Ultrak S149 Stopwatch/Printer Instruction Manual

Introduzzjoni

This manual provides detailed instructions for the proper use and maintenance of your Ultrak S149 Stopwatch/Printer. Please read this manual thoroughly before operating the device to ensure optimal performance and longevity.

Figura 1: The Ultrak S149 Stopwatch/Printer. This image displays the device's front panel, featuring a digital display, control buttons for lap/split, start/stop, clear, and recall functions, and the integrated thermal printer mechanism at the top. The brand "SEIKO" is visible on the device, indicating its origin or technology.

Kontenut tal-Pakkett

Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett tiegħek:

• Ultrak S149 Stopwatch/Printer Unit
• Lanyard
• Batteriji (installati minn qabel jew separati)
• 2 Rolls of Thermal Paper (approximately 600 lines each)

Setup

1. Installazzjoni tal-batterija

If batteries are not pre-installed, open the battery compartment located on the back of the unit. Insert the specified batteries, ensuring correct polarity. Close the compartment securely.

2. Installazzjoni tar-Romblu tal-Karta

1. Open the printer cover located at the top of the unit.
2. Insert a new thermal paper roll, ensuring the paper feeds correctly into the printing mechanism.
3. Agħlaq il-qoxra tal-printer.

3. Ixgħel

Locate the "POWER ON" switch, typically on the side or top right of the unit (refer to Figure 1). Slide the switch to the "ON" position. The display should illuminate.

Istruzzjonijiet Operattivi

Basic Stopwatch Functions

• Ibda/Waqqaf: Agħfas il- Ibda STOP button to begin timing. Press it again to pause or stop the timer.
• Ħin tad-dawra/maqsum: Waqt li l-istopwatch ikun qed jaħdem, agħfas il-buttuna LAP/SPLIT RESET button to record a lap or split time. The display shows three lines: split time, lap time, and running time.
• Irrisettja: After stopping the timer, press the LAP/SPLIT RESET button to clear the current timing data and prepare for a new measurement.
• Memorja ċara: Agħfas il- ĊARA button to erase all stored memory data.

Funzjonijiet tal-Memorja

The S149 can store and recall up to 300 split/lap times, segregated by event.

• Recall: Agħfas il- IFAKKAR buttuna biex view stored lap and split times. Use the navigation buttons (if available, typically associated with A/S SET or TIME) to scroll through the memory.
• User ID Function: The device includes a user ID function to separate data, allowing for organized storage of multiple event results. Refer to the on-screen prompts or specific button combinations for setting and utilizing user IDs.

Funzjonijiet tal-Istampar

The integrated thermal printer can print 13 digits per line at a speed of 1.5 lines per second.

• Printing Times: Lap or split times can be printed as a block. The device typically prints automatically when a lap/split is recorded, or there may be a dedicated print button (often combined with other functions like A/S SET or TIME).
• Funzjoni tal-Bidu Awtomatiku: The S149 features an auto start function, which can be configured to begin timing automatically under certain conditions. Consult the device's display or button combinations for activation.

Display tal-ħin u tal-kalendarju

The device can display the current time and calendar. Use the ĦIN button or mode selection to switch to time display mode. Settings for time and date are typically adjusted using the A/S SET button in conjunction with other controls.

Manutenzjoni

Tindif

Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents. Avoid exposing the device to excessive moisture.

Sostituzzjoni tal-batterija

Replace batteries when the display dims or the unit fails to power on. For the main battery, professional replacement may be recommended due to potential complexity. Printer batteries are typically user-replaceable.

Sostituzzjoni tar-Roll tal-Karta

When the paper roll is depleted, replace it with a new thermal paper roll as described in the Setup section. Ensure you use thermal paper compatible with the S149 printer.

Issolvi l-problemi

• L-apparat ma jixgħelx: Iċċekkja l-installazzjoni tal-batterija u kun żgur li l-batteriji mhumiex eżawriti.
• Id-displej huwa mudlam jew vojt: Ibdel il-batteriji.
• Printer not printing:
  • Ensure paper roll is correctly installed and not depleted.
  • Verify that thermal paper is being used (standard paper will not work).
  • In cold environments (below 0°C / 32°F), thermal printing performance may be significantly reduced or cease entirely. Operate the device within recommended temperature ranges.
• Ħin jew data mhux korretti: Adjust settings using the TIME and A/S SET buttons as per the operating instructions.
• Memory recall issues: Ensure memory has not been cleared. If issues persist, try clearing memory and re-testing.

Speċifikazzjonijiet

Garanzija u Appoġġ

The Ultrak S149 Stopwatch/Printer comes with a Garanzija ta' 3 snin. For warranty claims or technical support, please contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty validation.