.

• Tindif: If necessary, gently wipe the exterior of the meter with a dry, soft cloth. Do not use abrasive cleaners or solvents.
• Kontroll tal-Konnessjoni: Periodically, and only after disconnecting power, verify that all electrical connections remain tight and free from corrosion.
• Kundizzjonijiet Ambjentali: Kun żgur li l-ambjent operattiv jibqa' fil-firxiet speċifikati tat-temperatura u l-umdità.

7 Issolvi l-problemi

8. Speċifikazzjonijiet

• Mudell: EVA12-32A
• Manifattur: Eltako
• Tip: Miter tal-Kurrent AC
• Kurrent Max: 32 A
• Telf Standby: 0.5 W
• Dimensjonijiet (L x W x H): 9.1 x 7 x 2.5 ċm
• Piż: 5 gramma
• MID Conformity: Not applicable (not approved for monetary billing)
• Numru tal-Mudell tal-Oġġett: 4912093

9. Garanzija u Appoġġ

The Eltako EVA12-32A comes with a 1-year availability of spare parts. For warranty claims or technical support, please contact your retailer or the manufacturer directly.

For further assistance, please refer to the official Eltako websit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom.